Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== RAN v2.2 ======

**It is recommended to use the MEGAPACKAGE that installs all mandatory packages onto your system** (BSCC, SNMP, LIBLORAGW-FPGA, SPF).
This package preserves any change to your current network configuration (VPN and GSM/ETH configuration).
This megapackage can be used as well remotely (from RAN dashboard for instance) and locally (USB, debug link, SSH).

^ Product           ^ Megapackage |         
| iBTS                    | {{ :wiki:ran_gateway_lpbs_v2.2.1.tar.gz |}} |                               
| Wirnet Station          | {{ :wiki:dota_ran_gateway_v2.2.2.tar.gz | dota_ran_gateway_v2.2.2.tar.gz}} | 
| ifemtoCell              | {{ :wiki:ran_gateway_wifc_v2.2.1.tar.gz | ran_gateway_wifc_v2.2.1.tar.gz}} | 

To update your system, you can use the "drag&drop" software update feature from the RAN dashboard interface.

<note important>
**IT IS RECOMMENDED TO HAVE A DHCP DEFINED IN YOUR LOCAL NETWORK** \\
Using static IP can lead to a connection issue to the RAN
</note>


<note important>
**It is recommended to update the OpenVPN package to v1.11 before using the megapackage**
</note>

<note important>
**For Wirnet Station**, if your **BSCC** and **SNMP** packages are RAN 2.0 compatible **(v1.13)**, you must **first install the RAN 2.1 packages (v2.1)** before using the megapackage.
</note>

<note important>
**FOR THE WIRNET STATION \\
DO NOT USE THE MEGAPACKAGE IF YOUR FIRMWARE VERSION IS LOWER THAN v3.1 **\\
Use the "create_dota_2x_wirnet3.sh" to migrate to v3.x firmware version
</note>

<note important>
**For ifemtocell**, before installing the megapackage, you should **remove the old libloragw** by installing the following special package on your system :   {{ :wiki:libloragw-remove-backup.ipk |}} \\
Don't be afraid by the following message: "-- Remove package from libloragw-remove.ipk: ERROR (255)": that simply indicates that the package is not present in the backup storage.
</note>

<note important>
**The megapackage does not contain any OpenVPN certificate**. If you install this megapackage without RAN connection (i.e you never installed any OpenVPN certificate on your system), you should ask for an OpenVPN certificate to ''support@kerlink.fr'' and install it on your system. In this case, you need to install these packages (OpenVPN certificate and megapackage) via a local access (USB, debug link, SSH). \\
</note>

<note important>
**For Keros sytems** (Wirnet iBTS and Wirnet iFemtoCell), **if you use the scp command**, don't forget to **dezip and uncompress the mega-package** before upgrading the system !  ''tar xvf *ran_gateway*.tar.gz''
</note>




===== Compatibility Matrix =====

You can manually install your packages individually by selecting the packages you want to update on to your system as specified in the compatibility matrix :


^ Product           ^ BSCC ^ SNMP ^ Firmware           ^ LoRa HAL              ^ Packet Forwarder ^ VPN                                             ^
| iBTS              | {{ :wiki:bscc_v2.2.1_klk_lpbs.ipk | bscc_v2.2.1}} | {{ :wiki:lorasnmp_v2.2.1_klk_lpbs.ipk | snmp_v2.2.1}}| [[http://wikikerlink.fr/wirnet-ibts/doku.php?id=resources:resources_keros_fw_3.1.16|keros 3.1.16]] |  {{ :wiki:libloragw2_5.1.0-klk1_klk_lpbs.ipk | libloragw2_5.1.0-klk1 }} | {{ :wiki:spf2_5.1.0-klk2_5.1.0-klk1_klk_lpbs.ipk | spf2_5.1.0-klk2_5.1.0-klk1 }}  | 1.11 |
| Wirnet Station    | {{ :wiki:dota_v2.2.1_bscc.tar.gz | dota_v2.2.1_bscc}} | {{ :wiki:dota_v2.2.1_snmp.tar.gz | dota_v2.2.1_snmp}} | firmware 3.3 (not available yet) | {{ :wiki:custo_libloragw-fpga_4.1.3-klk7_wirnet.tar.gz |custo_libloragw-fpga_4.1.3-klk7_wirnet}}  | {{ :wiki:dota_spf_3.1.0-klk15_4.1.3-klk7_wirnet.tar.gz |spf_3.1.0-klk15_4.1.3-klk7_wirnet}} | 1.11                                            |
| Wirnet iFemtoCell | {{ :wiki:bscc_v2.2.1_klk_wifc.ipk | bscc_v2.2.1_wifc}} | {{ :wiki:lorasnmp_v2.2.1_klk_wifc.ipk | lorasnmp_v2.2.1_wifc}} | [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:resources_fw_3.1.14|keros 3.1.14]]  | {{ :wiki:libloragw-fpga_4.1.3-klk7_klk_wifc.ipk |libloragw-fpga_4.1.3-klk7_klk_wifc}}  | {{ :wiki:spf_3.1.0-klk15_4.1.3-klk7_klk_wifc.ipk |spf_3.1.0-klk15_4.1.3-klk7_klk_wifc}}  | 1.11                                             |

<note important>
**For ifemtocell**, before installing the libloragw-fpga_4.1.3-klk7_klk_wifc.ipk,you should  **remove the old libloragw** by installing the following special package on your system: {{ :wiki:libloragw-remove-backup.ipk |}}\\
Don't be afraid by the following message: "-- Remove package from libloragw-remove.ipk: ERROR (255)": that simply indicates that the package is not present in the backup storage).
</note>

===== Main Changes =====

  * Full support of Class C end-devices
  * New packet forwarder KPIs
          * Uptime per period of time
          * Number of restarts per period of time
  * Workflow editor
  * Spectrum analysis support for Wirnet Stations
  * Display of all uplink and downlink messages for each end-device
  * Per-cluster payload encoding using HEX or BASE64
  * Improved CSV export of gateways and end-devices
  * Enhanced mass creation or deletion of gateways or end-devices


===== Main Improvements =====

  * RAN interface automatic page refresh doesn’t generates random “Server error” messages
  * Cluster configuration update does not need push password to be filled in
  * Superadmin role is not limited on alarms menu
  * RNC cluster filter is working
  * Wirnet Station KPI “Downlink bytes” is supported
  * Wirnet Station VPN/Supervision configuration doesn’t update gateway onboard parameters
  * Https can be configured within the push URL using the dashboard


===== Main Restrictions =====

  * Trusted Key Management is not fully supported
  * VPN IP address modification is not displayed on dashboard
  * Spectrum analysis is not supported on Wirnet iFemtoCells
  * RX timestamp not available when GPS is not locked
  * Unknown gateway interface label is sometimes displayed
  * RNC raw radio configuration update doesn’t indicate ignored changes
Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools
