Wanesy™ SPN (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======= iFemtoCell SPN firmware v2.0.3 (June 2018) ======

<note tip>
KERLINK developed a new “SPN” version for Wirnet™ iFemtoCell: the 2.0.

Disclaimer: This version does not replace the 1.1. __This is not the “end of life “of SPN 1.1, which can still be ordered.__

The 2.0 brings additional features, such as the “Multi-gateway LoRa© Management”.
Its functional perimeter being different from the 1.1, the 2.0 version requires another commercial license.\\
So:
  * <fc #ff0000>if you have SPN 1.1 and you want to keep SPN 1.1: No change required, please, do not upgrade to the 2.0 firmware. The 1.1 license is not compatible with the 2.0 firmware</fc>.
  * if you have SPN 1.1 and you want to use SPN 2.0: you have to order a specific license (paying) before using the 2.0 firmware. 

If you wish more information about the Wanesy™ SPN 2.0, please contact the sales: [[salesteam-ww@kerlink.com]]

</note>

===== Changes from 1.1.1 =====

==== New features =====

  * [LoRa] Listen Before Talk (LBT) for Japan and Korea.
  * [Multi-gateways]: SPN can now receive/send LoRa frames from/to other SPN iFemtoCell, Wirnet station and Wirnet iBTS.
  * [SMS interface]: New interface to : get Rx data, add Tx data, manage configuration, manage end-devices, update interface activation, manage gateways, get status, update confguration file.
  * [System]: Retrieve send Tx data.
  * [System]: Delete end-device fleet.
  * [System]: Add OpenVPN.
  * [System]: Add halt command (with restrictions).
  * [System]: Reset configuration .
  * [LOCAL FTP interface]: License management.
  * [WEB interface]:End-device parameters edition.
  * [WEB interface]: Download Open-VPN configuration.
  * [USB interface]: Add Tx data withUSB key command.

==== Evolutions =====

  * [LOCAL FTP interface]: The status file names now contain a OK/KO status.
  * [USB interface]: The status file names now contain a OK/KO status.
  * [USB interface]: move XXXXXXXX_password file.
  * [System]: Remove rx2_frequency and rx2_datarate parameters from configuration.
  * [System]: Change Tx data field order.
  * [System]: Serial number now with 8 digits.
  * [system]: LED behavior.
  * [System]: Update license file format.
  * [System]: Shut down WiFi administration interface after 1 hour.

==== Restrictions ====

  * [System]: Wirnet iFemtoCell SPN pass on WiFi connection only if we unplug the ethernet wire.
  * [System]: Cannot declare an OTAA end-device starting with multiple 0 (e.g. 0000000000112233) if an ABP end-device has the same name (00112233).
  * [System]: End-devices sequence numbers are reset if the end-devices are restarted.
  * [System]: getOpenVPNConfiguration returns only "enable".
  * [System]: Halt on iFemtoCell SPN doesn't really stop the iFemtoCell. It reboots after a few seconds/minutes.
  * [System]: Region configuration lost between version 1.1.1 and 2.0.0 for US gateways.
  * [System]: Status is always "UNKNOWN" in the fleet.
  * [System]: Cannot create end-device immediately after a switch from region Australia 915-928 to AS 923MHz.
  * [System]: Received data are not correctly formatted (no zero padding).
  * [System]: When switched off, the WiFi radio power is not truly powered off.
  * [LoRa]: Change of network_id do not reject frames of a mote that don't perform a new join.
  * [LoRa]: FSK is not supported with data rate 7.
  * [LoRa]: If LBT feature is used, frames in SF9&SF10 will be rejected.
  * [LoRa]: DR6 SF7-BW250 for RX2 data rate is not available for Asia and Japan Region.
  * [LoRa]: MonoSF drift from radio x central frequency is reduce from 400kHz to 300kHz.
  * [LoRa]: Possible to set Tx power higher than 23 dBm in Korea Region.
  * [Remote HTTP]: The push URL cannot contain any question mark sign, has to end with a slash, and it always has a suffix appended to what the user has entered.
  * [WEB interface]: When the timezone is changed, a reboot is needed to apply the configuration in the log files.
  * [WEB interface]: Network parameters are lost when a network interface is turned off on WEB interface.
  * [WEB interface]: Reset configuration is too slow, nothing happens before 30s - 60s.


===== Compatibility =====

====Hardware====
  * No known issues on various hardware product versions.

====Software====
  * Compatible with Wirnet iFemtocell firmware, from version 3.0.0..
  * Compatible with Wirnet iFemtocell/SPN firmware version 1.0.3 and 1.1.1.

====LoRaWAN====
  * Compatible with LoRaWAN Specification V1.0.2
  * Compatible with LoRaWAN Regional Parameters V1.1
===== Download =====

__For SPN new installation only (no SPN firmware installed):__ \\
{{wiki:liveburner_2.0.3-spn_klk-wifc.ipk}} md5: ''e1bd24ba904baba5020d3d2f1a236950''.

__For SPN upgrade only (SPN firmware already installed):__ \\
{{wiki:keros_2.0.3-spn_klk-wifc.ipk}} md5:''14ce5c413c0adaa826fe39872a749358''

__For SPN reinstallation and reset (SPN 2.0.3 firmware already installed):__ \\
{{wiki:liveburner_2.0.3-spn_klk-wifc.ipk.gpg}} md5:''616c6befac9c53d7e35b87bfdb5cbd81''
Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Page Tools
