Wanesy™ SPN (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== SPN firmware v2.3.2 (September 2021) ======

===== Changes from 2.2.2 =====



==== New features ====

  * Add possibility to disable NewChannelReq/LinkADRReq MAC commands




==== Bug fixes ====

  * [Node RED] Flows stopped due to missing node types zeromq In/Out **Warning:** the issue with ZeroMQ node is fixed but it may fail again for various reasons (dependency issues, prebuilt package unavailable) when updating or installing another node.
  * [Lora]:By default, Tx power is not correct 
  * [Lora]:Default RX2 data rates is not correct for AS923
  * [Lora]:No more uplink data from end device once 1st NewChannelReq/LinkADRReq sent
  * [Lora]:SPN LNS has an issue with ACK field management on LinkCheckAns: 6 attempts
  * [Lora]:Downlink ACKs don't work in AU915 with confirmed uplinks
  * [Lora]:Sometimes, LinkADRReq is sent several times in a raw

==== Restrictions (In addittion to these of SPN 2.2.2) ====

  * [Lora]:No LinkADRReq sent with MAC Command disabled but ADR enabled in US915 (and possibly in AU915)
  * [Lora]:FCnt Down are not increasing linearly when MAC command enabled
  * [Lora]:Force RX2 window in KR920 & IN865 does not work
  * [Lora]:First DataDown is not sent properly in ClassC
  * [Lora]:Impossible to send DataDown after the first uplink
  * [Lora]:Channel mask is not correct when no channel management
  * [Lora]:MonoSF channel is not set in ChMask

===== Compatibility =====

==== Hardware ====

  * This firmware can be used on several Kerlink products:

    iFemtoCell (serial number: 0x39XXXXXX (868), 0x44XXXXXX (915), 0x45XXXXXX (923))
    iStation (all versions except V1A) (serial number: 0x54XXXXXX (923), 0x55XXXXXX (915), 0x56XXXXXX (868))
    iFemtoCell Evolution (serial number: 0x64XXXXXX (868), 0x65XXXXXX (915), 0x66XXXXXX (923))

==== Software ====

^ Gateway model                   ^ KerOS firmware version ^ SPN firwmare version ^
| **Wirnet iFemtoCell**           | From 3.3.3             | 2.0.3                |
| **Wirnet iStation**             | From 4.x.x             | 2.1.2                |
| **Wirnet iFemtoCell-evolution** | From 4.x.x             | 2.1.2                |

==== LoRaWAN ====

  * Compatible with LoRaWAN Specification V1.0.2
  * Compatible with LoRaWAN Regional Parameters V1.1

===== Download =====


__OPKG package and GPG signed to upgrade from 2.0.3 and keep SPN data/configuration:__\\
{{.:fwupgrade_2.3.2-spn_klk-wifc.ipk.gpg}} md5: ''8546dee6f19773942987a83f12ec7559''.

__OPKG package and GPG signed to upgrade from 2.0.3 but without keeping the SPN data/configuration:__\\
{{.:liveburner_2.3.2-spn_klk-wifc.ipk.gpg}} md5: ''151bd4c28a3846c1560132db7fbf1673''.

__OPKG package to upgrade from 2.1.2 and keep SPN data/configuration:__\\
{{.:keros_2.3.2-spn_klkgw-signed.ipk}} md5: ''58b1a876ccaaa76560b8b8a41a45f43d''.

__OPKG package to install from a KerOS firmware or upgrade from 2.1.2 without keeping the SPN data/configuration:__\\
{{.:liveburner_2.3.2-spn_klkgw-signed.ipk}} md5: ''b0ef37ae771b2e4c00af994e8b1f3290''.



**To check MD5 you can use Powershell command below :**

//Get-FileHash keros_2.3.2-spn_klkgw-signed.ipk -Algorithm MD5 //
Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Page Tools
