====== Wanesy Management Center v2.2 ======
===== Megapackage ======
The //megapackage// upgrades all mandatory packages onto your system (BSCC, SNMP, LoRa HAL, Packet Forwarder), except for the OpenVPN package.
This package preserves any change to your current network configuration (VPN and GSM/ETH configuration).
This megapackage can be used as well remotely (from WMC dashboard for instance) and locally (USB, debug link, SSH).
It is recommended to use the MEGAPACKAGE.
==== Prerequisites ====
=== Generic ===
- It is recommended to have a DHCP server on your local network. The use of static IP can lead to a connection issue to the WMC.
- It is recommended to update the OpenVPN package to v1.11 before using the megapackage
- The //megapackage// can only be used on a gateway that is already connected to the WMC
If you never installed any OpenVPN certificate on your gateway, you should ask for an OpenVPN certificate to ''support@kerlink.fr'' and install it on your system. In this case, you need to install all the packages via a local access (USB, debug link, SSH) using the compatibility matrix below.
=== Wirnet Station ===
If your **BSCC** and **SNMP** packages are WMC 2.0 compatible (e.g. v1.13), you must **first install the [[wiki:ran_2.1|WMC 2.1 packages]]** before using the megapackage.
DO NOT USE THE MEGAPACKAGE IF YOUR FIRMWARE VERSION IS LOWER THAN v3.1
If you have a 2.x firmware, please use the ''[[http://wikikerlink.fr/lora-station/doku.php?id=wiki:resources_wirnet_v_3.1|create_dota_2x_wirnet3.sh]]'' script to migrate to v3.1 firmware version
=== Wirnet iFemtoCell / Wirnet iBTS ===
Before installing the megapackage, you should **remove the old libloragw** library by installing the following special package on your system : \\
For iFemtoCell: {{ :wiki:libloragw-remove-backup.ipk |}} \\
For iBTS: {{ :wiki:libloragw2-remove-backup.ipk |}} \\
Don't be afraid by the following message: that simply indicates that the package is not present in the backup storage:
Remove package from libloragw-remove.ipk: ERROR (255)
==== Download and installation ====
^ Product ^ Megapackage |
| Wirnet iBTS | {{ :wiki:ran_gateway_lpbs_v2.2.1.tar.gz |}} |
| Wirnet Station | {{ :wiki:dota_ran_gateway_v2.2.2.tar.gz |}} |
| Wirnet iFemtoCell | {{ :wiki:ran_gateway_wifc_v2.2.1.tar.gz |}} |
To update your system, you can use the //drag&drop// software update feature from the WMC dashboard interface.
**For Keros sytems** (Wirnet iBTS and Wirnet iFemtoCell), don't forget to uncompress the mega-package before upgrading the system!
For example:
tar xzvf *ran_gateway*.tar.gz
===== Compatibility Matrix =====
If the gateway does not meet the prerequisites of the //megapackage// or if you want to, the packages can be manually installed onto the system as specified in the compatibility matrix:
^ Product ^ BSCC ^ SNMP ^ Firmware ^ LoRa HAL ^ Packet Forwarder ^ VPN ^
| Wirnet iBTS | {{ :wiki:bscc_v2.2.1_klk_lpbs.ipk | bscc_v2.2.1}} | {{ :wiki:lorasnmp_v2.2.1_klk_lpbs.ipk | snmp_v2.2.1}}| [[http://wikikerlink.fr/wirnet-ibts/doku.php?id=resources:resources_keros_fw_3.1.16|keros 3.1.16]] | {{ :wiki:libloragw2_5.1.0-klk1_klk_lpbs.ipk | libloragw2_5.1.0-klk1 }} | {{ :wiki:spf2_5.1.0-klk2_5.1.0-klk1_klk_lpbs.ipk | spf2_5.1.0-klk2_5.1.0-klk1 }} | 1.11 |
| Wirnet Station | {{ :wiki:dota_v2.2.1_bscc.tar.gz | dota_v2.2.1_bscc}} | {{ :wiki:dota_v2.2.1_snmp.tar.gz | dota_v2.2.1_snmp}} | {{ :wiki:usbflashdrive_wirmav2_wirnet_v3.3.zip |usbflashdrive_wirmav2_wirnet_v3.3}} | {{ :wiki:custo_libloragw-fpga_4.1.3-klk7_wirnet.tar.gz |custo_libloragw-fpga_4.1.3-klk7_wirnet}} | {{ :wiki:dota_spf_3.1.0-klk15_4.1.3-klk7_wirnet.tar.gz |spf_3.1.0-klk15_4.1.3-klk7_wirnet}} | 1.11 |
| Wirnet iFemtoCell | {{ :wiki:bscc_v2.2.1_klk_wifc.ipk | bscc_v2.2.1_wifc}} | {{ :wiki:lorasnmp_v2.2.1_klk_wifc.ipk | lorasnmp_v2.2.1_wifc}} | [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:resources_fw_3.1.14|keros 3.1.14]] | {{ :wiki:libloragw-fpga_4.1.3-klk7_klk_wifc.ipk |libloragw-fpga_4.1.3-klk7_klk_wifc}} | {{ :wiki:spf_3.1.0-klk15_4.1.3-klk7_klk_wifc.ipk |spf_3.1.0-klk15_4.1.3-klk7_klk_wifc}} | 1.11 |
=== Wirnet iFemtoCell / Wirnet iBTS ===
Before installing the new libloragw library, you should **remove the old libloragw** library by installing the following special package on your system : \\
For iFemtoCell: {{ :wiki:libloragw-remove-backup.ipk |}} \\
For iBTS: {{ :wiki:libloragw2-remove-backup.ipk |}} \\
Don't be afraid by the following message: that simply indicates that the package is not present in the backup storage:
Remove package from libloragw-remove.ipk: ERROR (255)
===== Release notes =====
==== Main Changes ====
* Full support of Class C end-devices
* New packet forwarder KPIs
* Uptime per period of time
* Number of restarts per period of time
* Workflow editor
* Spectrum analysis support for Wirnet Stations
* Display of all uplink and downlink messages for each end-device
* Per-cluster payload encoding using HEX or BASE64
* Improved CSV export of gateways and end-devices
* Enhanced mass creation or deletion of gateways or end-devices
==== Main Improvements ====
* WMC interface automatic page refresh doesn't generates random "Server error" messages
* Cluster configuration update does not need push password to be filled in
* Superadmin role is not limited on alarms menu
* RNC cluster filter is working
* Wirnet Station KPI "Downlink bytes" is supported
* Wirnet Station VPN/Supervision configuration doesn't update gateway onboard parameters
* Https can be configured within the push URL using the dashboard
==== Main Restrictions ====
* Trusted Key Management is not fully supported
* VPN IP address modification is not displayed on dashboard
* Spectrum analysis is not supported on Wirnet iFemtoCells
* RX timestamp not available when GPS is not locked
* Unknown gateway interface label is sometimes displayed
* RNC raw radio configuration update doesn’t indicate ignored changes