User Tools

Site Tools


Sidebar

playground:wiki3:faq_staticip_3.x

This is an old revision of the document!


FAQ - Static IP configuration


How to configure static IP assignment for my gateway ?

The static IP assignment must be done for a gateway from “scratch” (only FW is available).
Do not disable DHCP from the WMC dahsboard.
This can imply a connection loss to the WMC.

Changing the network configuration through the WMC dashboard is not recommended. Doing this through the local configuration is the good way since DNS configuration cannot be done through the dashboard.

Refer to the specific Wiki to setup static IP for your gateway:

Wirnet Station: http://wikikerlink.fr/lora-station/doku.php?id=wiki:faq#how_to_configure_static_ip_address
Wirnet iBTS: http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:backhaul_3.3.3#ethernet_configuration
Wirnet iFemtoCell: http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:network_3.4.4#ethernet_configuration

playground/wiki3/faq_staticip_3.x.1560518475.txt.gz · Last modified: 2019/06/14 15:21 by tda