Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<note important>IMPORTANT Firmware UPGRADE!!\\
The new firmware **wirmaV2_wirgrid_v2.x** is mandatory with the "27dBm LoRa IoT Stations"\\
The Semtech LoRa HAL has to be rebuilt in version v2.0.0 or upper, with the compilation flag **CFG_BRD= kerlink_868_27dbm** \\
</note>
====== Distribution ======
The distribution provided on the station is generated by Kerlink. Inside:
  * u-boot-2009.03, the bootloader ;
  * linux-3.10.x, the kernel ;
  * busybox-1.18.5, which provides basic tools ;
  * buildroot-2011.08, to generate the applications present in the filesystem ;
  * M2M daemon developed by Kerlink ;
  * tools developed by Kerlink, available in /usr/local/bin/ on the filesystem..
 
++++Below the file .config of Buildroot :|
<file .config_buildroot>
BR2_arm=y
BR2_arm926t=y
BR2_SOURCEFORGE_MIRROR="freefr"
BR2_JLEVEL=4
BR2_TOOLCHAIN_EXTERNAL=y
BR2_ENABLE_LOCALE_PURGE=y
BR2_ENABLE_LOCALE_WHITELIST="C"
BR2_TARGET_OPTIMIZATION="-mcpu=arm926ej-s -mfpu=vfp -mfloat-abi=softfp"
BR2_TARGET_GENERIC_HOSTNAME="Wirgrid"
BR2_TARGET_GENERIC_ISSUE="Welcome On Kerlink Wirgrid Board"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y
BR2_ROOTFS_DEVICE_TABLE="board/kerlink/wirgrid/device_table.txt"
BR2_ROOTFS_SKELETON_CUSTOM=y
BR2_ROOTFS_SKELETON_CUSTOM_PATH="board/kerlink/wirgrid/rootskel"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/kerlink/wirgrid/customize_fs.sh"
BR2_PACKAGE_BUSYBOX_CONFIG="board/kerlink/wirgrid/busybox-1.18.x.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_CUSTOMIZE=y
BR2_PACKAGE_DOSFSTOOLS=y
BR2_PACKAGE_DOSFSTOOLS_MKDOSFS=y
BR2_PACKAGE_DOSFSTOOLS_DOSFSCK=y
BR2_PACKAGE_E2FSPROGS=y
# BR2_PACKAGE_E2FSPROGS_CHATTR is not set
# BR2_PACKAGE_E2FSPROGS_DUMPE2FS is not set
# BR2_PACKAGE_E2FSPROGS_E2FREEFRAG is not set
# BR2_PACKAGE_E2FSPROGS_E2LABEL is not set
# BR2_PACKAGE_E2FSPROGS_E2UNDO is not set
# BR2_PACKAGE_E2FSPROGS_FILEFRAG is not set
# BR2_PACKAGE_E2FSPROGS_FINDFS is not set
# BR2_PACKAGE_E2FSPROGS_LOGSAVE is not set
# BR2_PACKAGE_E2FSPROGS_LSATTR is not set
# BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND is not set
# BR2_PACKAGE_E2FSPROGS_TUNE2FS is not set
# BR2_PACKAGE_E2FSPROGS_UUIDGEN is not set
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_MEMTESTER=y
BR2_PACKAGE_MTD=y
# BR2_PACKAGE_MTD_FLASHCP is not set
# BR2_PACKAGE_MTD_FLASH_INFO is not set
# BR2_PACKAGE_MTD_FLASH_LOCK is not set
# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set
# BR2_PACKAGE_MTD_MTD_DEBUG is not set
# BR2_PACKAGE_MTD_NANDTEST is not set
# BR2_PACKAGE_MTD_MTDINFO is not set
# BR2_PACKAGE_MTD_UBIATTACH is not set
# BR2_PACKAGE_MTD_UBICRC32 is not set
# BR2_PACKAGE_MTD_UBIDETACH is not set
# BR2_PACKAGE_MTD_UBIFORMAT is not set
# BR2_PACKAGE_MTD_UBIMKVOL is not set
# BR2_PACKAGE_MTD_UBINFO is not set
# BR2_PACKAGE_MTD_UBINIZE is not set
# BR2_PACKAGE_MTD_UBIRENAME is not set
# BR2_PACKAGE_MTD_UBIRMVOL is not set
# BR2_PACKAGE_MTD_UBIRSVOL is not set
# BR2_PACKAGE_MTD_UBIUPDATEVOL is not set
BR2_PACKAGE_UBOOT_TOOLS=y
BR2_PACKAGE_USBUTILS=y
BR2_PACKAGE_OPENSSL_BIN=y
BR2_PACKAGE_SQLITE=y
BR2_PACKAGE_SQLITE_READLINE=y
BR2_PACKAGE_EXPAT=y
BR2_PACKAGE_LIBXML2=y
BR2_PACKAGE_BRIDGE=y
BR2_PACKAGE_DROPBEAR=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_LIGHTTPD=y
BR2_PACKAGE_LIGHTTPD_OPENSSL=y
BR2_PACKAGE_LIGHTTPD_ZLIB=y
BR2_PACKAGE_LIGHTTPD_BZIP2=y
BR2_PACKAGE_NTP=y
BR2_PACKAGE_NTP_SNTP=y
BR2_PACKAGE_NTP_NTPDATE=y
BR2_PACKAGE_NTP_NTPQ=y
BR2_PACKAGE_PPPD=y
BR2_PACKAGE_SOCAT=y
BR2_PACKAGE_TCPDUMP=y
BR2_PACKAGE_VSFTPD=y
BR2_PACKAGE_LOGROTATE=y
BR2_PACKAGE_SYSVINIT=y
# BR2_PACKAGE_OJEC is not set
BR2_TARGET_ROOTFS_TAR_GZIP=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git@gitlab.klklan.fr:wirgrid/linux.git"
BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="wirgrid-1.0-rc2"
BR2_LINUX_KERNEL_DEFCONFIG="wirgrid"
</file>
++++
++++Below the file .config of Busybox :|
<file .config_busybox>
#
# Automatically generated make config: don't edit
# Busybox version: 1.18.5
# Wed Jun 19 09:58:43 2013
#
CONFIG_HAVE_DOT_CONFIG=y

#
# Busybox Settings
#

#
# General Configuration
#
# CONFIG_DESKTOP is not set
# CONFIG_EXTRA_COMPAT is not set
CONFIG_INCLUDE_SUSv2=y
# CONFIG_USE_PORTABLE_CODE is not set
CONFIG_PLATFORM_LINUX=y
# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
CONFIG_SHOW_USAGE=y
CONFIG_FEATURE_VERBOSE_USAGE=y
CONFIG_FEATURE_COMPRESS_USAGE=y
CONFIG_FEATURE_INSTALLER=y
# CONFIG_INSTALL_NO_USR is not set
CONFIG_LOCALE_SUPPORT=y
CONFIG_UNICODE_SUPPORT=y
# CONFIG_UNICODE_USING_LOCALE is not set
# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
CONFIG_SUBST_WCHAR=63
CONFIG_LAST_SUPPORTED_WCHAR=767
# CONFIG_UNICODE_COMBINING_WCHARS is not set
# CONFIG_UNICODE_WIDE_WCHARS is not set
# CONFIG_UNICODE_BIDI_SUPPORT is not set
# CONFIG_UNICODE_NEUTRAL_TABLE is not set
# CONFIG_UNICODE_PRESERVE_BROKEN is not set
CONFIG_LONG_OPTS=y
CONFIG_FEATURE_DEVPTS=y
# CONFIG_FEATURE_CLEAN_UP is not set
# CONFIG_FEATURE_WTMP is not set
# CONFIG_FEATURE_UTMP is not set
# CONFIG_FEATURE_PIDFILE is not set
CONFIG_FEATURE_SUID=y
# CONFIG_FEATURE_SUID_CONFIG is not set
# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
# CONFIG_SELINUX is not set
CONFIG_FEATURE_PREFER_APPLETS=y
CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
CONFIG_FEATURE_SYSLOG=y
CONFIG_FEATURE_HAVE_RPC=y

#
# Build Options
#
# CONFIG_STATIC is not set
# CONFIG_PIE is not set
# CONFIG_NOMMU is not set
# CONFIG_BUILD_LIBBUSYBOX is not set
# CONFIG_FEATURE_INDIVIDUAL is not set
# CONFIG_FEATURE_SHARED_BUSYBOX is not set
CONFIG_LFS=y
CONFIG_CROSS_COMPILER_PREFIX=""
CONFIG_EXTRA_CFLAGS=""

#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_PESSIMIZE is not set
# CONFIG_WERROR is not set
CONFIG_NO_DEBUG_LIB=y
# CONFIG_DMALLOC is not set
# CONFIG_EFENCE is not set

#
# Installation Options ("make install" behavior)
#
CONFIG_INSTALL_APPLET_SYMLINKS=y
# CONFIG_INSTALL_APPLET_HARDLINKS is not set
# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
# CONFIG_INSTALL_APPLET_DONT is not set
# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
CONFIG_PREFIX="./_install"

#
# Busybox Library Tuning
#
CONFIG_PASSWORD_MINLEN=6
CONFIG_MD5_SIZE_VS_SPEED=2
CONFIG_FEATURE_FAST_TOP=y
# CONFIG_FEATURE_ETC_NETWORKS is not set
CONFIG_FEATURE_USE_TERMIOS=y
CONFIG_FEATURE_EDITING=y
CONFIG_FEATURE_EDITING_MAX_LEN=1024
# CONFIG_FEATURE_EDITING_VI is not set
CONFIG_FEATURE_EDITING_HISTORY=100
CONFIG_FEATURE_EDITING_SAVEHISTORY=y
CONFIG_FEATURE_TAB_COMPLETION=y
# CONFIG_FEATURE_USERNAME_COMPLETION is not set
CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
# CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set
CONFIG_FEATURE_NON_POSIX_CP=y
CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
CONFIG_FEATURE_COPYBUF_KB=4
CONFIG_MONOTONIC_SYSCALL=y
CONFIG_IOCTL_HEX2STR_ERROR=y
# CONFIG_FEATURE_HWIB is not set

#
# Applets
#

#
# Archival Utilities
#
CONFIG_FEATURE_SEAMLESS_XZ=y
CONFIG_FEATURE_SEAMLESS_LZMA=y
CONFIG_FEATURE_SEAMLESS_BZ2=y
CONFIG_FEATURE_SEAMLESS_GZ=y
# CONFIG_FEATURE_SEAMLESS_Z is not set
# CONFIG_AR is not set
# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
# CONFIG_FEATURE_AR_CREATE is not set
CONFIG_BUNZIP2=y
CONFIG_BZIP2=y
CONFIG_CPIO=y
CONFIG_FEATURE_CPIO_O=y
CONFIG_FEATURE_CPIO_P=y
CONFIG_DPKG=y
CONFIG_DPKG_DEB=y
# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
CONFIG_GUNZIP=y
CONFIG_GZIP=y
CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
# CONFIG_LZOP is not set
# CONFIG_LZOP_COMPR_HIGH is not set
# CONFIG_RPM2CPIO is not set
# CONFIG_RPM is not set
CONFIG_TAR=y
CONFIG_FEATURE_TAR_CREATE=y
CONFIG_FEATURE_TAR_AUTODETECT=y
CONFIG_FEATURE_TAR_FROM=y
CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
CONFIG_FEATURE_TAR_LONG_OPTIONS=y
CONFIG_FEATURE_TAR_TO_COMMAND=y
# CONFIG_FEATURE_TAR_UNAME_GNAME is not set
CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y
# CONFIG_FEATURE_TAR_SELINUX is not set
CONFIG_UNCOMPRESS=y
CONFIG_UNLZMA=y
CONFIG_FEATURE_LZMA_FAST=y
CONFIG_LZMA=y
CONFIG_UNXZ=y
CONFIG_XZ=y
CONFIG_UNZIP=y

#
# Coreutils
#
CONFIG_BASENAME=y
CONFIG_CAT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
# CONFIG_FEATURE_DATE_NANO is not set
CONFIG_FEATURE_DATE_COMPAT=y
CONFIG_TEST=y
# CONFIG_FEATURE_TEST_64 is not set
CONFIG_TR=y
CONFIG_FEATURE_TR_CLASSES=y
CONFIG_FEATURE_TR_EQUIV=y
# CONFIG_BASE64 is not set
# CONFIG_CAL is not set
# CONFIG_CATV is not set
# CONFIG_CHGRP is not set
CONFIG_CHMOD=y
CONFIG_CHOWN=y
CONFIG_FEATURE_CHOWN_LONG_OPTIONS=y
CONFIG_CHROOT=y
# CONFIG_CKSUM is not set
# CONFIG_COMM is not set
CONFIG_CP=y
CONFIG_FEATURE_CP_LONG_OPTIONS=y
CONFIG_CUT=y
CONFIG_DD=y
CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
CONFIG_FEATURE_DD_THIRD_STATUS_LINE=y
CONFIG_FEATURE_DD_IBS_OBS=y
CONFIG_DF=y
CONFIG_FEATURE_DF_FANCY=y
CONFIG_DIRNAME=y
CONFIG_DOS2UNIX=y
CONFIG_UNIX2DOS=y
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set
# CONFIG_EXPAND is not set
# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set
CONFIG_EXPR=y
# CONFIG_EXPR_MATH_SUPPORT_64 is not set
CONFIG_FALSE=y
# CONFIG_FOLD is not set
CONFIG_FSYNC=y
CONFIG_HEAD=y
CONFIG_FEATURE_FANCY_HEAD=y
# CONFIG_HOSTID is not set
CONFIG_ID=y
CONFIG_INSTALL=y
# CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set
# CONFIG_LENGTH is not set
CONFIG_LN=y
# CONFIG_LOGNAME is not set
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
CONFIG_FEATURE_LS_RECURSIVE=y
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
CONFIG_FEATURE_LS_COLOR=y
CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
CONFIG_MD5SUM=y
CONFIG_MKDIR=y
# CONFIG_FEATURE_MKDIR_LONG_OPTIONS is not set
CONFIG_MKFIFO=y
CONFIG_MKNOD=y
CONFIG_MV=y
# CONFIG_FEATURE_MV_LONG_OPTIONS is not set
CONFIG_NICE=y
# CONFIG_NOHUP is not set
# CONFIG_OD is not set
CONFIG_PRINTENV=y
CONFIG_PRINTF=y
CONFIG_PWD=y
CONFIG_READLINK=y
CONFIG_FEATURE_READLINK_FOLLOW=y
# CONFIG_REALPATH is not set
CONFIG_RM=y
CONFIG_RMDIR=y
CONFIG_FEATURE_RMDIR_LONG_OPTIONS=y
CONFIG_SEQ=y
# CONFIG_SHA1SUM is not set
# CONFIG_SHA256SUM is not set
# CONFIG_SHA512SUM is not set
CONFIG_SLEEP=y
# CONFIG_FEATURE_FANCY_SLEEP is not set
# CONFIG_FEATURE_FLOAT_SLEEP is not set
CONFIG_SORT=y
CONFIG_FEATURE_SORT_BIG=y
# CONFIG_SPLIT is not set
# CONFIG_FEATURE_SPLIT_FANCY is not set
# CONFIG_STAT is not set
# CONFIG_FEATURE_STAT_FORMAT is not set
CONFIG_STTY=y
# CONFIG_SUM is not set
CONFIG_SYNC=y
CONFIG_TAC=y
CONFIG_TAIL=y
CONFIG_FEATURE_FANCY_TAIL=y
CONFIG_TEE=y
CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_TOUCH=y
CONFIG_TRUE=y
CONFIG_TTY=y
CONFIG_UNAME=y
# CONFIG_UNEXPAND is not set
# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
# CONFIG_UNIQ is not set
CONFIG_USLEEP=y
# CONFIG_UUDECODE is not set
# CONFIG_UUENCODE is not set
CONFIG_WC=y
CONFIG_FEATURE_WC_LARGE=y
# CONFIG_WHO is not set
CONFIG_WHOAMI=y
CONFIG_YES=y

#
# Common options for cp and mv
#
# CONFIG_FEATURE_PRESERVE_HARDLINKS is not set

#
# Common options for ls, more and telnet
#
CONFIG_FEATURE_AUTOWIDTH=y

#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y

#
# Common options for md5sum, sha1sum, sha256sum, sha512sum
#
CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y

#
# Console Utilities
#
# CONFIG_CHVT is not set
# CONFIG_FGCONSOLE is not set
# CONFIG_CLEAR is not set
# CONFIG_DEALLOCVT is not set
# CONFIG_DUMPKMAP is not set
# CONFIG_KBD_MODE is not set
# CONFIG_LOADFONT is not set
# CONFIG_LOADKMAP is not set
# CONFIG_OPENVT is not set
# CONFIG_RESET is not set
# CONFIG_RESIZE is not set
# CONFIG_FEATURE_RESIZE_PRINT is not set
# CONFIG_SETCONSOLE is not set
# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set
# CONFIG_SETFONT is not set
# CONFIG_FEATURE_SETFONT_TEXTUAL_MAP is not set
CONFIG_DEFAULT_SETFONT_DIR=""
# CONFIG_SETKEYCODES is not set
# CONFIG_SETLOGCONS is not set
# CONFIG_SHOWKEY is not set
# CONFIG_FEATURE_LOADFONT_PSF2 is not set
# CONFIG_FEATURE_LOADFONT_RAW is not set

#
# Debian Utilities
#
# CONFIG_MKTEMP is not set
# CONFIG_PIPE_PROGRESS is not set
CONFIG_RUN_PARTS=y
CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
CONFIG_FEATURE_RUN_PARTS_FANCY=y
CONFIG_START_STOP_DAEMON=y
CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
CONFIG_WHICH=y

#
# Editors
#
CONFIG_PATCH=y
CONFIG_AWK=y
# CONFIG_FEATURE_AWK_LIBM is not set
CONFIG_CMP=y
CONFIG_DIFF=y
CONFIG_FEATURE_DIFF_LONG_OPTIONS=y
CONFIG_FEATURE_DIFF_DIR=y
# CONFIG_ED is not set
CONFIG_SED=y
CONFIG_VI=y
CONFIG_FEATURE_VI_MAX_LEN=4096
CONFIG_FEATURE_VI_8BIT=y
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_ASK_TERMINAL=y
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
CONFIG_FEATURE_ALLOW_EXEC=y

#
# Finding Utilities
#
CONFIG_FIND=y
CONFIG_FEATURE_FIND_PRINT0=y
CONFIG_FEATURE_FIND_MTIME=y
CONFIG_FEATURE_FIND_MMIN=y
CONFIG_FEATURE_FIND_PERM=y
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
CONFIG_FEATURE_FIND_MAXDEPTH=y
CONFIG_FEATURE_FIND_NEWER=y
CONFIG_FEATURE_FIND_INUM=y
CONFIG_FEATURE_FIND_EXEC=y
CONFIG_FEATURE_FIND_USER=y
CONFIG_FEATURE_FIND_GROUP=y
CONFIG_FEATURE_FIND_NOT=y
CONFIG_FEATURE_FIND_DEPTH=y
CONFIG_FEATURE_FIND_PAREN=y
CONFIG_FEATURE_FIND_SIZE=y
CONFIG_FEATURE_FIND_PRUNE=y
# CONFIG_FEATURE_FIND_DELETE is not set
CONFIG_FEATURE_FIND_PATH=y
CONFIG_FEATURE_FIND_REGEX=y
# CONFIG_FEATURE_FIND_CONTEXT is not set
CONFIG_FEATURE_FIND_LINKS=y
CONFIG_GREP=y
CONFIG_FEATURE_GREP_EGREP_ALIAS=y
CONFIG_FEATURE_GREP_FGREP_ALIAS=y
CONFIG_FEATURE_GREP_CONTEXT=y
CONFIG_XARGS=y
CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y

#
# Init Utilities
#
# CONFIG_BOOTCHARTD is not set
# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set
# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set
# CONFIG_HALT is not set
# CONFIG_FEATURE_CALL_TELINIT is not set
CONFIG_TELINIT_PATH=""
# CONFIG_INIT is not set
# CONFIG_FEATURE_USE_INITTAB is not set
# CONFIG_FEATURE_KILL_REMOVED is not set
CONFIG_FEATURE_KILL_DELAY=0
# CONFIG_FEATURE_INIT_SCTTY is not set
# CONFIG_FEATURE_INIT_SYSLOG is not set
# CONFIG_FEATURE_EXTRA_QUIET is not set
# CONFIG_FEATURE_INIT_COREDUMPS is not set
# CONFIG_FEATURE_INITRD is not set
CONFIG_INIT_TERMINAL_TYPE=""
# CONFIG_MESG is not set

#
# Login/Password Management Utilities
#
# CONFIG_ADD_SHELL is not set
# CONFIG_REMOVE_SHELL is not set
CONFIG_FEATURE_SHADOWPASSWDS=y
# CONFIG_USE_BB_PWD_GRP is not set
# CONFIG_USE_BB_SHADOW is not set
# CONFIG_USE_BB_CRYPT is not set
# CONFIG_USE_BB_CRYPT_SHA is not set
CONFIG_ADDUSER=y
CONFIG_FEATURE_ADDUSER_LONG_OPTIONS=y
# CONFIG_FEATURE_CHECK_NAMES is not set
CONFIG_FIRST_SYSTEM_ID=100
CONFIG_LAST_SYSTEM_ID=999
CONFIG_ADDGROUP=y
CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y
CONFIG_FEATURE_ADDUSER_TO_GROUP=y
CONFIG_DELUSER=y
CONFIG_DELGROUP=y
CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
CONFIG_GETTY=y
CONFIG_LOGIN=y
# CONFIG_PAM is not set
CONFIG_LOGIN_SCRIPTS=y
CONFIG_FEATURE_NOLOGIN=y
CONFIG_FEATURE_SECURETTY=y
CONFIG_PASSWD=y
CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
# CONFIG_CRYPTPW is not set
# CONFIG_CHPASSWD is not set
CONFIG_SU=y
CONFIG_FEATURE_SU_SYSLOG=y
CONFIG_FEATURE_SU_CHECKS_SHELLS=y
# CONFIG_SULOGIN is not set
# CONFIG_VLOCK is not set

#
# Linux Ext2 FS Progs
#
# CONFIG_CHATTR is not set
# CONFIG_FSCK is not set
# CONFIG_LSATTR is not set
# CONFIG_TUNE2FS is not set

#
# Linux Module Utilities
#
CONFIG_MODINFO=y
# CONFIG_MODPROBE_SMALL is not set
# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
CONFIG_INSMOD=y
CONFIG_RMMOD=y
CONFIG_LSMOD=y
CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
CONFIG_MODPROBE=y
# CONFIG_FEATURE_MODPROBE_BLACKLIST is not set
CONFIG_DEPMOD=y

#
# Options common to multiple modutils
#
# CONFIG_FEATURE_2_4_MODULES is not set
# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
CONFIG_FEATURE_MODUTILS_ALIAS=y
CONFIG_FEATURE_MODUTILS_SYMBOLS=y
CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"

#
# Linux System Utilities
#
# CONFIG_BLOCKDEV is not set
# CONFIG_REV is not set
# CONFIG_ACPID is not set
# CONFIG_FEATURE_ACPID_COMPAT is not set
CONFIG_BLKID=y
CONFIG_DMESG=y
CONFIG_FEATURE_DMESG_PRETTY=y
# CONFIG_FBSET is not set
# CONFIG_FEATURE_FBSET_FANCY is not set
# CONFIG_FEATURE_FBSET_READMODE is not set
# CONFIG_FDFLUSH is not set
# CONFIG_FDFORMAT is not set
CONFIG_FDISK=y
CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
CONFIG_FEATURE_FDISK_WRITABLE=y
# CONFIG_FEATURE_AIX_LABEL is not set
# CONFIG_FEATURE_SGI_LABEL is not set
# CONFIG_FEATURE_SUN_LABEL is not set
# CONFIG_FEATURE_OSF_LABEL is not set
# CONFIG_FEATURE_GPT_LABEL is not set
CONFIG_FEATURE_FDISK_ADVANCED=y
# CONFIG_FINDFS is not set
CONFIG_FLOCK=y
# CONFIG_FREERAMDISK is not set
# CONFIG_FSCK_MINIX is not set
# CONFIG_MKFS_EXT2 is not set
# CONFIG_MKFS_MINIX is not set
# CONFIG_FEATURE_MINIX2 is not set
# CONFIG_MKFS_REISER is not set
# CONFIG_MKFS_VFAT is not set
# CONFIG_GETOPT is not set
# CONFIG_FEATURE_GETOPT_LONG is not set
CONFIG_HEXDUMP=y
# CONFIG_FEATURE_HEXDUMP_REVERSE is not set
# CONFIG_HD is not set
CONFIG_HWCLOCK=y
# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
# CONFIG_IPCRM is not set
# CONFIG_IPCS is not set
# CONFIG_LOSETUP is not set
# CONFIG_LSPCI is not set
CONFIG_LSUSB=y
CONFIG_MDEV=y
CONFIG_FEATURE_MDEV_CONF=y
CONFIG_FEATURE_MDEV_RENAME=y
CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
CONFIG_FEATURE_MDEV_EXEC=y
CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
# CONFIG_MKSWAP is not set
# CONFIG_FEATURE_MKSWAP_UUID is not set
CONFIG_MORE=y
CONFIG_MOUNT=y
CONFIG_FEATURE_MOUNT_FAKE=y
CONFIG_FEATURE_MOUNT_VERBOSE=y
# CONFIG_FEATURE_MOUNT_HELPERS is not set
CONFIG_FEATURE_MOUNT_LABEL=y
CONFIG_FEATURE_MOUNT_NFS=y
CONFIG_FEATURE_MOUNT_CIFS=y
CONFIG_FEATURE_MOUNT_FLAGS=y
CONFIG_FEATURE_MOUNT_FSTAB=y
CONFIG_PIVOT_ROOT=y
# CONFIG_RDATE is not set
# CONFIG_RDEV is not set
# CONFIG_READPROFILE is not set
# CONFIG_RTCWAKE is not set
# CONFIG_SCRIPT is not set
# CONFIG_SCRIPTREPLAY is not set
# CONFIG_SETARCH is not set
# CONFIG_SWAPONOFF is not set
# CONFIG_FEATURE_SWAPON_PRI is not set
CONFIG_SWITCH_ROOT=y
CONFIG_UMOUNT=y
CONFIG_FEATURE_UMOUNT_ALL=y

#
# Common options for mount/umount
#
CONFIG_FEATURE_MOUNT_LOOP=y
CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
# CONFIG_FEATURE_MTAB_SUPPORT is not set
CONFIG_VOLUMEID=y

#
# Filesystem/Volume identification
#
CONFIG_FEATURE_VOLUMEID_EXT=y
# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
# CONFIG_FEATURE_VOLUMEID_REISERFS is not set
CONFIG_FEATURE_VOLUMEID_FAT=y
# CONFIG_FEATURE_VOLUMEID_HFS is not set
# CONFIG_FEATURE_VOLUMEID_JFS is not set
# CONFIG_FEATURE_VOLUMEID_XFS is not set
CONFIG_FEATURE_VOLUMEID_NTFS=y
CONFIG_FEATURE_VOLUMEID_ISO9660=y
# CONFIG_FEATURE_VOLUMEID_UDF is not set
# CONFIG_FEATURE_VOLUMEID_LUKS is not set
CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
CONFIG_FEATURE_VOLUMEID_CRAMFS=y
# CONFIG_FEATURE_VOLUMEID_ROMFS is not set
CONFIG_FEATURE_VOLUMEID_SYSV=y
# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set

#
# Miscellaneous Utilities
#
# CONFIG_CONSPY is not set
# CONFIG_NANDWRITE is not set
# CONFIG_NANDDUMP is not set
# CONFIG_UBIATTACH is not set
# CONFIG_UBIDETACH is not set
# CONFIG_ADJTIMEX is not set
# CONFIG_BBCONFIG is not set
# CONFIG_FEATURE_COMPRESS_BBCONFIG is not set
# CONFIG_BEEP is not set
CONFIG_FEATURE_BEEP_FREQ=0
CONFIG_FEATURE_BEEP_LENGTH_MS=0
# CONFIG_CHAT is not set
# CONFIG_FEATURE_CHAT_NOFAIL is not set
# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set
# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
# CONFIG_CHRT is not set
CONFIG_CROND=y
CONFIG_FEATURE_CROND_D=y
# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
CONFIG_FEATURE_CROND_DIR="/etc"
CONFIG_CRONTAB=y
# CONFIG_DC is not set
# CONFIG_FEATURE_DC_LIBM is not set
# CONFIG_DEVFSD is not set
# CONFIG_DEVFSD_MODLOAD is not set
# CONFIG_DEVFSD_FG_NP is not set
# CONFIG_DEVFSD_VERBOSE is not set
# CONFIG_FEATURE_DEVFS is not set
# CONFIG_DEVMEM is not set
# CONFIG_EJECT is not set
# CONFIG_FEATURE_EJECT_SCSI is not set
# CONFIG_FBSPLASH is not set
# CONFIG_FLASHCP is not set
# CONFIG_FLASH_LOCK is not set
# CONFIG_FLASH_UNLOCK is not set
# CONFIG_FLASH_ERASEALL is not set
# CONFIG_IONICE is not set
# CONFIG_INOTIFYD is not set
# CONFIG_LAST is not set
# CONFIG_FEATURE_LAST_SMALL is not set
# CONFIG_FEATURE_LAST_FANCY is not set
CONFIG_LESS=y
CONFIG_FEATURE_LESS_MAXLINES=9999999
CONFIG_FEATURE_LESS_BRACKETS=y
CONFIG_FEATURE_LESS_FLAGS=y
CONFIG_FEATURE_LESS_MARKS=y
CONFIG_FEATURE_LESS_REGEXP=y
CONFIG_FEATURE_LESS_WINCH=y
CONFIG_FEATURE_LESS_DASHCMD=y
CONFIG_FEATURE_LESS_LINENUMS=y
# CONFIG_HDPARM is not set
# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set
# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
# CONFIG_MAKEDEVS is not set
# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
# CONFIG_FEATURE_MAKEDEVS_TABLE is not set
# CONFIG_MAN is not set
CONFIG_MICROCOM=y
CONFIG_MOUNTPOINT=y
# CONFIG_MT is not set
# CONFIG_RAIDAUTORUN is not set
# CONFIG_READAHEAD is not set
# CONFIG_RFKILL is not set
# CONFIG_RUNLEVEL is not set
# CONFIG_RX is not set
# CONFIG_SETSID is not set
# CONFIG_STRINGS is not set
# CONFIG_TASKSET is not set
# CONFIG_FEATURE_TASKSET_FANCY is not set
CONFIG_TIME=y
CONFIG_TIMEOUT=y
# CONFIG_TTYSIZE is not set
# CONFIG_VOLNAME is not set
CONFIG_WALL=y
# CONFIG_WATCHDOG is not set

#
# Networking Utilities
#
# CONFIG_NBDCLIENT is not set
CONFIG_NC=y
CONFIG_NC_SERVER=y
CONFIG_NC_EXTRA=y
# CONFIG_NC_110_COMPAT is not set
CONFIG_FEATURE_IPV6=y
# CONFIG_FEATURE_UNIX_LOCAL is not set
CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
CONFIG_ARP=y
CONFIG_ARPING=y
# CONFIG_BRCTL is not set
# CONFIG_FEATURE_BRCTL_FANCY is not set
# CONFIG_FEATURE_BRCTL_SHOW is not set
# CONFIG_DNSD is not set
# CONFIG_ETHER_WAKE is not set
# CONFIG_FAKEIDENTD is not set
# CONFIG_FTPD is not set
# CONFIG_FEATURE_FTP_WRITE is not set
# CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST is not set
CONFIG_FTPGET=y
CONFIG_FTPPUT=y
# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
CONFIG_HOSTNAME=y
CONFIG_HTTPD=y
CONFIG_FEATURE_HTTPD_RANGES=y
CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
CONFIG_FEATURE_HTTPD_SETUID=y
CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
CONFIG_FEATURE_HTTPD_AUTH_MD5=y
CONFIG_FEATURE_HTTPD_CGI=y
CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
CONFIG_FEATURE_HTTPD_PROXY=y
CONFIG_FEATURE_HTTPD_GZIP=y
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
# CONFIG_FEATURE_IFCONFIG_SLIP is not set
# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
CONFIG_FEATURE_IFCONFIG_HW=y
CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
# CONFIG_IFENSLAVE is not set
CONFIG_IFPLUGD=y
# CONFIG_IFUPDOWN is not set
CONFIG_IFUPDOWN_IFSTATE_PATH=""
# CONFIG_FEATURE_IFUPDOWN_IP is not set
# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
# CONFIG_FEATURE_IFUPDOWN_IPV4 is not set
# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
CONFIG_INETD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
CONFIG_FEATURE_INETD_RPC=y
CONFIG_IP=y
CONFIG_FEATURE_IP_ADDRESS=y
CONFIG_FEATURE_IP_LINK=y
CONFIG_FEATURE_IP_ROUTE=y
CONFIG_FEATURE_IP_TUNNEL=y
CONFIG_FEATURE_IP_RULE=y
CONFIG_FEATURE_IP_SHORT_FORMS=y
# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
CONFIG_IPADDR=y
CONFIG_IPLINK=y
CONFIG_IPROUTE=y
CONFIG_IPTUNNEL=y
CONFIG_IPRULE=y
# CONFIG_IPCALC is not set
# CONFIG_FEATURE_IPCALC_FANCY is not set
# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
# CONFIG_NAMEIF is not set
# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
CONFIG_NETSTAT=y
CONFIG_FEATURE_NETSTAT_WIDE=y
CONFIG_FEATURE_NETSTAT_PRG=y
CONFIG_NSLOOKUP=y
CONFIG_NTPD=y
CONFIG_FEATURE_NTPD_SERVER=y
CONFIG_PING=y
CONFIG_PING6=y
CONFIG_FEATURE_FANCY_PING=y
# CONFIG_PSCAN is not set
CONFIG_ROUTE=y
CONFIG_SLATTACH=y
# CONFIG_TCPSVD is not set
# CONFIG_TELNET is not set
# CONFIG_FEATURE_TELNET_TTYPE is not set
# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
# CONFIG_TELNETD is not set
# CONFIG_FEATURE_TELNETD_STANDALONE is not set
# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
CONFIG_TFTP=y
# CONFIG_TFTPD is not set

#
# Common options for tftp/tftpd
#
CONFIG_FEATURE_TFTP_GET=y
CONFIG_FEATURE_TFTP_PUT=y
# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
# CONFIG_FEATURE_TFTP_PROGRESS_BAR is not set
# CONFIG_TFTP_DEBUG is not set
# CONFIG_TRACEROUTE is not set
# CONFIG_TRACEROUTE6 is not set
# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
# CONFIG_TUNCTL is not set
# CONFIG_FEATURE_TUNCTL_UG is not set
CONFIG_UDHCPD=y
CONFIG_DHCPRELAY=y
CONFIG_DUMPLEASES=y
CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY=y
CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases"
CONFIG_UDHCPC=y
CONFIG_FEATURE_UDHCPC_ARPING=y
# CONFIG_FEATURE_UDHCP_PORT is not set
CONFIG_UDHCP_DEBUG=9
CONFIG_FEATURE_UDHCP_RFC3397=y
CONFIG_UDHCPC_DEFAULT_SCRIPT="/etc/udhcpc.sh"
CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
# CONFIG_UDPSVD is not set
# CONFIG_VCONFIG is not set
CONFIG_WGET=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_AUTHENTICATION=y
CONFIG_FEATURE_WGET_LONG_OPTIONS=y
CONFIG_FEATURE_WGET_TIMEOUT=y
# CONFIG_ZCIP is not set

#
# Print Utilities
#
# CONFIG_LPD is not set
# CONFIG_LPR is not set
# CONFIG_LPQ is not set

#
# Mail Utilities
#
# CONFIG_MAKEMIME is not set
CONFIG_FEATURE_MIME_CHARSET=""
# CONFIG_POPMAILDIR is not set
# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set
# CONFIG_REFORMIME is not set
# CONFIG_FEATURE_REFORMIME_COMPAT is not set
# CONFIG_SENDMAIL is not set

#
# Process Utilities
#
CONFIG_IOSTAT=y
# CONFIG_MPSTAT is not set
CONFIG_PMAP=y
# CONFIG_POWERTOP is not set
# CONFIG_SMEMCAP is not set
CONFIG_FREE=y
CONFIG_FUSER=y
CONFIG_KILL=y
CONFIG_KILLALL=y
CONFIG_KILLALL5=y
CONFIG_NMETER=y
CONFIG_PGREP=y
CONFIG_PIDOF=y
CONFIG_FEATURE_PIDOF_SINGLE=y
CONFIG_FEATURE_PIDOF_OMIT=y
CONFIG_PKILL=y
CONFIG_PS=y
CONFIG_FEATURE_PS_WIDE=y
# CONFIG_FEATURE_PS_TIME is not set
# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set
# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
CONFIG_RENICE=y
CONFIG_BB_SYSCTL=y
CONFIG_TOP=y
CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
CONFIG_FEATURE_TOP_SMP_CPU=y
CONFIG_FEATURE_TOP_DECIMALS=y
CONFIG_FEATURE_TOP_SMP_PROCESS=y
CONFIG_FEATURE_TOPMEM=y
CONFIG_FEATURE_SHOW_THREADS=y
CONFIG_UPTIME=y
CONFIG_WATCH=y

#
# Runit Utilities
#
# CONFIG_RUNSV is not set
# CONFIG_RUNSVDIR is not set
# CONFIG_FEATURE_RUNSVDIR_LOG is not set
# CONFIG_SV is not set
CONFIG_SV_DEFAULT_SERVICE_DIR=""
# CONFIG_SVLOGD is not set
# CONFIG_CHPST is not set
# CONFIG_SETUIDGID is not set
# CONFIG_ENVUIDGID is not set
# CONFIG_ENVDIR is not set
# CONFIG_SOFTLIMIT is not set
# CONFIG_CHCON is not set
# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
# CONFIG_GETENFORCE is not set
# CONFIG_GETSEBOOL is not set
# CONFIG_LOAD_POLICY is not set
# CONFIG_MATCHPATHCON is not set
# CONFIG_RESTORECON is not set
# CONFIG_RUNCON is not set
# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
# CONFIG_SELINUXENABLED is not set
# CONFIG_SETENFORCE is not set
# CONFIG_SETFILES is not set
# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
# CONFIG_SETSEBOOL is not set
# CONFIG_SESTATUS is not set

#
# Shells
#
CONFIG_ASH=y
CONFIG_ASH_BASH_COMPAT=y
CONFIG_ASH_JOB_CONTROL=y
CONFIG_ASH_ALIAS=y
CONFIG_ASH_GETOPTS=y
CONFIG_ASH_BUILTIN_ECHO=y
CONFIG_ASH_BUILTIN_PRINTF=y
CONFIG_ASH_BUILTIN_TEST=y
CONFIG_ASH_CMDCMD=y
CONFIG_ASH_MAIL=y
CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
CONFIG_ASH_RANDOM_SUPPORT=y
CONFIG_ASH_EXPAND_PRMT=y
# CONFIG_CTTYHACK is not set
# CONFIG_HUSH is not set
# CONFIG_HUSH_BASH_COMPAT is not set
# CONFIG_HUSH_BRACE_EXPANSION is not set
# CONFIG_HUSH_HELP is not set
# CONFIG_HUSH_INTERACTIVE is not set
# CONFIG_HUSH_SAVEHISTORY is not set
# CONFIG_HUSH_JOB is not set
# CONFIG_HUSH_TICK is not set
# CONFIG_HUSH_IF is not set
# CONFIG_HUSH_LOOPS is not set
# CONFIG_HUSH_CASE is not set
# CONFIG_HUSH_FUNCTIONS is not set
# CONFIG_HUSH_LOCAL is not set
# CONFIG_HUSH_RANDOM_SUPPORT is not set
# CONFIG_HUSH_EXPORT_N is not set
# CONFIG_HUSH_MODE_X is not set
# CONFIG_MSH is not set
CONFIG_FEATURE_SH_IS_ASH=y
# CONFIG_FEATURE_SH_IS_HUSH is not set
# CONFIG_FEATURE_SH_IS_NONE is not set
CONFIG_FEATURE_BASH_IS_ASH=y
# CONFIG_FEATURE_BASH_IS_HUSH is not set
# CONFIG_FEATURE_BASH_IS_NONE is not set
CONFIG_SH_MATH_SUPPORT=y
# CONFIG_SH_MATH_SUPPORT_64 is not set
CONFIG_FEATURE_SH_EXTRA_QUIET=y
# CONFIG_FEATURE_SH_STANDALONE is not set
# CONFIG_FEATURE_SH_NOFORK is not set

#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
CONFIG_FEATURE_SYSLOGD_DUP=y
CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
CONFIG_FEATURE_IPC_SYSLOG=y
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
CONFIG_LOGREAD=y
CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
CONFIG_KLOGD=y
CONFIG_FEATURE_KLOGD_KLOGCTL=y
CONFIG_LOGGER=y
</file>
++++
====== SDK ======
The SDK provided by Kerlink is able to generate a part of the firmware for Long Range IoT Station :
  * kernel,
  * rootfs.

<note important>The new firmware **wirmaV2_wirgrid_v2.x** is mandatory with the "27dBm LoRa IoT Stations"\\
The Semtech LoRa HAL has to be rebuilt in version v2.0.0 or upper, with the compilation flag **CFG_BRD= kerlink_868_27dbm** \\
Note: kerlink_868_27dbm = Kerlink LoRa 868MHz gateway with 27dBm capability
</note>

===== Installation: firmware v2.x=====
The SDK is provided as an archive : [[ftp://wiki-ftp-wirgrid:CmhKQtm1IqxOTgQ0RTE8@ftp.kerlinkm2mtechnologies.fr/_kerlink/wirgrid_buildroot_v2.1.tar.gz|wirgrid_buildroot_v2.1.tar.gz]].
You can also download the kernel sources [[ftp://wiki-ftp-wirgrid:CmhKQtm1IqxOTgQ0RTE8@ftp.kerlinkm2mtechnologies.fr/_kerlink/linux-4281f2b.tar.xz|linux-4281f2b.tar.xz]].

To install it:
<code shell>
 $ cd ~/workdir
 $ tar xzf ~/wirgrid_buildroot_v2.1.tar.gz
 $ cd buildroot/
 $ mkdir dl
 $ cp ~/linux-4281f2b.tar.xz ./dl/linux-4281f2b.tar.xz
 $ cd dl
 $ unxz linux-4281f2b.tar.xz
 $ gzip linux-4281f2b.tar
</code>

Before being able to compile, several tools must be installed:
<code shell>
 $ sudo apt-get install u-boot-tools lzma zlib1g-dev bison flex yodl texinfo libncurses5-dev
</code>
<note> A number of packages are installed also in mode “host” in the toolchain.\\
According to the distribution used, compilation might fail.\\
 For instance, if you use Ubuntu, change default Shell to link on Bash: 
<code shell>
 $ sudo rm -f /bin/sh
 $ sudo ln -s /bin/bash /bin/sh
</code>
</note>


===== Installation: firmware v1.x=====
The SDK is provided as an archive : [[ftp://wiki-ftp-wirgrid:CmhKQtm1IqxOTgQ0RTE8@ftp.kerlinkm2mtechnologies.fr/_kerlink/wirgrid_buildroot_v1.0.tar.gz|wirgrid_buildroot_v1.0.tar.gz]].
You can also download the kernel sources [[ftp://wiki-ftp-wirgrid:CmhKQtm1IqxOTgQ0RTE8@ftp.kerlinkm2mtechnologies.fr/_kerlink/linux-wirgrid-1.0.tar.gz|linux-wirgrid-1.0.tar.gz]] .

To install it :
<code shell>
 $ cd ~/workdir
 $ tar xzf ~/wirgrid_buildroot_v1.0.tar.gz
 $ cd buildroot/
 $ mkdir dl
 $ cp ~/linux-wirgrid-1.0.tar.gz ./dl/linux-wirgrid-1.0.tar.gz
</code>

Before being able to compile, several tools must be installed:
<code shell>
 $ sudo apt-get install u-boot-tools lzma zlib1g-dev bison flex yodl texinfo libncurses5-dev
</code>
<note> A number of packages are installed also in mode “host” in the toolchain.\\/
According to the distribution used, compilation might fail.\\
 For instance, if you use Ubuntu, change default Shell to link on Bash: 
<code shell>
 $ sudo rm -f /bin/sh
 $ sudo ln -s /bin/bash /bin/sh
</code>
</note>


===== Basic use =====
==== Rootfs & Kernel generation ====
<code bash>
cd ~/workdir/buildroot
make clean
make wirgrid_defconfig
make
</code>
==== Images description ====
The generated firmware is in the directory //output/images/// of the workdir. Inside :
<code sh>
psa@psa-Vostro-260 ~/workdir/buildroot $ ll output/images
total 26M
drwxr-xr-x 2 psa psa 4,0K févr. 24 12:14 .
drwxr-xr-x 8 psa psa 4,0K févr. 24 12:05 ..
-rw-r--r-- 1 psa psa  16M févr. 24 12:14 rootfs.tar
-rw-r--r-- 1 psa psa 7,1M févr. 24 12:14 rootfs.tar.gz
-rw-r--r-- 1 psa psa 2,4M févr. 24 12:14 uImage
</code>
  * **rootfs.tar** archive of the root filesystem ;
  * **rootfs.tar.gz** compressed archive of the root filesystem ;
  * **uImage** kernel binary ;

==== Modify Rootfs configuration ====
The default configuration used by Buildroot is //wirgrid_defconfig//. This file is saved in ~/workdir/buildroot/configs/. To modify it :
<code sh>
 $ cd ~/workdir/buildroot
 $ make menuconfig
</code>
The new configuration will be saved in //~/workdir/buildroot/.config//.
=== Update default Rootfs configuration ===
In order to update the default configuration :
<code sh>
 $ cd ~/workdir/buildroot
 $ make savedefconfig
 $ cp defconfig configs/wirgrid_defconfig
</code>

==== Update kernel configuration ====
Configuration and compilation are managed by Buildroot. 
<code sh>
 $ cd ~/workdir/buildroot
 $ make linux-menuconfig
</code>
The new configuration will be saved in //~/workdir/buildroot/output/build/linux-wirgrid-1.0/.config//.
=== Update default kernel configuration ===
In order to use your own kernel configuration by default, you must update buildroot configuration.
In kernel configuration you must change "using a defconfig" by "using a custom config file" and add you configuration file path.


==== TFTP boot ====
It is possible to boot the LoRa station on a kernel image with a tftp server. Set up a tftp server with the kernel image you want to use and follow these steps:

  * Enter in the u-boot shell and press “k” keyboard key several time at early boot time
  * Type **watchdog disable** in the u-boot shell
<code shell>
  Product: WirmaV2 lora V
  WARNING: Machine type unknown, set default wirmaV2 Module
  Autoboot in 1 seconds, enter Password:
  KLK-Uboot> kkkkkkkkkkkkkkkkkkkkkkkk
  Unknown command 'kkkkkkkkkkkkkkkkkkkkkkkk' - try 'help'
  KLK-Uboot> watchdog disable
  Watchdog disabled
</code>
  * Type **printenv** and check the field ipaddr and serverip. Your IP address is in the field ipaddr and the tftp server IP in the field serverip.
<code shell>
KLK-Uboot> printenv
ipaddr=192.168.4.232
serverip=192.168.4.104
</code>
  * Download the kernel image with tftp command : **tftp 0x80010000 path_to_your_image**
<code shell>
KLK-Uboot> tftp 0x80010000 path_to_your_image/uImage
        HW MAC address:  02:4B:08:05:03:A4
ENET:auto-negotiation complete
ENET:Link status up
ENET:FULL DUPLEX
ENET:100MBase
TFTP from server 192.168.4.104; our IP address is 192.168.4.232
Filename 'path_to_your_image/uImage'.
Load address: 0x80010000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##################################
done
Bytes transferred = 2166984 (2110c8 hex)
</code>
  * Change bootargs value and save
<code shell>
KLK-Uboot> setenv bootargs ${bootargs} root=/dev/mtdblock5 rootfstype=yaffs2 rw init=/sbin/init panic=1
KLK-Uboot> saveenv
</code>
  * Boot image from memory
<code shell>
KLK-Uboot> bootm 0x80010000
</code>

===== Advanced use =====
The SDK is built around Buildroot. To obtain more help about Buildroot you can read its manual : [[http://buildroot.uclibc.org/downloads/manual/manual.html]].

You can also open the Makefile in the root of the SDK in order to understand how are built and generated packages with Buildroot.

====== Toolchain ======
Kerlink provides the [[ftp://wiki-ftp-wirgrid:CmhKQtm1IqxOTgQ0RTE8@ftp.kerlinkm2mtechnologies.fr/_kerlink/arm-2011.03-wirma2-r59.tar.xz|arm-2011.03-wirma2-r59.tar.xz]] package which contains the cross-toolchain, libraries and headers necessary to the compilation of an application. This toolchain is extracted from Buildroot.
===== Install =====
<code sh>
mkdir /opt/toolchains
cd /opt/toolchains
tar xJf arm-2011.03-wirma2-r59.tar.xz
</code>

You must add the toolchain to your environnement PATH:
<code sh>
PATH=$PATH:/opt/toolchains/arm-2011.03-wirma2/bin
</code>

In order to run in 64bits hardware, you must install ia32-libs, or lib32z1 :
<code sh>
sudo apt-get install ia32-libs

if the package is deprecated use:
sudo apt-get install lib32z1 
</code>
Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools
