Wanesy™ SPN (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======= iFemtoCell SPN firmware v2.0.3 (April 2018) ======

<note warning>**__Breaking of compatibility__: license files**\\

Due to the evolution of Wanesy SPN V2 software, licensing management modification leads to a break of compatibility with the license management of Wanesy SPN V1.

Wirnet iFemtoCell Wanesy SPN firmware **v2** must only be activated by a valid Wanesy SPN V2 license file.

Wanesy SPN license file provided with SPN version V1 will not allow to run the Wanesy SPN **v2** version, even if the V2 firmware can be installed (locked waiting V2 license).

Please contact [[ sales@kerlink.com |sales@kerlink.com ]] to order SPN V2 licenses before upgrading to Wirnet iFemtoCell SPN firmware **v2**.

License files SPN V2 are not compatible with Wirnet iFemtoCell SPN firmware V1 (v1.0.3 and V1.1.1).  </note>

===== Changes from 1.1.1 =====

==== New features =====

  * [LoRa] Listen Before Talk (LBT) for Japan and Korea.
  * [Multi-gateways]: SPN can now receive/send LoRa frames from/to other SPN iFemtoCell, Wirnet station and Wirnet iBTS.
  * [SMS interface]: New interface to : get Rx data, add Tx data, manage configuration, manage end-devices, update interface activation, manage gateways, get status, update confguration file.
  * [System]: Retrieve send Tx data.
  * [System]: Delete end-device fleet.
  * [System]: Add OpenVPN.
  * [System]: Add halt command (with restrictions).
  * [System]: Reset configuration .
  * [LOCAL FTP interface]: License management.
  * [WEB interface]:End-device parameters edition.
  * [WEB interface]: Download Open-VPN configuration.
  * [USB interface]: Add Tx data withUSB key command.

==== Evolutions =====

  * [LOCAL FTP interface]: The status file names now contain a OK/KO status.
  * [USB interface]: The status file names now contain a OK/KO status.
  * [USB interface]: move XXXXXXXX_password file.
  * [System]: Remove rx2_frequency and rx2_datarate parameters from configuration.
  * [System]: Change Tx data field order.
  * [System]: Serial number now with 8 digits.
  * [system]: LED behavior.
  * [System]: Update license file format.
  * [System]: Shut down WiFi administration interface after 1 hour.

==== Restrictions ====

  * [System]: Wirnet iFemtoCell SPN pass on WiFi connection only if we unplug the ethernet wire.
  * [System]: Cannot declare an OTAA end-device starting with multiple 0 (e.g. 0000000000112233) if an ABP end-device has the same name (00112233).
  * [System]: End-devices sequence numbers are reset if the end-devices are restarted.
  * [System]: getOpenVPNConfiguration returns only "enable".
  * [System]: Halt on iFemtoCell SPN doesn't really stop the iFemtoCell. It reboots after a few seconds/minutes.
  * [System]: Region configuration lost between version 1.1.1 and 2.0.0 for US gateways.
  * [System]: Status is always "UNKNOWN" in the fleet.
  * [System]: Cannot create end-device immediately after a switch from region Australia 915-928 to AS 923MHz.
  * [System]: Received data are not correctly formated (no zero padding).
  * [System]: When switched off, the WiFi radio power is not truly powered off.
  * [LoRa]: Change of network_id do not reject frames of a mote that don't perform a new join.
  * [LoRa]: FSK is not supported with data rate 7.
  * [LoRa]: DR6 SF7-BW250 for RX2 data rate is not available for Asia and Japan Region.
  * [LoRa]: MonoSF drift from radio x central frequency is reduce from 400kHz to 300kHz.
  * [LoRa]: Possible to set Tx power higher than 23 dBm in Korea Rrgion.
  * [Remote HTTP]: The push URL cannot contain any question mark sign, has to end with a slash, and it always has a suffix appended to what the user has entered.
  * [WEB interface]: When the timezone is changed, a reboot is needed to apply the configuration in the log files.
  * [WEB interface]: Network parameters are lost when a network interface is turned off on WEB interface.
  * [WEB interface]: Reset configuration is too slow, nothing happens before 30s - 60s.


===== Compatibility =====

====Hardware====
  * No known issues on various hardware product versions.

====Software====
  * Compatible with Wirnet iFemtocell firmware, from version 3.0.0..
  * Compatible with Wirnet iFemtocell/SPN firmware version 1.0.3 and 1.1.1.

===== Download =====

__For SPN new installation only (no SPN firmware installed):__ \\
{{ :wiki:liveburner_2.0.3-spn_klk-wifc.ipk |}}  md5: ''e1bd24ba904baba5020d3d2f1a236950''.

__For SPN upgrade only (SPN firmware already installed):__ \\
{{ :wiki:keros_2.0.3-spn_klk-wifc.ipk |}} md5:''14ce5c413c0adaa826fe39872a749358''

__For SPN reinstallation and reset (SPN 2.0.3 firmware already installed):__ \\
{{ :wiki:liveburner_2.0.3-spn_klk-wifc.ipk.gpg |}} md5:''616c6befac9c53d7e35b87bfdb5cbd81''
Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Page Tools
