User Tools
Sidebar
playground:wiki3:faq_staticip_3.x
This is an old revision of the document!
Table of Contents
FAQ - Static IP configuration
How to configure Static IP assignment for my gateway ?
The Static IP assignment must be done for a gateway from “scratch” (only FW is available).
It is not recommanded to desactivate DHCP while connecting to the WMC.
This can imply a connection loss to the WMC.
It is not recommanded to desactivate DHCP while connecting to the WMC.
This can imply a connection loss to the WMC.
Changing the network configuration throught the WMC dashboard is not recommanded. Doing this through the local configuration is the good way since DNS configuration cannot be done through the dashboard.
For Wirnet Station, set new DNS and static IP assignment in /etc/sysconfig/network file (don't forget to set dhcp to 'n')
For KerOS systems (Wirnet iBTS, Wirnet iFemtoCell), you should issue a SSH connection to setup gateway IP assigment and DNS servers addresses.
Refer to the specific Wiki to setup static IP for your gateway:
Wirnet Station: http://wikikerlink.fr/lora-station/doku.php?id=wiki:faq#how_to_configure_static_ip_address
Wirnet iBTS: http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:backhaul_3.3.3
Wirnet iFemtoCell: http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:network_3.4.4
playground/wiki3/faq_staticip_3.x.1553096585.txt.gz · Last modified: 2019/03/20 16:43 by tda
