Differences

This shows you the differences between two versions of the page.

--- wiki:network_mana:backhaul [2023/02/13 16:14]
ehe
+++ wiki:network_mana:backhaul [2024/03/07 13:49] (current)
ehe
@@ Line 222: / Line 222: @@
   * Multiple PIN code for multiple SIM card can be stored (using SIM card ICCID).
   * Usually SIM cards only need ''SIM PIN'' code to be unlocked but sometimes other types of PIN code can be used, as described in the example below.
+A file named ''/etc/network/ofono/default_provisioning'' contains several operators configuration (MCC, MNC, APN) for several countries. \\
+If the SIM used is already configured in this file, there is no need of configuring the APN the ''/etc/network/ofono/provisioning''.
+<note important>The PIN code, if set, still needs to be configured in ''/etc/network/ofono/provisioning''.</note>
+<note warning> On Wirnet iZeptoCell-Cellular, the APN that must be used is ''bicsapn''. It is pre-configured on this gateway and this configuration should not be changed
+</note>
 <file ini provisioning>
@@ Line 261: / Line 271: @@
 #service=<pin>                               # PH-SP pin
 #corp=<pin>                                  # PH-CORP pin
-# Default global APN for zcel platform
-[operator]
-internet.AccessPointName=bicsapn
 </file>
@@ Line 299: / Line 305: @@
 Call of script: ''# gsmdiag.py''
-Diagnosis output (wrong pin code case):
+Diagnosis output examples:
+++++ Modem ready to connect|
-<code bash>
-# gsmdiag.py
-Number of modems: 1
-[Modem:/sierra_1]
-  Powered:1
-  Online:0
-  Manufacturer:Sierra Wireless, Incorporated
-  Model:MC7304
-  Revision:SWI9X15C_05.05.39.02 r22713 carmd-fwbuild1 2014/06/19 16:48:58
-  [SimProps]
-    Present:1
-    CardIdentifier:89330120403002181830
-    SubscriberIdentity: property does not exist
-    LockedPins:dbus.Array([dbus.String(u'pin')], signature=dbus.Signature('s'), variant_level=1)
-    PinRequired:pin
-  Error: SIM code required (PIN, PUK, ...)
-Diagnostic written in /tmp/gsmdiag.txt
-</code>
-Diagnosis output (modem ready to connect):
 <code bash>
 # gsmdiag.py
@@ Line 355: / Line 340: @@
 Diagnostic written in /tmp/gsmdiag.txt
 </code>
+++++
+++++ SIM not detected|
+<code bash>
+# gsmdiag.py
+Number of modems: 1
+[Modem:/quectelqmi_2]
+  Syspath:/sys/devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1
+  HardwarePosition:internal
+  Powered:1
+  Online:1
+  Manufacturer:QUALCOMM INCORPORATED
+  Model:QUECTEL Mobile Broadband Module
+  Revision:EG25GGBR07A08M2G
+  [SimProps]
+    Present:0
+  Error: no SIM in modem (double checked with AT commands)
+Diagnostic written in /tmp/gsmdiag.txt
+</code>
+++++
+++++ SIM detected but not operational|
+<code bash>
+# gsmdiag.py
+Number of modems: 1
+[Modem:/quectelqmi_1]
+  Syspath:/sys/devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1
+  HardwarePosition:internal
+  Powered:1
+  Online:1
+  Manufacturer:QUALCOMM INCORPORATED
+  Model:QUECTEL Mobile Broadband Module
+  Revision:EG25GGBR07A07M2G
+  [SimProps]
+    Present:0
+  Error: SIM detected (ICCID: 8959102062181454741F) but not usable by Ofono
+Diagnostic written in /tmp/gsmdiag.txt
+</code>
+++++
+++++ Wrong pin code case|
+<code bash>
+# gsmdiag.py
+Number of modems: 1
+[Modem:/sierra_1]
+  Powered:1
+  Online:0
+  Manufacturer:Sierra Wireless, Incorporated
+  Model:MC7304
+  Revision:SWI9X15C_05.05.39.02 r22713 carmd-fwbuild1 2014/06/19 16:48:58
+  [SimProps]
+    Present:1
+    CardIdentifier:89330120403002181830
+    SubscriberIdentity: property does not exist
+    LockedPins:dbus.Array([dbus.String(u'pin')], signature=dbus.Signature('s'), variant_level=1)
+    PinRequired:pin
+  Error: SIM code required (PIN, PUK, ...)
+Diagnostic written in /tmp/gsmdiag.txt
+</code>
+++++
 == getmodeminfo.py tool ==
@@ Line 530: / Line 578: @@
 ifup eth0
 </code>
+===== Router Mode =====
+==== Purpose ====
+The aim of the router mode is to bring data connection to a sub-network thanks to a connection from a single gateway.
+Here is an example of how it could be used :\\
+{{:images:router_mode.jpg?850|}}
+==== Router configuring ====
+To activate the router mode on a gateway, some commands need to be made in the gateway console.
+Here are the commands :
+<code bash>
+# Activate router mode
+echo "ROUTER=yes" > /etc/default/localnet.conf
+# Edition of /etc/network/connman/main.conf to disable handling of eth0:
+NetworkInterfaceBlacklist = vmnet,vboxnet,virbr,ifb,eth1,wlan-adm,usb,eth0
+# Add eth0 to localnet handling by adding this line in /etc/udev/rules.d/localnet.rules
+SUBSYSTEM=="net", KERNEL=="eth0", RUN+="/etc/udev/scripts/localnet.sh"
+# Make sure this config is saved in case of firmware upgrade
+echo "/etc/udev/rules.d/localnet.rules" > /etc/sysupgrade.d/localnet.conf
+</code>
+These commands need to be made on the gateway which will host the connection only. Nothing has to be done on other gateway(s).\\
+A reboot of the gateway is needed to apply this configuration. You can do so with the command ''reboot''
+The host gateway can now provide data connection locally to another gateway or to multiple gateways thanks to an ethernet switch. \\
+Local connections to the switch can be:
+  * Ethernet and/or
+  * WLAN

Wirnet™ i-series

User Tools

Site Tools

Differences

Page Tools