Differences

This shows you the differences between two versions of the page.

--- wiki:data_transmission [2017/10/17 11:10]
mpe
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Data transmission ======
-Data can be send to endpoint devices. It can be achieved using the web interface from the //Send data// menu.
-The web interface only displays the last message send.
-The web interface displays all the queued messages.
-===== class A communication =====
-"Following each uplink transmission the end-device opens two short receive windows. The receive window start times are defined using the end of the transmission as a reference."
-"If the network intends to transmit a downlink to an end-device, it will always initiate the transmission precisely at the beginning of one of those two receive windows."
-{{:wiki:class_a_transmition.png?450nolink|}}
-//Extract from the LoRaWan Specification ([[https://www.lora-alliance.org/ |LoRa-alliance]])//
-===== class C communication =====
-"Class C devices implement the same two receive windows as Class A devices, but they do not close RX2 window until they need to send again. Therefore they may receive a downlink in the RX2 window at nearly any time, including downlinks sent for the purpose of MAC command or ACK transmission. A short listening window on RX2 frequency and data rate is also opened between the end of the transmission and the beginning of the RX1 receive window."
-{{:wiki:class_c_transmition.png?600nolink|}}
-//Extract from the LoRaWan Specification ([[https://www.lora-alliance.org/ |LoRa-alliance]])//

Wanesy™ SPN (End Of Life)