Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== FAQ - Gateway Software Upgrade for WMC 3.0 ====== 
  
//The gateway is considered connected to the WMC using embedded software 2.3.x or 3.0.//\\
\\  

The Magic link can also be used to upgrade your KerOS products (Wirnet iBTS and Wirnet iFemtoCell. Follow this [[wiki:wiki3:magic_link|Magic Link]] to perform this.

<note important>**Do not use the magic link to update a Wirnet Station which has a 2.3.3 embedded software.** \\
You may loose the WMC connection ! Follow the procedure described above depending of your backhaul configuration (DHCP, static IP, cellular)</note>
\\
\\
===== How to upgrade my gateway that is DHCP assigned with 3.0 embedded software? =====

Download the last megapackage 3.0 to update your gateway from the  [[.gateway_sw_3.0|Resource page]]\\ 

For a software upgrade on kerOS products (Wirnet iBTS and Wirnet iFemtocell) via a local access (SSH, USB), the megapackage need to be deflated twice in order to get ipk packages.\\
Then apply the software update procedure defined above: \\

**Wirnet Station**: [[http://wikikerlink.fr/lora-station/doku.php?id=wiki:updates]] \\ 
**Wirnet iBTS**: [[http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:sw_updates]] \\ 
**Wirnet iFemtoCell**: [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:software_updates]]

If you proceed software upgrade via the dashboard (Drag and Drop or Workflow feature), you don't need to deflate the megapackage.

\\  
===== How to upgrade my gateway that is static-IP assigned with 3.0 embedded software? =====
 \\
**For Wirnet Station:**
  - Download **SNMP** and **BSCC** packages from the [[.gateway_sw_3.0|Resource page]]  of the current Wiki  and upgrade your GW with these packages by using the Software Update Drag and Drop feature.
  - Once connected to the WMC, check your network config from the WMC dashboard (Management>Configurations>Backhaul). Network config should be up to date (no DHCP defined).
  - Download the megapackage from the [[.gateway_sw_3.0|Resource page]] using Software Update Drag and Drop feature to update HAL and SPF components. 
\\
For KerOs Products (**Wirnet iBTS, Wirnet iFemtoCell**): \\

Download the last megapackage 3.0 to update your gateway from the [[.gateway_sw_3.0|Resource page]] \\ \\ 


\\
===== How to upgrade my gateway that is GSM-configured with 3.0 embedded software? =====

\\
**For Wirnet Station:**
  - Download **SNMP** and **BSCC** packages from the [[.gateway_sw_3.0|Resource page]]  of the current Wiki  and upgrade your GW with these packages by using the Software Update Drag and Drop feature.
  - Once connected to the WMC, check your network config from the WMC dashboard (Management>Configurations>Backhaul). Network config should be up to date (APN should be correctly defined).
  - Download the megapackage from the [[.gateway_sw_3.0|Resource page]] using Software Update Drag and Drop feature to update HAL and SPF components. 
\\
For KerOs Products (**Wirnet iBTS, Wirnet iFemtoCell**): \\ 

Download the last megapackage 3.0 to update your gateway from the [[.gateway_sw_3.0|Resource page]] \\ 

\\
\\
===== How to upgrade my gateway that is WIFI configured with 3.0 embedded software? =====

Download the last megapackage 3.0 to update your gateway from the [[.gateway_sw_3.0|Resource page]] \\ 

The megapackage need to be deflated twice in order to get ipk packages if you do a local installation of packages.

Then apply the software update procedure defined above: \\


**Wirnet iFemtoCell**: [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:software_updates]]


\\
Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools
