Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Wirnet Station embedded sofware 3.1.8 ======

<note important> This version is designed to connect Wirnet Station gateways to **WMC server 3.2 or greater** \\
They are not intended to be used with WMC servers 2.3, 3.0 or 3.1.</note>

\\
===== Download =====

^  Package                                                 ^   md5sum      ^                         
| {{ :wiki3:fwupgrade_wirmav2_wirnet_v3.6_wmc_v3.1.8.tar.gz | fwupgrade_wirmav2_wirnet_v3.6_wmc_v3.1.8.tar.gz}}  | b74737609413bb65b5f68716568da150 |

\\
The content of this package is listed below:

^Component ^Version ^	
| **keros**	| 3.6    |	
| **bscc**	| 3.1.6    |	
| **lorasnmp**  | 3.1.4    |	
| **lorad**	| 1.1.5-1  |	
| **lorafwd**	| 1.1.3-2  |

\\
There are 3 ways to update your gateway's software:
  * by using the [[.magic_link|Magic link]]
  * by using an [[.gateway_sw_wista_3.1.8#software_update_over_usb|USB stick]]
  * over WMC dashboard, by using the [[wiki:wiki3:install_upgrade#wmc_drag_n_drop_feature|Drag and drop feature]]
\\
\\
===== Software update over USB ===== 

<note tip>TODO clé à mettre à jour</note>

The update procedure uses 1 USB stick will upgrade the firmware to **KerOS 3.6 and will install all others packages with the required software release: BSCC, SNMP, Common Packet Forwarder (CPF) and OpenVPN packages (see the version numbers above).

^description                 ^file        ^md5sum      ^
|**USB stick ** | {{ :wiki3:auto_deploy_wista_3.1.8_usb_stick.tar.gz | AUTO_DEPLOY_WISTA_3.1.8_USB_STICK.tar.gz}} | dbe42f3f6cc6f5aa25ad238b81357e2a |


> 1. Deflate twice the tar.gz file on each USB stick in the root directory
> 2. Copy files located in the folder AUTO_DEPLOY_WISTA_3.1.8_USB_STICKin the root directory
> 3. Add your OpenVPN packages in AUTO_DEPLOY_WISTA_3.1.8_USB_STICK before plugging the stick into the system.
> 4. Plug the first USB stick in the gateway USB slot
> 5. Wait the end of the update



Refer to the specific wikis to get more details (ex led management) about software update via USB sticks: \\ \\
Wirnet Station: [[http://wikikerlink.fr/lora-station/doku.php?id=wiki:updates#usb_update_recommended]]
\\
\\

==== USB stick content ====

The USB tree should contains the following files/folders:

<code>

/
├── autorun_klk.sh                                       # executed by Wirnet Stations when plugging the USB stick
└── tmp                                                  # tmp directory  
    ├── dota_app.tar					 # contains: dota_v3.1.6_bscc.tar.gz, dota_v3.1.4_snmp.tar.gz, dota_cpf_1.1.8-2.tar.gz and custo_knetd-4.12.tar.gz
	├── initramfs.cpio.gz.ubot			 # init ramfs
	├── script_uboot.img				 # U-Boot bootloader
	└── uImage					 # linux kernel
├── _produsb.sh                                          # executed by Wirnet Stations after rebooting (will flash the software)
├── README                                               # This file
└── vpn_packages                                         # WMC OpenVPN packages folder
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz   # OpenVPN package for one Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz   # OpenVPN package for one Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz   # OpenVPN package for one Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz   # another Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz   # ...
    └── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz   # ...
  
</code>
\\

===== Changelog =====

Main changes regards to the 3.1.6 embedded software are listed below:

  * Change the embedded CPF version from 1.0.9 to 1.1.8

Please note that, if gateways use public IP, it also makes your gateway accessible from Internet on open SSH or HTTP ports (protected by passwords). Kerlink so recommends to change passwords as described in [[https://wikikerlink.fr/lora-station/doku.php?id=wiki:security|Connection, login and credentials]]
\\
\\
===== Warranty =====

<note important>
**CAUTION ABOUT WARRANTY:** \\
**Kerlink is not responsible for damages resulting from failure to follow these instructions relating to the Kerlink Product’s use.**
</note>
Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools
