Wanesy™ SPN (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Local FTP features of firmware 1.1.1 ======

<note important>In this page, “XXXXXX” represents the __6__ digits at the end of hostname/board id (upper case).
</note>

===== FTP filesystem structure ===== 

The FTP filesystem structure is the following: \\
{{:images:localftpstructure.png?100|}}
===== Send and receive data =====

==== RX data ====
{{ :images:get_rx_data.png?150|}}
Retrieve RX data process needs to be triggered by the user. The process is triggered by putting an empty file ''get_rx_data'' in the ''rx_data'' folder on the FTP server. \\
It will create a file ''rx_data/XXXXXX_get_rx_data_processed'' once the request is taken into account. \\
The request only works if file ''rx_data/XXXXXX_get_rx_data_processed'' does not exist. \\

==== TX data ====
{{ :images:add_tx_data.png?150|}}
Send TX data process needs to be triggered by the user. The process is triggered by putting 2 files in the ''tx_data'' folder on the FTP server:

  - A CSV file named ''XXXXXX_tx_data.csv''. The file contains the data to be transmited. The CSV file format is the same than those used by [[wiki:data_transmission#drag_and_drop_a_csv_file|web interface]]. Put this file first on the server.
  - An empty file ''add_tx_data''.

It will create a file ''tx_data/XXXXXX_add_tx_data_processed'' once the request is taken into account. \\
The request only works if file ''tx_data/XXXXXX_add_tx_data_processed'' does not exist. \\

===== Configure the gateway =====

Set/Get gateway configuration process needs to be triggered by the user. \\

==== Get configuration ====
{{ :images:localftp_getconfig.png?150|}}
The process is triggered by putting an empty file ''get_configuration'' in the ''configuration'' folder on the FTP server. \\
It will create a file ''configuration/XXXXXX_get_configuration_processed'' once the request is taken into account. \\
The request only works if file ''configuration/XXXXXX_get_configuration_processed'' does not exist. \\

==== Set configuration ====
{{ :images:localftp_setconfig.png?150|}}
The process is triggered by putting 2 files in the ''configuration'' folder on the FTP server:

  - A CSV file named ''XXXXXX_data.json''. The file contents the gateway configuration. More information on the file format is available [[wiki:data_json|here]]. Put this file first on the server.  
  - An empty file ''set_configuration''. 

It will create a file ''configuration/XXXXXX_set_configuration_processed'' once the request is taken into account. \\
The request only works if file ''configuration/XXXXXX_set_configuration_processed'' does not exist. Put this file first on the server.\\

===== Manage the fleet =====

Manage fleet process need to be triggered by the user. \\

==== Get fleet ====
{{ :images:localftp_getfleet.png?150|}}
The process is triggered by putting an empty file ''get_fleet'' in the fleet folder on the FTP server. \\
It will create a file ''fleet/XXXXXX_get_fleet_processed'' once the request is taken into account. \\
The request only works if file ''fleet/XXXXXX_get_fleet_processed'' does not exist. \\

==== Add fleet ====
{{ :images:localftp_addfleet.png?150}}
The process is triggered by putting 2 files in the ''fleet'' folder on the FTP server:

  - A CSV file named ''XXXXXX_fleet.csv''. The file contents the fleet description. More information on the file format is available [[wiki:gateway_configuration##import_a_fleet_with_a_csv_file|here]]. Put this file first on the server.
  - An empty file ''add_fleet''. 

It will create a file ''fleet/XXXXXX_set_fleet_processed'' once the request is taken into account. \\
The request only works if file ''fleet/XXXXXX_set_fleet_processed'' does not exist. \\

===== Update the gateway =====

Update FTP folder allows users to update the gateway software, restore the software to the default configuration and reboot the gateway.
These processes need to be triggered by the user. \\

==== Update ====
{{ :images:localftpupdate.png?150|}}
The process is triggered by putting 2 files in the ''update'' folder on the FTP server:
  - keros_X.X.X-spn_klk-wifc.ipk file available in the [[wiki:resources#spn_firmware_to_install_spn|resources]] page. Put this file first on the server.
  - An empty file ''update''.

It will create a file ''update/XXXXXX_update_processed'' once the request is taken into account. \\
The request only works if file ''update/XXXXXX_update_processed'' does not exist. \\
Update will be taken into account after a reboot.

==== Restore ====

The process is triggered by putting an empty file ''restore'' in the ''update'' folder on the FTP server. \\
It will create a file ''update/XXXXXX_restore_processed'' once the request is taken into account. \\
The request only works if file ''update/XXXXXX_restore_processed'' does not exist. \\
Restore will be taken into account after a reboot

<note important>
You will need an access to web interface to enable the FTP server and put your license file.
</note>

==== Reboot ====
{{ :images:localftpreboot.png?150|}}
The process is triggered by putting an empty file ''reboot'' in the ''update'' folder on the FTP server. \\
It will create a file ''update/XXXXXX_reboot_processed'' once the request is taken into account. \\
The request only works if file ''update/XXXXXX_reboot_processed'' does not exist. \\

===== Logs ===== 
{{ :images:localftp_log.png?150|}}
The process is triggered by putting an empty file ''get_log'' in the ''configuration'' folder on the FTP server. \\
It will create a file ''log/XXXXXX_get_log_processed'' once the request is taken into account. \\
The request only works if file ''log/XXXXXX_get_log_processed'' does not exist. \\
Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Page Tools
