Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== v3.2 Gateway Software Releases ======
\\
\\
This version is designed to **upgrade a system with a KerOS 4.x installed** (3.1 embedded software).

To update a system which KerOS version is lower than 4.x, the **liveburner 4.0** available  [[http://wikikerlink.fr/wanesy-ran/doku.php?id=wiki:wiki3:gateway_sw_3.1#download|here]] need to be applied first before applying the current update.

To update a system from KerOS 4.x, either install packages from USB stick or copy the megapackage in the folder ///user/.updates// on the gateway and deflate it or use the [[.magic_link|magic link]].

https://wikikerlink.fr/wanesy-ran/doku.php?id=playground:wiki3:gateway_sw_3.2&do=
This release version is designed for:

  * **Wirnet iBTS**,
  * **Wirnet iFemtoCell**,
  * **Wirnet iStation**.

<note important>**CAUTION with gateways that are statically IP assigned** \\
You may loose the WMC connection! Follow the procedure described [[wiki:wiki3:faq_gw_upgrade_3.2#how_to_upgrade_my_gateway_that_is_static-ip_assigned_with_32_embedded_software|here]]</note>


For the **Wirnet Station**, the 3.1 SW release must be used to connect a Wirnet Station to the WMC server v3.2. 

For lucky owners of **Wirnet iFemtoCell-evolution**, please refer to [[wiki:wiki3:gateway_sw_3.3|this specific software]].


<note important>**CAUTION: \\ \\
Theses packages are only dedicated to connect gateways to WMC v3.2. \\ They are not intended to be used with WMC 2.3, 3.0 or 3.1.**
</note>

===== Download =====

^ Product                 ^ Megapackage        ^md5sum      ^                         
| **Wirnet iBTS \\ Wirnet iFemtoCell \\ Wirnet iStation** | \\ {{ :wiki3:wmc_megapackage_for_keros_v3.2.5.tar.gz |}} | \\ 07344dade5adcf7dc6d2f36212b6425f |
| **Wirnet Station** | {{ :wiki3:fwupgrade_wirmav2_wirnet_v3.6_wmc_v3.1.6.tar.gz | fwupgrade_wirmav2_wirnet_v3.6_wmc_v3.1.6.tar.gz}}  | b74737609413bb65b5f68716568da150 |
\\
\\
==== Megapackage Content ====

For **all products except the Wirnet Station**:
^Component ^Version ^	
| **keros**	| 4.1.6    |	
| **bscc**	| 3.2.4    |	
| **lorasnmp**  | 3.2.4    |	
| **lorad**	| 1.1.5-2  |	
| **lorafwd**	| 1.1.1-2  |	

For the **Wirnet Station**:
^Component ^Version ^	
| **keros**	| 3.6    |	
| **bscc**	| 3.1.6    |	
| **lorasnmp**  | 3.1.6    |	
| **lorad**	| 1.0.5-2  |	
| **lorafwd**	| 1.0.7-2  |	
\\
\\
===== Software update over ethernet =====
\\
This procedure can be used to **UPGRADE from a KerOS 4.x system** on a **single** gateway. \\

To update your gateway, apply the following procedure:
  - Request your VPN package(s) to the Kerlink Support team: [[support@kerlink.fr]] (optional: in case of a First Install or Migration)
  - Transfer package(s) in this directory: <code bash>
# From a computer:
scp WMC_embedded_keros_v3.3.5.tar.gz openvpn-*.ipk root@<ip_address>:/user/.updates/
</code>
  - Deflate archive and ensure file is correctly written: <code bash># On the gateway:
cd /user/.updates
tar -xzf *.tar.gz
rm -f WMC*.tar.gz
sync </code>
  - Trigger Update for next reboot: <code bash>kerosd -u </code>
  - Restart: <code bash>reboot</code>

\\
Refer to [[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_update_over_network|software update procedure]] for further details.

\\
===== Software update over USB ===== 
\\
==== For all products except the Wirnet Station ====
\\
This procedure used for automatic deployment can be used to **UPGRADE from a KerOS 4.x system** (embedded software 3.1.x) on a **single** or a **group of gateways**. \\
If you want to install this sotfware from a KerOS 3.x, you need to install a KerOS 4.0 before upgrading your system. 


**You need to use 1 or 2 USB sticks depending on your FW version **. \\ \\
 **If your KerOS version is lower than 4.0 then you will need to create 2 USB sticks.** \\


^                   ^     FW 3.1        ^    FW 3.4     ^    FW 4.0  ^    FW 4.1   ^
| Nb of USB sticks    |     2     |     2        |    1        |    1    |

When using 2 USB sticks: \\
 
  * The **first USB stick** will upgrade the firmware to **KerOS 4.2**. 
  * The **second USB stick** will **install all others packages** with the required release: BSCC, SNMP, Common Packet Forwarder (CPF) and OpenVPN packages.

When using a single USB Stick: \\

  * Put the file .tar.gz on your USB stick and decompress all the stuff in the root directory.

To update your system from a KerOS 4.x system, use the following software:

^description                 ^file        ^md5sum      ^
|**USB stick ** | {{ wiki3:auto_deploy_3.3.5_keros_usb_stick.tar.gz | AUTO_DEPLOY_3.3.5_KEROS_USB_STICK.tar.gz }} |  b1a144d2cf9ec866b4c6fd97f44a2c7c  |
The same USB stick can be used twice.

**The .tar.gz file provided below is "ready-to-use"**. 
You only need to copy your OpenVPN packages on the USB stick: your OpenVPN secrets files in //vpn_packages// directory and your OpenVPN config file in the //COMMON// directory to be able to connect properly to your WMC server.

\\
To update your gateway, apply the following procedure :

> 1. Deflate twice the tar.gz file to get .ipk files and put them on your USB stick in the root directory
> 2. Copy all files located in the folder AUTO_DEPLOY_3.2.5_KEROS_USB_STICK in the root directory
> 3. Request your VPN package(s) to the Kerlink Support team: [[support@kerlink.fr]] (optional: in case of a First Install or Migration)
> 4. Put your VPN config packages in the //COMMON// directory to connect to YOUR WMC server (optional: in case of a First Install or Migration)
> 5. Put your VPN secrets packages of your KerOS products in the //vpn_packages// directory (optional: in case of a First Install)
> 6. Plug the USB stick in the gateway USB slot (device must be powered on)
> 7. Wait the end of the update 
> 8. Plug the second USB stick in the gateway USB slot (if needed)
> 9. Wait the end of the update (if needed)

Refer to the specific wiki to get more details about software update over USB: \\ 
**Wirnet Product Line (iBTS, iFemtocell, iStation)**: [[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_update_over_usb]] \\
\\
\\
==== For the Wirnet Station ====

The update procedure uses 2 USB sticks: \\
 
  * The **first USB stick** will upgrade the firmware to **KerOS 3.6.** 
  * The **second USB stick** will install **all others packages** with the required software release: BSCC, SNMP, Common Packet Forwarder (CPF) and OpenVPN packages.

^description                 ^file        ^md5sum      ^
|**USB stick number 1** | {{:wiki3:auto_deploy_3.1.6_usb_stick_1.tar.gz | AUTO_DEPLOY_3.1.6_USB_STICK_1.tar.gz}} | 6c31bebc9f2942bb852adecd74a57284 |
|**USB stick number 2** | {{:wiki3:auto_deploy_3.1.6_usb_stick_2.tar.gz | AUTO_DEPLOY_3.1.6_USB_STICK_2.tar.gz}} | 0835b621155886559b19dc46604e4cc7 |

> 1. Deflate twice the tar.gz file on each USB stick in the root directory
> 2. Copy files located in the folder AUTO_DEPLOY_3.1.6_USB_STICK_x in the root directory
> 3. Add your OpenVPN packages in AUTO_DEPLOY_3.1.6_USB_STICK_2 before plugging the stick into the system.
> 4. Plug the first USB stick in the gateway USB slot
> 5. Wait the end of the update
> 6. Plug the second USB stick in the gateway USB slot
> 7. Wait the end of the update



Refer to the specific wikis to get more details (ex led management) about software update via USB sticks: \\ \\
Wirnet Station: [[http://wikikerlink.fr/lora-station/doku.php?id=wiki:updates#usb_update_recommended]]
\\
\\

==== USB stick content ====

The USB tree should contains the following files/folders:

<code>
/               
├── COMMON                                                # KerOS products packages folder (iBTS, iFemtoCell, iStation)
│   ├── keros_***_klkgw.ipk                               # Keros firmware package for Wirnet iBTS
│   ├── bscc_***_klkgw.ipk                                # WMC BSCC package for Wirnet iBTS
│   ├── lorasnmp_***_klkgw.ipk                            # WMC SNMP package for Wirnet iBTS
│   ├── lorad_***_klkgw.ipk                               # HAL package for Wirnet iBTSpk
│   ├── lorafwd_***_klkgw.ipk                             # Packet Forwarder package for Wirnet iBTS
│   └── openvpn_config_wmcbeta.wanesy.com_3.1.ipk         # sample file: the WMC server to connect to
├── README.txt                                            # This file
├── usb.autorun                                           # executed by KerOs products when plugging the USB stick
├── usbkey.txt                                            # USB key protection: must contain the device passwords (all of them)
└── vpn_packages                                          # WMC OpenVPN packages folder
    ├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk            # OpenVPN package for one KerOS product to connect to a WMC platform (here wmcbeta)
    ├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk            # another package for one KerOS product to connect to a WMC platform (here wmcbeta)
    ├── openvpn_secrets***_wmcbeta.wanesy.com_***.ipk             # ...
    ├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk            # ...
    ├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk            # ...
    ├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk            # ...
    └── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk            # ...

</code>
\\
\\
===== Changelog =====

Corrections are listed below:

<code>
- iStation gateway support
- New power management for iStation
- Backhaul configuration improvement
</code>

===== Restrictions =====
<code>
- Spectral scan with LBT mode enabled does not work properly
</code>

\\
\\

===== Warranty =====

<note important>
**CAUTION ABOUT WARRANTY:** \\
**Kerlink is not responsible for damage arising from failure to follow these instructions relating to the Kerlink Product’s use.**
</note>
Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools
