SCALAR OBJECTS

Name	Type	Access	OID	Description
cpuCurrent	UNSIGNED32	ReadOnly	.1.3.6.1.4.1.46911.1.2.1.1	The current CPU level expressed in percent.
cpuAlarmState	INTEGER Value Label/Meaning 1 cpuAlarmOn 2 cpuAlarmOff	ReadOnly	.1.3.6.1.4.1.46911.1.2.1.2	The current CPU alarm status. 0 indicates an unknown value.
cpuAlarmThreshold	UNSIGNED32	ReadWrite	.1.3.6.1.4.1.46911.1.2.1.3	cpu usage threshold. When reached, a cpu alarm is sent
cpuAlarmHysteresis	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.1.4	cpu alarm hysteresis expressed in percent. Used in conjunction with threshold to stop the alarm when cpu is below abs(threshold - hysteres- is).
diskSystemVolumeCurrent	UNSIGNED32	ReadOnly	.1.3.6.1.4.1.46911.1.2.2.1	The current storage level of system disk volume expressed in percent of volume used.
diskSystemAlarmState	INTEGER Value Label/Meaning 1 diskSystemAlarmOn 2 diskSystemAlarmOff	ReadOnly	.1.3.6.1.4.1.46911.1.2.2.2	The current disk system alarm status. 0 indicates an unknown value.
diskSystemAlarmThreshold	UNSIGNED32	ReadWrite	.1.3.6.1.4.1.46911.1.2.2.3	Disk system usage threshold. When reached, a disk alarm is sent
diskSystemAlarmHysteresis	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.2.4	Disk system alarm hysteresis. Used in conjunction with threshold to stop the alarm when current disk volume is below abs (threshold - hysteresis).
diskUserVolumeCurrent	UNSIGNED32	ReadOnly	.1.3.6.1.4.1.46911.1.2.3.1	The current storage level of user disk volume expressed in percent of volume used.
diskUserAlarmState	INTEGER Value Label/Meaning 1 diskUserAlarmOn 2 diskUserAlarmOff	ReadOnly	.1.3.6.1.4.1.46911.1.2.3.2	The current disk user alarm status. 0 indicates an unknown value.
diskUserAlarmThreshold	UNSIGNED32	ReadWrite	.1.3.6.1.4.1.46911.1.2.3.3	Disk user usage threshold. When reached, a disk alarm is sent
diskUserAlarmHysteresis	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.3.4	Disk user alarm hysteresis. Used in conjunction with threshold to stop the alarm when user disk volume is below abs(threshold - hysteresis).
doorStateCurrent	INTEGER Value Label/Meaning 1 doorLocked 2 doorOpened	ReadOnly	.1.3.6.1.4.1.46911.1.2.4.1	The current door state.
doorThreshold	INTEGER32 Legal values: 0 .. 80000	ReadWrite	.1.3.6.1.4.1.46911.1.2.4.2	Threshold value in lux (illuminance) to detect that the door is opened.
gpsStatusCurrent	INTEGER Value Label/Meaning 1 gpsUnlocked 2 gpsLocked	ReadOnly	.1.3.6.1.4.1.46911.1.2.5.1	The current GPS status. 0 indicates an unknown value.
gpsThreshold	INTEGER32 Legal values: 0 .. 3600	ReadWrite	.1.3.6.1.4.1.46911.1.2.5.2	Threshold value in seconds to trigger a gps unlocked alarm.
ramCurrent	UNSIGNED32	ReadOnly	.1.3.6.1.4.1.46911.1.2.6.1	The current RAM level. Percent memory used expressed as a percentage. Value in the range [0; 100]
ramAlarmState	INTEGER Value Label/Meaning 1 ramAlarmOn 2 ramAlarmOff	ReadOnly	.1.3.6.1.4.1.46911.1.2.6.2	The current RAM alarm status. 0 indicates an unknown value.
ramAlarmThreshold	UNSIGNED32	ReadWrite	.1.3.6.1.4.1.46911.1.2.6.3	ram usage threshold. When reached, a ram alarm is sent
ramAlarmHysteresis	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.6.4	ram alarm hysteresis. Used in conjunction with threshold to stop the alarm when ram is below abs(threshold - hysteresis).
rssiCurrent	INTEGER32	ReadOnly	.1.3.6.1.4.1.46911.1.2.7.1	The current GSM RSSI level in dBm. Possible values are -113 dBm to -51 dBm. 0 to indicate not known or not detectable
rssiAlarmState	INTEGER Value Label/Meaning 1 rssiAlarmOn 2 rssiAlarmOff	ReadOnly	.1.3.6.1.4.1.46911.1.2.7.2	The current GSM RSSI alarm status. 0 indicates an unknown value.
rssiAlarmThreshold	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.7.3	rssi alarm threshold. When reached (rssi value below threshold), a rssi alarm is sent.
rssiAlarmHysteresis	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.7.4	rssi alarm hysteresis. Used in conjunction with threshold to stop the alarm when rssi value above (threshold + hysteresis).
temperatureCurrent	INTEGER32	ReadOnly	.1.3.6.1.4.1.46911.1.2.8.1	The current temperature in degrees Celsius.
temperatureAlarmState	INTEGER Value Label/Meaning 1 temperatureAlarmOn 2 temperatureAlarmOff	ReadOnly	.1.3.6.1.4.1.46911.1.2.8.2	The current temperature alarm status. 0 indicates an unknown value.
temperatureAlarmThreshold	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.8.3	temperature threshold. When reached, a temperature alarm is sent
temperatureAlarmHysteresis	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.1.2.8.4	temperature alarm hysteresis. Used in conjunction with threshold to stop the alarm when temperature below abs(threshold - hysteresis).
interfaceVersion	UNSIGNED32	ReadOnly	.1.3.6.1.4.1.46911.2	The current interface version.
serialNumber	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.3	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The serial number (EUI) used to uniquely identify a device.
wanCurrentInterface	INTEGER WanItfType (ENUM list below)	ReadOnly	.1.3.6.1.4.1.46911.4	Note: this object is based on the WanItfType TEXTUAL-CONVENTION. The current interface used by wan to communicate.
deviceType	OCTETSTR Legal Lengths: 1 .. 32 KerlinkDeviceTypeString	ReadOnly	.1.3.6.1.4.1.46911.5	Note: this object is based on the KerlinkDeviceTypeString TEXTUAL-CONVENTION. The current device type.
addressType	INTEGER InetAddressType (ENUM list below)	ReadWrite	.1.3.6.1.4.1.46911.10.1	Note: this object is based on the InetAddressType TEXTUAL-CONVENTION. Type of interface address (IPv4 or IPv6) to access to manager.
address	OCTETSTR Legal Lengths: 0 .. 255 InetAddress	ReadWrite	.1.3.6.1.4.1.46911.10.2	Note: this object is based on the InetAddress TEXTUAL-CONVENTION. IP or URL to access to manager.
managerPort	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.10.3	Port number on which the manager is listening. By default the value is 162
managerCommunity	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.10.4	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Community name used by manager when sending notifications (trap or inform)
agentPort	INTEGER32	ReadWrite	.1.3.6.1.4.1.46911.10.5	Port number on which agent is listening. By default the value is 161.
applyChanges	INTEGER Value Label/Meaning 1 apply	ReadWrite	.1.3.6.1.4.1.46911.10.6	Apply changes linked to management. When set to apply, SNMP agent saves its configuration and is restarted to take the changes into account.
installDate	OCTETSTR Legal Lengths: 19 .. 25 KerlinkDateTimeType	ReadWrite	.1.3.6.1.4.1.46911.11.1	Note: this object is based on the KerlinkDateTimeType TEXTUAL-CONVENTION. The installation date at which installation could start, expressed in ISO8601 format YYYY-MM-DDThh:mm:ssZ.
sourceFile	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.11.2	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The file needed by the update. The string is an URI which indicates the protocol, the address and the source filename.
updateTransactionId	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.11.3	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. updateTransactionId is used to identify uniquely the update
updateCommand	INTEGER Value Label/Meaning 1 apply 2 abort	ReadWrite	.1.3.6.1.4.1.46911.11.4	When set by the NMS, the agent executes the update (apply) or aborts it (abort).
updateStatus	INTEGER Value Label/Meaning 1 ready 2 downloading 3 paused 4 aborted 5 downloaded 6 installing 7 updated 8 failed	ReadOnly	.1.3.6.1.4.1.46911.11.5	The status of the update. 0 indicates an unknown value.
updateFailCause	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.11.6	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The reason why the update has failed.
sourceFileTransfer	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.12.1	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The file source to copy. The string is an URI which indicates the protocol, the address and the source filename.
destinationFileTransfer	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.12.2	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The file destination of the copy. The string indicates the folder and the destination filename.
direction	INTEGER Value Label/Meaning 1 upload 2 download	ReadWrite	.1.3.6.1.4.1.46911.12.3	The direction of the copy. upload indicates copy from agent to server. download indicates copy from server to agent.
copyTransactionId	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.12.4	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. copyTransactionId is used to identify uniquely the file transfer
copyCommand	INTEGER Value Label/Meaning 1 apply 2 abort	ReadWrite	.1.3.6.1.4.1.46911.12.5	When set by the NMS, the agent executes the file transfer (apply) or aborts it (abort).
copyStatus	INTEGER Value Label/Meaning 1 ready 2 running 3 succeeded 4 aborted 5 failed	ReadOnly	.1.3.6.1.4.1.46911.12.6	The status of the file transfer. 0 indicates an unknown value.
copyFailCause	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.12.7	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The reason why the file transfer has failed.
input	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.14.1	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The input string of the command to execute.
output	OPAQUE Legal values: 1 .. 65535 KerlinkBlobOpaque	ReadOnly	.1.3.6.1.4.1.46911.14.2	Note: this object is based on the KerlinkBlobOpaque TEXTUAL-CONVENTION. The result of the executed command.
commandTransactionId	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.14.3	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. commandTransactionId is used to identify uniquely the command.
command	INTEGER Value Label/Meaning 1 apply 2 abort	ReadWrite	.1.3.6.1.4.1.46911.14.4	When set by the NMS, the agent executes the command (apply) or aborts it (abort).
commandStatus	INTEGER Value Label/Meaning 1 ready 2 running 3 succeeded 4 aborted 5 failed	ReadOnly	.1.3.6.1.4.1.46911.14.5	The status of the command. 0 indicates an unknown value.
commandFailCause	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.14.6	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The reason why the command has failed.
hashVersions	OPAQUE Legal values: 1 .. 16	ReadOnly	.1.3.6.1.4.1.46911.50.1.1	Hash value computed on versions data. The manager can check this value and decide to fetch all versions data.
versionsNumber	INTEGER32	ReadOnly	.1.3.6.1.4.1.46911.50.1.2	The number of versions of the components present on this system.
uidVersions	OPAQUE Legal values: 1 .. 16	ReadOnly	.1.3.6.1.4.1.46911.50.1.500	Unique identifier of versions. This value is changed after a change of version.
bootCause	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.50.2	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The boot cause.
location	INTEGER32	ReadOnly	.1.3.6.1.4.1.46911.50.12.1	Location of the wan module inside the container
gsmType	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.50.12.2.1	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. A textual string containing information about the GSM component. NA if GSM component is not present.
gsmDescr	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.50.12.2.2	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. A textual string containing version information about the GSM. This string should include the name of the GSM module, the version of the firmware. NA if GSM component is not present.
imei	OCTETSTR Legal Lengths: 0 .. 16 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.50.12.2.3	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. A textual string containing International Mobile Equipment Identifier (IMEI), a unique 15 or 17 digits code used to uniquely identify mobile devices. NA if GSM component is not present.
iccId	OCTETSTR Legal Lengths: 0 .. 19 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.50.12.2.4	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. A textual string containing Integrated Circuit Card Identifier (ICCID), a unique 19 or 20 characters code defined by the ITU-T recommendation E.118 as the Primary Account Number. NA if GSM component is not present.
wlanType	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.50.12.3.1	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. A textual string containing information about the WLAN component. NA if WLAN component is not present.
firmwareDescr	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	.1.3.6.1.4.1.46911.50.12.3.2	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. A textual string containing the firmware version information about the wireless lan module. NA if WLAN component is not present.
modulesNumber	INTEGER32	ReadOnly	.1.3.6.1.4.1.46911.50.13.1	This object indicates the number of lan radio modules integrated into the station.
hashConfiguration	OPAQUE Legal values: 1 .. 16	ReadOnly	.1.3.6.1.4.1.46911.50.14.1	Hash value computed on configuration data. The manager can check this value and decide to fetch all configuration data.
rollbackTmoMn	UNSIGNED32 Legal values: 0 .. 1440	ReadWrite	.1.3.6.1.4.1.46911.50.14.2.1	The number of minutes to rollback after losing WAN connectivity following a configuration.
statsPeriod	UNSIGNED32 Legal values: 1 .. 24	ReadWrite	.1.3.6.1.4.1.46911.50.14.2.2	Statistics Period of time. The statistics are produced over this period of time
configRadio	OPAQUE Legal values: 1 .. 65535 KerlinkBlobOpaque	ReadWrite	.1.3.6.1.4.1.46911.50.14.3.1	Note: this object is based on the KerlinkBlobOpaque TEXTUAL-CONVENTION. Radio configuration file content.
pwrThreshold	INTEGER32 Legal values: -255 .. 255	ReadWrite	.1.3.6.1.4.1.46911.50.14.3.2.1	Threshold of signal power.
durationThreshold	UNSIGNED32 Legal values: 1 .. 86400	ReadWrite	.1.3.6.1.4.1.46911.50.14.3.2.2	Minimal duration of signal presence (in seconds).
sourceAux	INTEGER Value Label/Meaning 1 ntp 2 ptp	ReadWrite	.1.3.6.1.4.1.46911.50.14.4.1	Auxiliary source used to synchronize time on the platform.
periodResolution	INTEGER Value Label/Meaning 4 pr16sec 6 pr1min 10 pr17min 12 pr1hour 15 pr9hour 16 pr18hour 17 pr36hour	ReadWrite	.1.3.6.1.4.1.46911.50.14.4.2.1	Period (in secondes, minutes or hours) between two NTP requests.
ntp1	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.50.14.4.2.2	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Primary NTP server address.
ntp2	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.50.14.4.2.3	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Secondary NTP server address.
ptpMaster	INTEGER TruthValue (ENUM list below)	ReadWrite	.1.3.6.1.4.1.46911.50.14.4.3	Note: this object is based on the TruthValue TEXTUAL-CONVENTION. Indicate if the device is source of PTP time.
configVpn	OPAQUE Legal values: 1 .. 65535 KerlinkBlobOpaque	ReadWrite	.1.3.6.1.4.1.46911.50.14.5.1	Note: this object is based on the KerlinkBlobOpaque TEXTUAL-CONVENTION. VPN configuration file content.
dhcp	INTEGER TruthValue (ENUM list below)	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.3.1	Note: this object is based on the TruthValue TEXTUAL-CONVENTION. True indicates DHCP server is used to obtain eth address.
defaultIp	IPADDR	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.3.2	If dhcp is false, indicates IP address to use (format: xxx.xxx.xxx.xxx).
defaultNetmask	IPADDR	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.3.3	If dhcp is false, indicates netmask to use (format ex.: 255.255.255.0).
defaultGateway	IPADDR	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.3.4	If dhcp is false, indicates gateway address to use (format: xxx.xxx.xxx.xxx).
dns1	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.3.5	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Domain Name Server #1 to use
dns2	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.3.6	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Domain Name Server #2 to use
ssid	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.4.1	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Wireless network SSID.
mode	INTEGER Value Label/Meaning 1 wep 2 wpa	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.4.2	Wireless network security mode: WEP or WPA. 0 indicates an unknown value.
passwordWlan	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	.1.3.6.1.4.1.46911.50.14.6.4.3	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Wireless network password to use.
uidConfiguration	OPAQUE Legal values: 1 .. 16	ReadOnly	.1.3.6.1.4.1.46911.50.14.500	Unique identifier of configuration. This value is changed after a change of configuration.
statisticsList	OCTETSTR Legal Lengths: 1 .. 1024 KerlinkListString	ReadOnly	.1.3.6.1.4.1.46911.50.15.1	Note: this object is based on the KerlinkListString TEXTUAL-CONVENTION. List of available statistics

TABLE OBJECTS

Table spectrumsTable

Table Name	spectrumsTable
In MIB	KERLINK-WMC-MIB
Registered at OID	.1.3.6.1.4.1.46911.13.1
Table Description	The table identifying spectrum analysis.
Row Description	An entry containing a specific spectrum analysis.

spectrumsTable Indexes:

Name	Type	Access	Description
modemIndex	UNSIGNED32 Legal values: 1 .. 8 SpectrumsModemIndex	ReadOnly	Note: this object is based on the SpectrumsModemIndex TEXTUAL-CONVENTION. The index value that uniquely identifies the spectrum analysis to which this entry is applicable.

Other spectrumsTable Columns:

Name	Type	Access	Description
duration	UNSIGNED32	ReadWrite	The duration (in seconds) to use to perform the spectral analysis.
destinationFilename	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The file destination of the spectral analysis. The string indicates an URI which identifies the address, the folder and the destination filename.
modemSerialNumber	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The serial number of the modem linked to the spectral analysis. The string identifies uniquely the modem.
spectrumTransactionId	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadWrite	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. spectrumTransactionId is used to identify uniquely the spectral analysis
spectrumCommand	INTEGER SpectrumAnalysisCommand (ENUM list below)	ReadWrite	Note: this object is based on the SpectrumAnalysisCommand TEXTUAL-CONVENTION. When set by the NMS, the agent executes the spectral analysis (apply) or aborts it (abort)
spectrumStatus	INTEGER SpectrumAnalysisStatus (ENUM list below)	ReadOnly	Note: this object is based on the SpectrumAnalysisStatus TEXTUAL-CONVENTION. The status of the spectral analysis. 0 indicates an unknown value.
spectrumFailCause	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. The reason why the spectral analysis has failed.

Table versionsTable

Table Name	versionsTable
In MIB	KERLINK-WMC-MIB
Registered at OID	.1.3.6.1.4.1.46911.50.1.3
Table Description	The table containing software and hardware versions.
Row Description	An entry containing software/hardware versions.

versionsTable Indexes:

Name	Type	Access	Description
versionIndex	INTEGER32 Legal values: 1 .. 15 LoraVersionIndex	NoAccess	Note: this object is based on the LoraVersionIndex TEXTUAL-CONVENTION. The index value that uniquely identifies the version to which this entry is applicable.

Other versionsTable Columns:

Name	Type	Access	Description
versionDescr	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. A textual string containing version information about the component. This string should include the name of the component, the version of the interface hardware/software.

Table lanRadiosTable

Table Name	lanRadiosTable
In MIB	KERLINK-WMC-MIB
Registered at OID	.1.3.6.1.4.1.46911.50.13.2
Table Description	The table containing Lan radio information.
Row Description	An entry containing software/hardware versions.

lanRadiosTable Indexes:

Name	Type	Access	Description
lanRadioIndex	INTEGER32 Legal values: 1 .. 8 LoraLanRadioIndex	NoAccess	Note: this object is based on the LoraLanRadioIndex TEXTUAL-CONVENTION. The index value that uniquely identifies the lan radio to which this entry is applicable.

Other lanRadiosTable Columns:

Name	Type	Access	Description
lanRadioId	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Identifies a modem. The value is in hexadecimal format
lanRadioType	INTEGER LoraLanType (ENUM list below)	ReadOnly	Note: this object is based on the LoraLanType TEXTUAL-CONVENTION. Type of a modem. 0 indicates an unknown value.
lanRadioLocation	INTEGER32	ReadOnly	Location of the modem inside the container.
lanRadioHwVersion	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Hardware version of the modem (format: [0-100].[0-100]).
lanRadioFrontRfHwVersion	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Hardware version of the RF front of the modem (format: [0-100].[0-100]).
lanRadioSwVersion	OCTETSTR Legal Lengths: 0 .. 255 DisplayString	ReadOnly	Note: this object is based on the DisplayString TEXTUAL-CONVENTION. Software version of the modem (format: [0-100].[0-100]).
lanRadioAntennaNumber	INTEGER32	ReadOnly	Number of antenna connectors.
lanRadioRfFrontInputPathNumber	INTEGER32	ReadOnly	Number of radio input paths at RF front.
lanRadioCentralFrequency	INTEGER32	ReadOnly	Central frequency in Hz.
lanRadioRfPathNumber	INTEGER32	ReadOnly	Number of radio paths.
lanRadioPathWidth	INTEGER32	ReadOnly	Width of radio path in kHz.
lanRadioMinTxFrequency	INTEGER32	ReadOnly	Min frequency in Hz on TX path.
lanRadioMaxTxFrequency	INTEGER32	ReadOnly	Max frequency in Hz on TX path.
lanRadioMinRxFrequency	INTEGER32	ReadOnly	Min frequency in Hz on RX path.
lanRadioMaxRxFrequency	INTEGER32	ReadOnly	Max frequency in Hz on RX path.

Table wanInterfacesPriorityTable

Table Name	wanInterfacesPriorityTable
In MIB	KERLINK-WMC-MIB
Registered at OID	.1.3.6.1.4.1.46911.50.14.6.1
Table Description	The table containing WAN interfaces by order of priority.
Row Description	An entry containing wan interface.

wanInterfacesPriorityTable Indexes:

Name	Type	Access	Description
wanInterfaceIndex	INTEGER32 Legal values: 1 .. 3 WanItfIndex	ReadOnly	Note: this object is based on the WanItfIndex TEXTUAL-CONVENTION. The index value that uniquely identifies the interface to which this entry is applicable.

Other wanInterfacesPriorityTable Columns:

Name	Type	Access	Description
wanInterfaceType	INTEGER WanItfType (ENUM list below)	ReadWrite	Note: this object is based on the WanItfType TEXTUAL-CONVENTION. The type of interface.

Table operatorTable

Table Name	operatorTable
In MIB	KERLINK-WMC-MIB
Registered at OID	.1.3.6.1.4.1.46911.50.14.6.2.5
Table Description	The table containing combinations of MCC/MNC tuple which uniquely identify a mobile network operator.
Row Description	An entry containing operator information.

operatorTable Indexes:

Name	Type	Access	Description
operatorIndex	INTEGER32 Legal values: 1 .. 10 OperatorTableIndex	ReadOnly	Note: this object is based on the OperatorTableIndex TEXTUAL-CONVENTION. The index value that uniquely identifies the operator to which this entry is applicable.

Other operatorTable Columns:

Name	Type	Access	Description
operatorMCC	OCTETSTR Legal Lengths: 0 .. 3 OperatorString	ReadWrite	Note: this object is based on the OperatorString TEXTUAL-CONVENTION. Mobile Country Code (MCC) of the operator.
operatorMNC	OCTETSTR Legal Lengths: 0 .. 3 OperatorString	ReadWrite	Note: this object is based on the OperatorString TEXTUAL-CONVENTION. Mobile Network Code (MNC) of the operator.
operatorAPN	OCTETSTR Legal Lengths: 0 .. 64 KerlinkIdentificationString	ReadWrite	Note: this object is based on the KerlinkIdentificationString TEXTUAL-CONVENTION. Access Point Name (APN) to use.
operatorLogin	OCTETSTR Legal Lengths: 0 .. 64 KerlinkIdentificationString	ReadWrite	Note: this object is based on the KerlinkIdentificationString TEXTUAL-CONVENTION. Login of Packet Data Protocol (PDP) context to use.
operatorPassword	OCTETSTR Legal Lengths: 0 .. 64 KerlinkIdentificationString	ReadWrite	Note: this object is based on the KerlinkIdentificationString TEXTUAL-CONVENTION. Password of Packet Data Protocol (PDP) context to use.

Table statisticsTable

Table Name	statisticsTable
In MIB	KERLINK-WMC-MIB
Registered at OID	.1.3.6.1.4.1.46911.50.15.2
Table Description	The table containing statistics.
Row Description	An entry containing statistics.

statisticsTable Indexes:

Name	Type	Access	Description
statisticIndex	INTEGER32 Legal values: 1 .. 24 StatisticsIndex	NoAccess	Note: this object is based on the StatisticsIndex TEXTUAL-CONVENTION. The index value that uniquely identifies the statistics to which this entry is applicable.

Other statisticsTable Columns:

Name	Type	Access	Description
statisticSlot	OPAQUE Legal values: 1 .. 65535 KerlinkBlobOpaque	ReadOnly	Note: this object is based on the KerlinkBlobOpaque TEXTUAL-CONVENTION. Statistics produced over a period of time.

DEPRECATED OR OBSOLETE OR HISTORIC OBJECTS

NOTIFICATIONS

TEXTUAL CONVENTIONS

These TEXTUAL-CONVENTIONS are used in other parts of the document above. They are SNMP's way of defining a datatype that is used repeatedly by other MIB objects. Any implementation implementing objects that use one of these definitions must follow its DESCRIPTION clause as well as the DESCRIPTION clause of the object itself.

Name	Type	Description
SpectrumAnalysisStatus	INTEGER Value Label/Meaning 1 ready 2 running 3 succeeded 4 aborted 5 failed	Status of spectrum analysis.
KerlinkBlobOpaque	OPAQUE	Type of opaque representing blob.
KerlinkIdentificationString	OCTETSTR	Type of string used for identification.
DisplayString	OCTETSTR	Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length.
WanItfIndex	INTEGER32	A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1.
LoraLanRadioIndex	INTEGER32	A unique value, greater than zero, for each component version. It is recommended that values are assigned contiguously starting from 1.
InetAddress	OCTETSTR	Denotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType object that provides the context. It is suggested that the InetAddressType object be logically registered before the object(s) that use the InetAddress textual convention, if they appear in the same logical row. The value of an InetAddress object must always be consistent with the value of the associated InetAddressType object. Attempts to set an InetAddress object to a value inconsistent with the associated InetAddressType must fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate.
OperatorString	OCTETSTR	Type of string used for operator codes.
StatisticsIndex	INTEGER32	A unique value, greater than zero, for each bulk of statistics.
OperatorTableIndex	INTEGER32	A unique value, greater than zero, for each (MCC, MNC) tuple. It is recommended that values are assigned contiguously starting from 1.
LoraLanType	INTEGER Value Label/Meaning 1 type169or868 2 typeLoraMono 3 typeLoraDual 4 typeLoraLoc 5 typeLoraLocFdx	Type of radio.
SpectrumAnalysisCommand	INTEGER Value Label/Meaning 1 apply 2 abort	Spectrum analysis command. apply starts the analysis. abort stops the analysis.
KerlinkListString	OCTETSTR	Type of string representing list of periods.
KerlinkDeviceTypeString	OCTETSTR	Type of string representing device type.
TruthValue	INTEGER Value Label/Meaning 1 true 2 false	Represents a boolean value.
KerlinkDateTimeType	OCTETSTR	Type of string representing datetime formatted as ISO8601.
SpectrumsModemIndex	UNSIGNED32	The modem index used to perform the spectral analysis. A unique value, greater than zero, for each component version. It is recommended that values are assigned contiguously starting from 1.
WanItfType	INTEGER Value Label/Meaning 1 typeGsm 2 typeEthernet 3 typeWlan	Type of interface.
LoraVersionIndex	INTEGER32	A unique value, greater than zero, for each component version. It is recommended that values are assigned contiguously starting from 1.
InetAddressType	INTEGER Value Label/Meaning 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns	A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address that is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. To support future extensions, the InetAddressType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that InetAddressType objects and any dependent objects (e.g., InetAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change an InetAddressType object would, for example, lead to an undefined InetAddress value. In particular, InetAddressType/InetAddress pairs must be changed together if the address type changes (e.g., from ipv6(2) to ipv4(1)).

TREE VIEW

Tree view generated by running: snmptranslate -Tp KERLINK-WMC-PUBLIC-MIB::kerlink