Packet Forwarder Configuration

The configuration of the packet forwarder is usually done through the web interface.

If the configuration has to be changed manually from the gateway, in order to have the WMC show the updated data, the following steps have to be performed:

1. Edit the configuration files manually (SSH or debug probe).
2. Restart the SNMP daemon.

Instructions:

• For Wirnet Station.
• For Wirnet iBTS.
• For Wirnet iFemtoCell.

• For KerOS (Wirnet iBTS, Wirnet iFemtoCell):

  /user/snmp/snmpd.init restart

• For Wirnet Station:

  kmstool appstop snmpd
  kmstool appstart snmpd