Wanesy RAN connectivity needs the latest version of the following packages installed on the gateway:

• Keros firmware
• BSCC package
• SNMP package
• Packet forwarder package
• OpenVPN package (contact support@kerlink.fr)

These packages can be downloaded from the Software Releases page.

The OpenVPN package can be installed on the sytem in the same manner as any other package.

Package installation procedure is described on the product dedicated wiki page :

• Wirnet iBTS
• Wirnet iFemtoCell
• Wirnet station

In LoRa packet-forwarder configuration file :

• For Wirnet station : /mnt/fsuser-1/spf/etc/local_conf.json
• For Wirnet iBTS : /user/spf2/etc/config.json
• For Wirnet iFemtoCell : /user/spf/etc/local_conf.json

Parameters to check are :

• server_address: lns (or “172.18.0.1” if you experience issues or if the support team asked you to do so)
• serv_port_up: 1700
• serv_port_down: 1700

New gateways must be declared in an existing fleet (create it first if necessary), using their EUI.

This EUI can be found in the field gateway_ID of the generated JSON file:

• For wirnet station : grep -r gateway_ID /mnt/fsuser-1/spf/etc/local_conf.json
• For iBTS : grep -r gateway_ID /user/spf2/etc/config.json
• For iFemtoCell : grep -r gateway_ID /user/spf/etc/local_conf.json