Wanesy™ SPN (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Node-RED ======

===== Introduction =====

Its configuration is available in ''Configuration => Interfaces => Node-RED'' menu.

{{.:noren.png?600|Node-RED}}


Login details for the connection : spn / spnpwd


===== Help =====

Inline help is available in web user interface in ''Configuration => Interfaces => Node-RED => Help''

An extract of this help is available below:

<hidden>
<markdown>
# Common parameters

**SPN** nodes are available in Node-RED nodes menu (**subflows** category).

# Flow syntax

## Rx data flow

**Get Rx data:**

- **SPN/Rx data** node usage is available on node help or description.

## Tx data flow

**Add Tx data:**

- **SPN/Tx data** node usage is available on node help or description.
</markdown>
</hidden>

===== Node examples =====

The following nodes are given as examples to display Rx data and inject manually Tx data.

==== Rx data debugger ====

This node can be plugged directly to ''SPN/Rx data'' node. Once Node-RED enabled and user connected to Node-RED interface, click on ''Node-RED menu => Import => Clipboard'' and paste the following node:

<code json RxDataDebugger.json>
[{"id":"fc15a665.e0b748","type":"subflow","name":"Rx data debugger","info":"","category":"","in":[{"x":70,"y":85,"wires":[{"id":"a11a953c.82f618"}]}],"out":[]},{"id":"a11a953c.82f618","type":"debug","z":"fc15a665.e0b748","name":"Display Rx data on console","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"rx_data","x":288,"y":85,"wires":[]},{"id":"38377a02.373716","type":"subflow:fc15a665.e0b748","z":"e311c66a.1eb5e8","name":"","x":264,"y":435,"wires":[]}]
</code>

  * Connect ''SPN/Rx data'' output to ''Rx data debugger'' input
  * Click on ''Deploy''
  * Rx data can be visible on ''debug'' console.

{{.:noren_rx_data_debugger.png|Node-RED, Rx data debugger}}

==== Tx data injector ====

This node can be used to inject manually a Tx data. Then, this Tx data is sent to the expected end-device. Once Node-RED enabled and user connected to Node-RED interface, click on Node-RED menu ⇒ Import ⇒ Clipboard and paste the following node:

<code json TxDataInjector.json>
[{"id":"e1c67d2e.50814","type":"inject","z":"1c9fa2a7.f4dc5d","name":"Manual Tx data injection","topic":"","payload":"","payloadType":"date","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":230,"y":540,"wires":[["7c3efe6a.0bb38"]]},{"id":"7c3efe6a.0bb38","type":"change","z":"1c9fa2a7.f4dc5d","name":"Build Tx data","rules":[{"t":"set","p":"tx_data.end_device_id","pt":"msg","to":"AABBCCDD","tot":"str"},{"t":"set","p":"tx_data.port","pt":"msg","to":"2","tot":"num"},{"t":"set","p":"tx_data.acknowledge","pt":"msg","to":"true","tot":"bool"},{"t":"set","p":"tx_data.try_number","pt":"msg","to":"5","tot":"num"},{"t":"set","p":"tx_data.payload","pt":"msg","to":"wMrA/sDKwP7AysD+","tot":"str"},{"t":"delete","p":"topic","pt":"msg"},{"t":"delete","p":"payload","pt":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":483,"y":540,"wires":[[]]}]
</code>

  * Connect ''Build Tx data'' output to ''SPN/Tx data'' input
  * Edit ''Build Tx data'' node to set **5** node properties (End-device ID, port, acknowledge, try number and payload)
  * Click on ''Deploy''
  * Tx data are injected each time ''Manual Tx data injection'' button is clicked

{{.:noren_tx_data_injector.png|Node-RED, Tx data injector}}

<note tip>
In web user interface, it is possible to check in ''Fleet => Send data => Tx data'' that the Tx data injected is available in Tx data list.
</note>

===== Node installation and updates =====

It is possible to install new nodes and update already installed nodes through Node-RED interface in ''Main menu => Manage palette''.

<note important>Because of hardware limitations, Node-RED nodes update or installation may fail for various reasons (dependency issues, prebuilt package unavailable)</note>
Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Page Tools
