User Tools
Sidebar
playground:wiki3:faq_staticip_3.x
This is an old revision of the document!
Table of Contents
FAQ - Static IP configuration
How to configure static IP assignment for my gateway?
The static IP assignment must be done for a gateway from “scratch” (only FW is available).
Do not disable DHCP from the WMC dahsboard.
This can imply a connection loss to the WMC.
Do not disable DHCP from the WMC dahsboard.
This can imply a connection loss to the WMC.
Changing the network configuration through the WMC dashboard is not recommended since DNS configuration cannot be achieved.
Refer to these specific Wikis to setup static IP for your gateway:
Wirnet Product line: http://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:backhaul#ethernet_configuration
Wirnet Station: http://wikikerlink.fr/lora-station/doku.php?id=wiki:faq#how_to_configure_static_ip_address
Wirnet iBTS: http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:backhaul_3.3.3#ethernet_configuration
Wirnet iFemtoCell: http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:network_3.4.4#ethernet_configuration
playground/wiki3/faq_staticip_3.x.1561038683.txt.gz · Last modified: 2019/06/20 15:51 by tda
