====== Wirnet i-series software release 5.5.4 ======
**This software release is designed to connect Wirnet i-series products** \\
(Wirnet iStation, Wirnet iBTS, Wirnet iFemtoCell and Wirnet iFemtoCell-evolution) **to the WMC server 3.2 or greater** \\
**It is not intended to be used with Wirnet Stations**. For this latter, please use the following software: [[https://wikikerlink.fr/wanesy-ran/doku.php?id=wiki.wiki3:gateway_sw_wista_3.1.8|v3.1.8]]
\\
===== Download =====
^ Package ^ md5sum ^
| {{ :wiki3:custom-liveburner_5.5.4_klkgw-signed.ipk | custom-liveburner_5.5.4_klkgw-signed.ipk}} | 4b1ee3722561e705dbc9228889e70ff6 |
Do not use this package to upgrade from a KerOS 3.x. \\
For this latter, read [[ wiki:wiki3:gateway_sw_4.3.3#software_update_over_the_network_from_keros_3x|]]
The content of this package is listed below:
^Component ^Version ^
| **keros** | 5.5.4 |
| **bscc** | included in KerOS 5.5.4 firmware |
| **lorasnmp** | included in KerOS 5.5.4 firmware |
| **lorad** | included in KerOS 5.5.4 firmware |
| **lorafwd** | included in KerOS 5.5.4 firmware |
Starting from version 4.3, KerOS firmware is delivered with Kerlink Common Packet Forwarder and WMC Embedded applications. These applications are disabled by default and need to be enabled to use the gateways on WMC. \\
\\
There are 3 ways to update your gateway's software:
* by using the [[wiki:wiki3:magic_link|Magic Link]]
* by using an [[.gateway_sw_4.3.3#software_update_over_usb|USB stick]]
* by using an [[.gateway_sw_4.3.3#software_update_over_ethernet|network connection (ethernet, cellular or wifi over SSH)]]
* over WMC dashboard, by using the [[wiki:wiki3:install_upgrade#wmc_drag_n_drop_feature|Drag and drop feature]]
\\
===== Software update over the network from Keros 4.3.3 =====
\\
This procedure can be used to **UPGRADE from a KerOS 4.3.3 system** on a **single** gateway. \\
To update your gateway, apply the following procedure:
- Request your VPN package(s) to the Kerlink Support team: [[support@kerlink.fr]] (optional: in case of a First Install or Migration)
- Transfer package(s) in this directory:
# From a computer:
scp custom-liveburner_5.5.4_klkgw-signed.ipk root@:/user/.updates/
- Trigger Update for next reboot: kerosd -u
- Restart: reboot Refer to [[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_update_over_network|software update procedure]] for further details.
- Configure the gateway to use the WMC: klk_apps_config --activate-wmc -s wmc-server-name Replace 'wmc-server-name' by the server name to which the gateway should connect.
* Example for the POC WMC (https://wmc-poc.wanesy.com/): klk_apps_config --activate-wmc -s wmc-poc.wanesy.com
\\
===== Software update over USB from Keros 4.3.3 =====
This procedure used for automatic deployment can be used to **UPGRADE from a KerOS 4.3.3 system** on a **single** or a **group of gateways**. \\
If you want to install this software from a KerOS 3.x, you need to install a KerOS 4.3.3 before upgrading your system:
[[https://wikikerlink.fr/wanesy-ran/doku.php?id=wiki:wiki3:gateway_sw_4.3.3|SW_4.3.3]]
To update your system from a KerOS 4.3.3 system, you will need to create 2 USB sticks:
The first USB stick will install the firmware 5.5.4 with embedded BSCC, SNMP and CPF. \\
The second USB stick will configure the VPN to connect to your WMC server (klk_apps_config).
^description ^file ^md5sum ^
|**USB stick ** | {{ :wiki3:auto_deploy_custom-liveburner_5.5.4_usb_stick_1.tar.gz | AUTO_DEPLOY_CUSTOM-LIVEBURNER_5.5.4_USB_STICK_1.tar.gz }} | 541ccd3383e3fef61dbbe9f6f7ff2955 |
|**USB stick ** | {{ :wiki3:auto_deploy_custom-liveburner_5.5.4_usb_stick_2.tar.gz | AUTO_DEPLOY_CUSTOM-LIVEBURNER_5.5.4_USB_STICK_2.tar.gz }} | d5ad656cd9ce79fdf5dcc1894a6f3a02 |
**The .tar.gz files provided below are "ready-to-use"**.
You only need to copy your OpenVPN secrets files in //vpn_packages// directory for the USB stick 1 and update the file 'wmc-server-name.txt' for the USB stick 2 to set your WMC server name in order the gateway to connect properly to your WMC server.
\\
To update your gateway, apply the following procedure :
> 1. Deflate twice the AUTO_DEPLOY_CUSTOM-LIVEBURNER_5.5.4_USB_STICK_1.tar.gz file to get .ipk files and put them on your USB stick in the root directory
> 2. Copy all files located in the folder AUTO_DEPLOY_CUSTOM-LIVEBURNER_5.5.4_USB_STICK_X in the root directory
> 3. Request your VPN secret package(s) v4.3 to the Kerlink Support team: [[support@kerlink.fr]] (optional: in case of a First Install or Migration or Upgrade)
> 4. Put your VPN secrets packages of your KerOS products in the //vpn_packages// directory (optional: in case of a First Install or Migration or Upgrade)
> 5. Plug the first USB stick in the gateway USB slot (device must be powered on)
> 6. Wait for the leds blinking and unplug the USB stick from the slot
> 7. The system reboots
> 8. Wait for the end of the update
> 9. Deflate twice the AUTO_DEPLOY_CUSTOM-LIVEBURNER_5.5.4_USB_STICK_2.tar.gz file to get .ipk files and put them on your USB stick in the root directory
> 10. Copy all files located in the folder AUTO_DEPLOY_CUSTOM-LIVEBURNER_5.5.4_USB_STICK_2 in the root directory
> 11. Update the 'wmc-server-name.txt' file with the name of your wmc server in the second USB stick. Example: For the POC WMC (https://wmc-poc.wanesy.com/), the content of the file is ''wmc-poc.wanesy.com''.
> 12. Plug the second USB stick in the gateway USB slot (device must be powered on)
> 13. Wait for the leds blinking and unplug the USB stick from the slot
> 14. The system reboots
> 15. Wait for the end of the reboot
Refer to the specific wiki to get more details about software update over USB: \\
**Wirnet i-series (iBTS, iFemtocell, iStation, iFemtoCell-evolution)**: [[http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:keros_custo:sw_updates#software_update_over_usb]] \\
\\
\\
==== USB stick 1 content ====
The USB tree should contains the following files/folders:
/
└── COMMON # Common packages folder
| └── custom-liveburner_5.5.4_klkgw-signed.ipk # Keros v5.5.4 firmware package
|
├── README.txt # This file
├── usb.autorun # executed by KerOs products when plugging the USB stick
├── usbkey.txt # USB key protection: must contain the device passwords (all of them)
└── vpn_packages # WMC OpenVPN packages folder
├── openvpn_***_wmcbeta.wanesy.com_***_4.3.ipk # OpenVPN package for one KerOS product to connect to a WMC platform (here wmcbeta)
├── openvpn_***_wmcbeta.wanesy.com_***_4.3.ipk # another package for one KerOS product to connect to a WMC platform (here wmcbeta)
├── openvpn_***_wmcbeta.wanesy.com_***_4.3.ipk # ...
├── openvpn_***_wmcbeta.wanesy.com_***_4.3.ipk # ...
├── openvpn_***_wmcbeta.wanesy.com_***_4.3.ipk # ...
├── openvpn_***_wmcbeta.wanesy.com_***_4.3.ipk # ...
└── openvpn_***_wmcbeta.wanesy.com_***_4.3.ipk # ...
\\
==== USB stick 2 content ====
The USB tree should contains the following files/folders:
/
├── README.txt # This file
├── usb.autorun # executed by KerOs products when plugging the USB stick
├── usbkey.txt # USB key protection: must contain the device passwords (all of them)
└── wmc-server-name.txt # WMC server name (ex: wmc-poc.wanesy.com)
\\
===== Software update over the network from Keros 4.3.3 =====
\\
This section explains how to upgrade a i-Series gateway from a KerOS 4.3.3 to KerOS 5.5.4. \\
{{:wiki3:fw_4.3.3_gw.png?600|}}
**You cannot update directly from Keros <4.3.3 to Keros 5.5.4**
To achieve this, you will put in the Software repository the package needed to update to Keros 5.5.4.
==== Put Software packages in the Software Repository ====
Get the packages from the WIKI download page: [[https://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:firmware:lastversion]] \\
Then drag & drop the packages in the drag & drop area.
{{:wiki3:sw_repository_2.png?600|}}
* **custom-liveburner_5.5.4_klkgw-signed.ipk**: the package to update all i-series products to Keros 5.5.4 from a Keros 4.3.3.
==== Create the workflow ====
You must be SUPER_ADMIN to be able to create the workflow.
{{:wiki3:create_workflow_update_from_keros_4.3.3.png?800|}}
Define 1 task: \\
* **Task #1**: updateGatewaysManagedSoftware
\\
==== Select Gateways ====
Select the gateways to update.
Care that all gateways must be on the same type (iBTS or iFemtocell).
{{:wiki3:2022-select_gateways_same_type.png?800|}}
==== Configure the workflow ====
Configure the workflow like this :
{{wiki3:2022-configure_workflow.png?800|}}
* **Task #1**: select the ''custom-liveburner_5.5.4_klkgw-signed.ipk'' \\
Task #1 is designed to update your firmware from KerOS 4.3.3 to KerOS 5.5.4. \\
==== Execute the workflow ====
Push the ''START'' key to run the workflow.
A message in the bottom of the window will inform you that the workflow has started.
{{:wiki3:workflow_started.png?500|}}
==== Check the workflow status ====
Check the workflow status in the Workflows menu.
* when running, the workflow will appear in the 'Running' page. \\
* when completed, the workflow will appear in the 'Completed' page. \\
{{:wiki3:2022-workflow_running.png?800|}}
Caution: In some cases, the completed status will arrive around 2h-3h after the workflow start and the task can stay in pending state during a long time.
So don't wait the completed status, wait about 20/30' for update to be completed and go directly to the next step.
==== Check the update ====
For each gateway defined in the workflow, check that the firmware has been correctly updated to 5.5.4.
===== Changelog =====
Main changes regards to the 4.3.3 embedded software release are listed below:
* Support of Wirnet iZeptoCell Ethernet
* Support of Helium network
* Linux Kernel update to new LTS (Long Term Support)
* Linux Kernel LTS 5.4
* Yocto 3.1.7
* Upgrade to OpenSSL 1.1.1k
* Upgrade to Connman 1.37 and Ofono 1.31
* Upgrade of Python from 2.x to 3.x
* New Secure Core software (needed for Helium miner)
* Fix: no NTP synchronization with GPS without internet
* Fix: APN v.sarenet.es is refused by Ofono
Please note that, if gateways use public IP, it also makes your gateway accessible from Internet on open SSH or HTTP ports (protected by passwords). Kerlink so recommends to change passwords as described in [[https://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:systeme_mana:connection_credentials|Connection, login and credentials]]
\\
\\
===== Warranty =====
**CAUTION ABOUT WARRANTY:** \\
**Kerlink is not responsible for damages resulting from failure to follow these instructions relating to the Kerlink Product’s use.**