Wanesy™ SPN (End Of Life)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Network interfaces ======

<note important>
Wanesy SPN configuration is done via Ethernet, Wi-Fi or GSM. 
When changing the Network configuration, make sure the configuration is correct, otherwise, you might have trouble connecting to the gateway.
If the connection to the gateway is lost, the gateway will have to be formatted, resulting in the loss of your data.
</note>

When connecting for the first time to the gateway, a DHCP server is mandatory to get an IP. Wanesy SPN does not have a default static IP address.

===== Gateway's URL =====

If the gateway is connected to a DNS server, then the web user interface can be accessed through the following address:
^ Gateway model                   ^ Address                    ^
| **Wirnet iFemtoCell**           | ''http://klk-wifc-XXXXXX/'' |
| **Wirnet iStation**             | ''http://klk-wiis-XXXXXX/'' |
| **Wirnet iFemtoCell-evolution** | ''http://klk-fevo-XXXXXX/'' |
Where ''XXXXXX'' are the last 6 digits of board id. More information [[.:..:..:introduction:quickstart#web_user_interface_access|here]].

If the gateway is not connected to a DNS server, then the web interface can be accessed through the gateway's IP address. If you forgot the IP address, you can retrieve it using the following [[.:..:..:support:faq#How to find the IP address of my Wanesy SPN gateway?|methods]]. 

===== Network monitoring =====

The current Wanesy SPN version is designed to work with only one interface at a time. Failover/handover mechanism is not fully available on the network interfaces. Choosing between Ethernet, GSM and Wi-Fi is recommended.

Failover/handover mechanism and network monitoring should be available within the next releases.

===== GSM configuration =====

Wirnet iStation and iFemtoCell-evolution have a native GSM support. Wirnet iFemtoCell does not have native GSM support but a GSM dongle can be connected to gateway USB port.

<note warning>
The list of compatible dongles for iFemtoCell is available [[https://wikikerlink.fr/wirnet-productline/doku.php?id=wiki:ifemtocell:cellular_backhaul_ifemto|here]] (use the column **v4.0.4**)
</note>

To access the GSM configuration:
  - Connect the dongle to the gateway
  - Go to page ''Administration => Network => GSM'' and refresh until GSM page is no more grayed out (restart gateway if refresh does not work after a while)

{{.:..:..:webui:gsm_configuration.png?500|GSM configuration}}

A list of Mobile Network Code and Mobile Country Code can be found [[http://mcc-mnc.com/|here]].
Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Page Tools
