Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== v3.3 Gateway Software Release ======

<note important> This version is designed to connect Kerlink products except the Wirnet Station to **WMC server 3.2 or greater** \\
They are not intended to be used with WMC servers 2.3, 3.0 or 3.1.</note>

There are 3 ways to do that:
  * by using [[.magic_link|magic link]]
  * by using an [[.gateway_sw_3.3#USB_usage|USB stick]]
  * by using [[.gateway_sw_3.3#Ethernet_usage|Ethernet connection (SSH)]]


===== Download =====

^  Product                                                ^  Package                                                 ^   md5sum      ^                         
|  **All products except Wirnet Station**                   |   {{ :wiki3:WMC_embedded_keros_v3.3.5.tar.gz |}}         |  0696a403d25d2a1739c263cea0ecc875 |


The content of this package is listed below:

^Component ^Version ^	
| **keros**	| 4.2.2    |
| **bscc**	| 3.3.3    |
| **lorasnmp**  | 3.3.2    |
| **lorad**	| 1.2.2-2  |
| **lorafwd**	| 1.1.2-1  |
| **kerlink-openvpn-wmc-config** | 4.3 |

\\
===== USB usage =====

This procedure used for automatic deployment can be used to **UPGRADE from a KerOS 4.x system** on a **single** or a **group of gateways**. \\

To update/connect your system from a KerOS 4.x system, use the following software:

^description                 ^file        ^md5sum      ^
|**USB stick ** | {{ wiki3:auto_deploy_3.3.5_keros_usb_stick.tar.gz | AUTO_DEPLOY_3.3.5_KEROS_USB_STICK.tar.gz }} |  b1a144d2cf9ec866b4c6fd97f44a2c7c  |

**The .tar.gz file provided above is "ready-to-use"**. 
You only need to copy your OpenVPN packages on the USB stick: your OpenVPN secrets files in //vpn_packages// directory and your OpenVPN config file in the //COMMON// directory to be able to connect properly to your WMC server.


\\
To update your gateway, apply the following procedure:

  - Unpack the tarball file ('.tar.gz') to get files (README.txt, usb.autorun, ...) and put all files on your USB stick in the root directory
  - Request your VPN package(s) to the Kerlink Support team: [[support@kerlink.fr]] (optional: in case of a First Install or Migration)
  - Put your VPN config package in the //COMMON// directory to connect to YOUR WMC server (optional: in case of a First Install or Migration)
  - Put your VPN secrets packages of your KerOS products in the //vpn_packages// directory (optional: in case of a First Install)
  - Plug the USB stick in the gateway USB slot (device must be powered on)
  - Wait the end of the update (Status led flashes quickly)


<note important> **IT IS VERY IMPORTANT TO WAIT FOR THE LED FLASHING TO NOT BRICK THE GATEWAY** </note>

Refer to the specific wiki to get more details about software update over USB: \\ 
** [[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_update_over_usb|Wirnet Product Line (iBTS, iFemtocell, iStation)]] ** \\



<code>
The USB tree should contains the following files/folders:

/
├── COMMON                                   # Common packages folder
│   ├── keros_***_klkgw.ipk                  # Keros firmware package 
│   ├── bscc_***_klkgw.ipk                   # WMC BSCC package 
│   ├── lorasnmp_***_klkgw.ipk               # WMC SNMP package 
│   ├── lorad_***_klkgw.ipk                  # HAL daemon package
│   ├── lorafwd_***_klkgw.ipk                # Packet Forwarder package
│   └── kerlink-openvpn-wmc-config_***.ipk   # Defaut OpenVPN configuration (to be replaced by provided packages in case of First install or migration)
├── README.txt                               # This file
├── usb.autorun                              # executed by KerOs products when plugging the USB stick
├── usbkey.txt                               # USB key protection: must contain the device passwords (all of them)
└── vpn_packages                                          # WMC OpenVPN packages folder
    ├── openvpn_***_wmcbeta.wanesy.com_***.ipk            # OpenVPN package for one KerOS product to connect to a WMC platform (here wmcbeta)
    ├── openvpn_***_wmcbeta.wanesy.com_***.ipk            # another package for one KerOS product to connect to a WMC platform (here wmcbeta)
    ├── openvpn_***_wmcbeta.wanesy.com_***.ipk            # ...
    ├── openvpn_***_wmcbeta.wanesy.com_***.ipk            # ...
    ├── openvpn_***_wmcbeta.wanesy.com_***.ipk            # ...
    ├── openvpn_***_wmcbeta.wanesy.com_***.ipk            # ...
    └── openvpn_***_wmcbeta.wanesy.com_***.ipk            # ...

</code>
\\
\\
\\


===== Ethernet usage =====

This procedure can be used to **UPGRADE from a KerOS 4.x system** on a **single** gateway. \\

To update your gateway, apply the following procedure:
  - Request your VPN package(s) to the Kerlink Support team: [[support@kerlink.fr]] (optional: in case of a First Install or Migration)
  - Transfer package(s) in this directory: <code bash>
# From a computer:
scp WMC_embedded_keros_v3.3.5.tar.gz openvpn-*.ipk root@<ip_address>:/user/.updates/
</code>
  - Deflate archive and ensure file is correctly written: <code bash># On the gateway:
cd /user/.updates
tar -xzf *.tar.gz
rm -f WMC*.tar.gz
sync </code>
  - Trigger Update for next reboot: <code bash>kerosd -u </code>
  - Restart: <code bash>reboot</code>


Refer to [[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_update_over_network|software update procedure]] for further details.


===== Changelog =====

Here is listed main changelog from v3.2 software release:

  * iFemtocell-Evolution gateway support
  * Backhaul configuration improvement
  * Spectral scan improvement on iStation and iFemtocell-Evolution
  * Power management improvement
  * Allow Internet access while connected to WMC

 
Please note that, if gateways use public IP, it also makes your gateway accessible from Internet on open SSH or HTTP ports (protected by passwords). Kerlink so recommends to change passwords as described in [[https://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:systeme_mana:connection_credentials|Connection, login and credentials]]

===== Warranty =====

<note important>
**CAUTION ABOUT WARRANTY:** \\
**Kerlink is not responsible for damages resulting from failure to follow these instructions relating to the Kerlink Product’s use.**
</note>
Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools
