Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== FAQ - Gateway Software Installation for WMC >= 3.2 ====== 
  
//This procedure is the First Install procedure. \\
It must be performed from scratch (only FW is available - the gateway is not connected to the WMC)//

\\ 

===== How to install 4.x embedded software for my gateway? =====

Follow this procedure or use the magic link:

  - Ask for a new OpenVPN packages to the [[support@kerlink.fr|support@kerlink.fr]]  team and give the serial number of your gateway
  - Install the gateway software by following the procedure described here: [[wiki:wiki3:gateway_sw_4.3.3|Wirnet i-series software release 4.3.3]]
  - Install the OpenVPN packages on your gateway (as any other package, see the link for software upgrade below)
  - Enable the embedded WMC application ([[wiki:wiki3:gateway_sw_4.3.3#software_update_over_ethernet|click here to see how to use klk_apps_config]])
  - Wait a short time and check that the gateway is connected to the WMC 3.x

The software update procedure is defined above: \\ 

**Wirnet Product Line (iBTS, iFemtoCell, iStation)**:[[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates]] \\

The magic link can also be used for a first install process. Follow this [[wiki:wiki3:magic_link|link]] to perform this.


===== How to install 3.x embedded software for my gateway? (before FW 4.3.3) =====

Follow this procedure or use the magic link:

  - Ask for a new OpenVPN packages to the [[support@kerlink.fr|support@kerlink.fr]]  team and give the serial number of your gateway
  - Install the OpenVPN packages on your gateway (as any other package, see the link for software upgrade below)
  - Install the gateway software by following the procedure described here: [[.faq_gw_upgrade_3.2|FAQ - Gateway Upgrade for WMC 3.x]]
  - Wait a short time and check that the gateway is connected to the WMC 3.x

The software update procedure is defined above: \\ 

**Wirnet Product Line (iBTS, iFemtoCell, iStation)**:[[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates]] \\

The magic link can also be used for a first install process. Follow this [[wiki:wiki3:magic_link|link]] to perform this.
Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools
