The megapackage upgrades all mandatory packages onto your system (firmware, BSCC, SNMP, LoRa HAL, Packet Forwarder), except for the OpenVPN package.

This package preserves any change to your current network configuration (VPN and GSM/ETH configuration). This megapackage can be used as well remotely (from WMC dashboard for instance) and locally (USB, debug link, SSH).

1. It is recommended to have a DHCP server on your local network. The use of static IP can lead to a connection issue to the WMC.
2. It is mandatory to update the OpenVPN package to v1.11 before using the megapackage
3. The BSCC and SNMP packages must be in at least the WMC 2.1 or WMC 2.2 version.

If the gateway uses older BSCC/SNMP packages, the megapackage 2.1 must be installed before the megapackage 2.3 can be installed.

If you never installed any OpenVPN certificate on your gateway, or if you need a newer VPN package version, you should ask for a VPN package to support@kerlink.fr and install it on your system.

Use the following command to check the currently installed packages (example shows iBTS):

root@klk-lpbs-123456:~ # opkg list
bscc - v2.2.1                                   # <------ BSCC package version
kerlink-openvpn-config-pki2-klk-lpbs-123456 - 1.11-180326
keros - 3.1.16-0-gfd3610aa
libloragw2 - 5.1.0-klk1
lorasnmp - v2.2.1                               # <------ SNMP package version
spf2 - 4.0.0-klk7_4.0.1-klk3

To check this, you must have a FILESYSTEM_VER ending with either 1.5 (firmware 3.1) or 1.10 (firmware 3.3). This can be found in the result of get_version -u -v (see below).

If you have a 2.x firmware, please use the create_dota_2x_wirnet3.sh script to migrate to v3.1 firmware version

Please run the following command on your Wirnet Station:

[root@Wirnet_0XXXXXXX ~]# get_version -u -v
KERNEL_VER=3.10.104-3.10.104-klk7
PIC_VER=8.3
BOOTSTRAP_VER=""
UBOOT_VER="U-Boot 2009.03-2009.03-klk1 (Jan 26 2018 - 12:04:27)"
SCRIPT_VER=v1.0
INITRAMFS_VER=v1.3
FILESYSTEM_VER=2016.05v1.10                                # <---- firmware version
KNETD_VER="wirma2_v4.09 WAN_3.16 (Dec 23 2016-14:33:40)"
PROD_FW=wirmaV2_wirnet_v3.1-rc3
LORABOARD_MANUFACTURER=00
LORABOARD_TYPE="868-27dBm"
LORABOARD_HWVERSION=05
LORABOARD_SERIALNO=00XXXX
 
************************ Update log ************************
2018.03.15-08:30:07 -- Dota dota_ran_gateway_v2.2.2_5a61ea01-2967-4d0e-a12b-9acd72e2fa40.tar
2018.03.15-08:31:04 -- Dota custo_openvpn.tar
2018.03.15-08:31:08 -- Dota dota_packages_v2.2.tar
2018.03.15-08:31:58 -- Dota custo_libloragw-fpga_4.1.3-klk7_wirnet.tar
2018.03.15-08:32:05 -- Dota dota_spf_3.1.0-klk15_4.1.3-klk7_wirnet.tar
2018.03.15-08:32:07 -- Dota dota_v1.0_rfscan_manager.tar
2018.03.15-08:32:12 -- Dota dota_v2.2.1_bscc.tar           # <---- BSCC package version
2018.03.15-08:32:19 -- Dota dota_v2.2.1_snmp.tar           # <---- SNMP package version
************************************************************

To update your system, you can use the drag&drop software update feature from the WMC dashboard interface.

None

• Notification: GPS and door status added on hello inform (message sent when station comes online)

• Global
  • Reset default configuration for ntp and rssi
  • Spectrum scanner: for Asian stations, bad frequencies are displayed
  • Improve status notification following an update
  • Working directory of command execution is no longer the bscc folder
  • Return error if command fails
• KerOS (Wirnet iBTS and Wirnet iFemtoCell)
  • correction to avoid network reset after every bscc startup
• Wirnet iFemtoCell
  • Force door and gps status to unknown
  • Compute PSU voltage
• Wirnet iBTS
  • Fix Bad RSSI value
• Wirnet Station
  • Add version to OpenVPN configuration package
  • Fix bearers priority

Known issues are listed:

• On Wirnet Station, static IPs (network without DHCP) need a change of DNSSERVER variables (in /etc/sysconfig/network)
• On Wirnet iFemtoCell, no modem is handled so no spectrum available
• On Wirnet iBTS, GSM configuration needs an SSH link and manual command to provision ofono (edit /etc/network/ofono/provisioning and add MCC/MNC/APN)