WMC v2.3 wiki
Product Overview
Using
OSS API*
Advanced
Resources
Product Overview
Using
OSS API*
Advanced
Resources
This is an old revision of the document!
The network channels can be freely attributed by the network operator. However the three following default channels must be implemented in every end-device. Those channels are the minimum set that all network gateways should always be listening on.
Please refer to the LoRaWAN™ Regional Parameters for a full description of the applicable parameters in your region.
Modulation | Bandwidth [kHz] | Channel Frequency [MHz] | FSK Bitrate or LoRa DR / Bitrate | Nb Channels | Duty cycle |
---|---|---|---|---|---|
LoRa | 125 | 868.10 868.30 868.50 | DR0 to DR5 / 0.3-5 kbps | 3 | <1% |
Modulation | Bandwidth [kHz] | Channel Frequency [MHz] | FSK Bitrate or LoRa DR / Bitrate | Nb Channels |
---|---|---|---|---|
LoRa | 125 | 865.0625 865.4025 865.985 | DR0 to DR5 / 0.3-5 kbps | 3 |
Modulation | Bandwidth [kHz] | Channel Frequency [MHz] | FSK Bitrate or LoRa DR / Bitrate | Nb Channels | Duty cycle |
---|---|---|---|---|---|
LoRa | 125 | 923.20 923.40 | DR0 to DR5 / 0.3-5 kbps | 6 | <1% |
Modulation | Bandwidth [kHz] | Channel Frequency [MHz] | FSK Bitrate or LoRa DR / Bitrate | Nb Channels | Duty cycle |
---|---|---|---|---|---|
LoRa | 125 | 922.10 922.30 922.50 | DR0 to DR5 / 0.3-5 kbps | 6 | <1% |
Configure a list of radio channels that is appropriate for the hardware used.
For example, the Wirnet station radio has two transceivers:
They have a 1.2MHz bandwidth each, so you need to configure the channels in accordance to this: