Wanesy RAN connectivity needs the latest version of the following packages installed on the gateway:

• Keros firmware
• BSCC package
• SNMP package
• Packet forwarder package
• OpenVPN package (contact support@kerlink.fr)

These packages can be downloaded from the Software Releases page.

The OpenVPN package can be installed on the sytem by the same manner as any other package.

See the instructions on how to use the USB or network update to install the IPK file provided by the support team:

1. iBTS
2. iFemtoCell

See the instructions on how to install a DOTA package on your station.

Check The LoRa packet-forwarder configuration :

• For wirnet station : /mnt/fsuser-1/spf/etc/local_conf.json
• For iBTS : /user/spf2/etc/config.json
• For iFemtoCell : /user/spf/etc/local_conf.json

Check following parameters :

• server_address: lns (or “172.18.0.1” if you experience issues or if the support teams asked you to do so)
• serv_port_up: 1700
• serv_port_down: 1700

You need to declare your new gateway in an existing fleet (create it first if necessary), using its EUI.

This EUI can be found in the gateway_ID generated JSON file:

grep -r gateway_ID /tmp