Wanesy™ Management Center (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Packet Forwarder Configuration ======

The configuration of the packet forwarder is usually done through the web interface.

===== How to manually edit the packet forwarder configuration =====

If the configuration has to be changed manually from the gateway, in order to have the WMC show the updated data, the following steps have to be performed:

  - Edit the configuration files manually (SSH or debug probe).
  - Restart the SNMP daemon.

==== Edit the configuration files ====

Instructions:

  * For [[http://wikikerlink.fr/lora-station/doku.php?id=wiki:lora_modem_management#how_to_configure_the_packet_forwarder|Wirnet Station]].
  * For [[http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:spf|Wirnet iBTS]].
  * For [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php?id=wirnet-ifemtocell:lora_modem-management|Wirnet iFemtoCell]].

==== Restart the SNMP daemon ====

  * For KerOS (Wirnet iBTS, Wirnet iFemtoCell): <code bash>/user/snmp/snmpd.init restart</code>
  * For Wirnet Station: <code bash>
kmstool appstop snmpd
kmstool appstart snmpd
</code>

Wanesy™ Management Center (End Of Life)

User Tools

Site Tools

Page Tools