Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== FAQ - Static IP configuration ======



===== How to configure Static IP assignment for my gateway ? =====

<note important>**The Static IP assignment must be done for a gateway from "scratch" (only FW is available). \\ It is not recommanded to desactivate DHCP while connecting to the WMC. \\ This can imply a connection loss to the WMC.**</note> 

Changing the network configuration  throught the WMC dashboard is not recommanded. Doing this through the local configuration is the good way since DNS configuration cannot be done through the dashboard.

For **Wirnet Station**, you can change default DNS servers (212.30.96.123, 213.203.124.147) that are currently obsolete by using the following package  
{{ :wiki3:custo_change_nameservers.tar.gz |}}. \\ 
This package replaces default DNS servers by Google ones (8.8.8.8, 9.9.9.9). Use it before proceeding to any system upgrade or changing IP assignment from dynamic to static. 
Then setup IP assigment via a SSH connection or debug link. \\
You can also set DNS and IP assignment in one shot by modifying the local setup.
 
For KerOS systems (**Wirnet iBTS, Wirnet iFemtoCell**), you should issue a SSH connection to setup gateway IP assigment and DNS servers addresses.\\ 

Refer to specific Wiki to setup static IP for your gateway: \\ \\
Wirnet Station: [[http://wikikerlink.fr/lora-station/doku.php?id=wiki:faq#how_to_configure_static_ip_address]] \\ 
Wirnet iBTS: [[http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:backhaul_3.3.3]] \\ 
Wirnet iFemtoCell: [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:network_3.4.4]]

Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools