What's new ?

Main changes:
- Improving Join procedure : 
  * Adding possibility to configure DevNonce feature (only applicable for OTAA devices) from dashboard and GMS API: activation/de-activation.
  * Taking into account the technical recommendations for preventing state synchronization issues around LoRaWAN™ 1.0.x join procedure.
- Improving MIC error management: 
  * Differenciating counter issues and MIC error. Providing more information about MIC errors: "Reused FCntUp", "Exceed FCntUpMAxGap", "Invalid MIC".
- Improving Software Update :
  * Adding the possibility to upload and delete software update to the server repository. Selecting a software available in the server repository and using it through workflow and GMS API.
- Improving Backhaul configuration:
  * Adding the possibility to configure Ethernet static IP (DHCP deactivated), with optionally first and second DNS.
  * Adding the possibility to configure cellular backhaul: APN (1 for Wirnet Station and up to 10 for Wirnet iBTS, iFemtoCell, and iStation), login, password, MCC, MNC.
- KPI Management:
  * Adding the option to stop end-devices KPIs computing.
- Improve end-devices and gateways export and import:
  * Export a list of end-devices or gateways to CSV format, with fields (all or only authorized ones) sorted by category.
  * Import a previous export of end-devices or gateways.
- Adding a cluster overview:
  * Panel with all the cluster information: name, customer, payload type, push enabled, push configuration, geolocation, geolocation expiration date.
  * Histogram bar with the actual status of all the cluster's end-devices.
- Better support of AS923 region countries:
  * Specific regional parameters defined for Japan, Indonesia, and Vietnam.
- Provide payload encoding:
  * Add new field “encodingType” (Base 64 or Hexadecimal)in DataUpDto and PushDataUpDto.
  * On the dashboard, display encoding type used for payload (dataUp, dataDown, mcDataDown, messages).
- Radio channels configuration : 
  * sharing gateway channel configuration between BSC and LNS: The end-device's CFlist is created from the gateway radio channel configuration.
  * Improve mac commands: send / receive mac commands.
  * Multiple gateways with possible different channel configurations.
- Support of additional Wirnet stations: 
  * Support of Wirnet iStation (with Embedded 3.2.x Software release).
  * Support of Wirnet iFemtoCell-evolution (with Embedded 3.3.x Software release).
- Management of 16-channels configuration:
  * By default, only 8 channels are configured after CFList within the Join Accept.
  * For regions with dynamic channels plans, the end-devices are now informed of the additional 8 channels by NewChannelReq dedicated MAC command(s)
- Timestamping for buffering feature :
  * In case of network latency or backhaul disconnection, the message is delayed so the reception timestamps from gateway and WMC can be different.
  * Separation between message receive timestamps from gateway and WMC.
  * Parameter gwRecvTimeadded to figure out the gateway reception timestamp.
  * Both timestamp values (gwRecvTime and recvTime) are displayed on dashboard and pushed to the end user in DataUpDto
- When immediate sending, RX window choice is no more based on the networkMaxDelays, current ping value is now used.
- Add possibility to filter on power-loss alarm.
- Improvement of downlink messages process:
  * For classA & classC, downlinks are now sent to the gateways immediately after being provisioned by LNS in order to increase the chance to target the RX1 window.
- Improvement of RX1DROfsset management:
  * RX1DROffset=0 (no offset applied on DR) is now used for JOIN Accept.
  * RX1DROffset=n (if set) is only applied on subsequent downlinks.
- Support of Wirnet iZeptoCell capabilities in BSC (3.2.10)
- Support of SX1302 radio configuration (3.2.10)
- FUOTA feature (3.2.10):
  * Add check of odd Frag Number to prevent starting a FUOTA
  * Add check of start date to prevent starting a FUOTA
  * Add check of configuration consistency to prevent starting FUOTA
- Disable modem information table in overview (3.2.10)
- Disable spectrum menu as it is not supported (3.2.10)
- Enrich displaying of job in progress with synthetic view (3.2.10)
- Remove support of duty cycle for US915 and AU915 regions (3.2.10)

Main restrictions:
Some residual cases of downlinks stucked in Class C.

This new software release v4.3.3 implements new features such as:

Main changes:
- Integration of CPF in KerOS 4.3.3 firmware
- Integration of WMC Embedded applications 4.3.3 firmware
- Add NetID Filtering in CPF
- Increase CPF log size
- Uplink: fix fallback from Ethernet to GSM if no DNS server
- CPF: fix reconnection to LNS server after an uplink reconnection

This new software release v3.3 implements new features such as:

Main changes:

- iFemtocell-evolution gateway support
- Backhaul configuration improvement
- Spectral scan improvement on iStation and iFemtocell-evolution
- Power management improvement
- Allow Internet access while connected to WMC

Main Restrictions:

- Spectral scan with LBT mode enabled does not work properly

This new software release v3.2 implements new features such as:

Main changes:

- iStation gateway support
- New power management for iStation
- Backhaul configuration improvement


Main Restrictions:
 
- Spectral scan with LBT mode enabled does not work properly

More information about iStation features here

This new software release v3.1 implements new features such as:

Main changes:

- Geolocation features intégration for compatibility with WG Standalone (GUI and API)
- New GUI tab for Geolocation for End-devices (when WG is activated and connected to the MWC)
- Map and measurements table for end-devices position computing
- Spectrum analysis is supported on Wirnet iFemtoCell
- Wirnet iBTS 64 Highway is supported
- Backhaul monitoring on Wirnet iBTS and iFemtoCell
- Upgrade to FW 4.0 on Wirnet iBTS and iFemtoCell
- Upgrade to FW 3.6 on Wirnet Station
- Upgrade to CPF (Common Packet Forwarder) on all Kerlink gateways
- Buffering up to 200 messages per gateway
- Class B support on Wirnet iBTS and Station
- Publish data up and data down event to a MQTT broker
- Push diagnostic
- Support for custom headers
- Support for specific routes for data up and data down event
- Push configuration
- Data down cancellation
- End-devices naming
- Strong password
- Support for antenna gain and insertion loss
- Improve license keys
- SwaggerUI integration 
- CFlist support in OTAA mode and channel learning in ABP mode for data up
- Add customerID and clusterID in MDR (Message Details Record)
- Improve data down status
- Full removal of a customer
- Variable pull out from YML configuration
- Set Frame Counters at dashboard level
- Stay compatible with tunneling tools 1.11
- Support of tunneling tools 3.1
- Shorter gateways description
- SNMP MIB split to a public and private part

Main Restrictions:

- VPN IP address modification is not displayed on dashboard
- Dashboard timeout on large file upload with slow connections
- The backhaul configuration can’t be done using the dashboard for configuration without DHCP (missing DNS) and cellular (missing MCC and MNC)
- Backhaul priority is not working 

Main changes:

- New LNS:
    -New engine with full support of the LoRaWan 1.0.2 revision C
    -Dwell time
    -CF List declared at the end-device creation
    -RX1DROffset
    -Support of multicast class C
    -Respect the duty cycle per gateway
    -Deal with “Not Ack” received from the packet forwarder including LBT
    -Support of the following regions with multiple revisions: AU915, CN470, CN779, EU433, EU868, US915, AS923, KR920, IN865, RU864
    -Improve join diagnostic messages
    -Capability to enable adaptative latency on a gateway when the network latency is stable
    -Capability to disable downlink per gateway

- New API and KPI:
    -Replace OSS by GMS
    -More generic web services and short paths
    -No longer dedicated web service to poll asynchronous web services
    -JSON available usable with Swagger Editor
    -Online html documentation
    -Add a new KPI “Ping” to measure the latency from the gateway to the server

- New dashboard:
   -Redesigned with focus on gateway and end-device
   -Add a summary bar
   -Group all the information accessible from one view
   -Display data down RX window, frequency and data rate
   -Add a notification view
   -Gateways and end-devices selections always visible
   -Edit maximum TX power on a gateways selection
   -Define the user’s role at the creation
   -Customizable logo per WMC instance
   -Remove modem statistics

Main restrictions:

-VPN IP address modification is not displayed on dashboard
-Spectrum analysis is not supported on Wirnet iFemtoCells
-Dashboard timeout on large file upload with slow connections