Differences

This shows you the differences between two versions of the page.

--- wiki:remote_ftp [2020/02/21 11:53]
127.0.0.1 external edit
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Remote FTP ======
-===== Introduction =====
-The remote FTP service is a FTP client used to periodically push data to an external FTP server. Its configuration is available in the //Remote FTP// tab under the //Services// menu.
-{{ :images:reftp_config.png?500 |}}
-The FTP client periodically pushes CSV files with the received data. These CSV files are stored on the gateway. \\
-The first time SPN reaches the remote FTP server, all the stored CSV files are uploaded to the server and are then deleted from SPN. After that, the CSV files are uploaded/deleted at each beginning of hour/day/week/month.
-The //Received data backup// panel is used to configure how many and how often new CSV files are generated and how often they are uploaded to the server.
-{{ :images:receivedatabackup.png?500 |}}
-===== Remote FTP connection =====
-The //Remote FTP// panel is used to configure the access to the FTP server.
-  - Make sure that the ''Enable'' check box is **checked**.
-  - In the ''Host'' field, set the //IP address// or //hostname// of the FTP server.
-  - In the ''Port'' field, set the port of the remote ftp (default: ''21'').
-  - In the ''User'' and ''Password'' fields, set the username and password of the remote ftp server. To connect as anonymous user, the ''user'' field must be field with ''anonymous'' and the ''Password'' fields needs to be empty.
-  - In the ''Directory'' field, set the remote path where you want to save the files (must start and end with a ''/'' symbol, default is ''/'').
-<note warning>
-On version v1.1.1, a reboot is needed to apply the port configuration.
-</note>

Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Differences

Page Tools