Wanesy™ SPN (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== SPN upgrade ======

<note important>
This page concern the firmware upgrade. It is only dedicated to gateways with the SPN firmware already installed.
</note>

===== From firmware 2.0.3 =====

From firmware 2.0.3 upgrade can be triggered from:
  * USB
  * HTTP rest
  * FTP server
  * Web interface

Consult the [[wiki:resources|user guide]] for more information.

To update from SPN with data loss (recommended) (SPN already installed):
liveburner_x.y.z-spn_klk-wifc.ipk.gpg

To install from SPN without data loss (SPN already installed):
fwupgrade_x.y.z-spn_klk-wifc.ipk.gpg

Upgrade files are available in the firmware [[wiki:resources#spn_firmware_to_install_spn|resources]] pages.

<note important>
Once the loading bar is full, a few seconds are required to see the //reboot station// button.
</note>

==== Impacts on your network ====

  * Configuration parameters are not impacted by the firmware upgrade **except the RX configuration parameters**. LoRa RX parameters need to be reconfigured after the upgrade.
  * Tx power may be lost after upgrade
  * Fleet configuration is not impacted by the firmware upgrade.
  * All SPN parameters and the fleet can be uploaded/downloaded (in JSON formated files) to configure/backup the gateway.
  * If an upgrade is triggered, these files will have to be regenerated to comply with the new firmware.

Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Page Tools