Differences

This shows you the differences between two versions of the page.

--- wiki:webui:configuration:multi_gateways [2020/03/13 15:37]
ghi created
+++ wiki:webui:configuration:multi_gateways [2021/09/21 10:58] (current)
tda
@@ Line 31: / Line 31: @@
 ===== Slave configuration =====
+\\
+==== GSM configuration ====
+**No public IP address assignment** is required for slave gateways. You can use any SIM card that is using **fixed/static IP addressing**. \\
+In case of using standard SIM cards without the fixed/static IP addrressing, you have to set a secure channel between the slave gateway and the master gateway.
+See the OpenVPN section to achieve this.
+\\
+\\
 ==== Wanesy SPN gateway ====
@@ Line 55: / Line 64: @@
 </note>
-Consult [[https://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:lora:cpf_1.1.x:cpf_1.1.6:installation|CPF installation and configuration]] for more details.
+Consult [[https://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:lora:cpf|CPF installation and configuration]] for more details.
 ==== Wirnet Station ====
@@ Line 77: / Line 86: @@
 If the ''packets forwarding'' feature is enabled then the gateway will act as a slave (even though other gateways are registered). Make sure to disable it.
+==== GSM configuration ====
+<note important>
+It is mandatory to use a **fixed/static IP SIM card with public IP address assignment** to enable the slaves to forward correctly the LoRa packets to the Master gateway.
+</note>
 ==== Adding a gateway ====
@@ Line 97: / Line 112: @@
 The gateways can be removed from this section.
-{{.:..:gateways.png|}
+{{.:..:gateways.png|}}

Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Differences

Page Tools