Wanesy™ SPN

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== LoRa network configuration ======

Wanesy SPN is designed to handle the communication with multiple end-devices over the LoRaWAN protocol. The list of all the registered end-devices constitutes the fleet (maximum 5000 devices).

The LoRaWAN protocol relies on multiple parameters such as frequencies, class, IDs, etc. To use an end-device with SPN, the end-device and the gateway need to use the same parameters. 

There are parameters that are common to the entire fleet:
  * Regional parameters (The LoRaWAN protocol depends on the region)
  * Rx frequencies 

Some parameters are specific to each end-device:
  * Class (A or C)
  * Activation type (Over The Air Activation, Activation By Personalization)
  * Pairing IDs (Device address, network session key, …)
  * Receive window slot and frequency

A few kind of end-devices use pre-defined parameters. In this case, only the gateway needs to be configured (with the same parameters).

More information about the LoRaWAN protocol can be found on the [[https://www.lora-alliance.org/ | LoRa-alliance ]] website.

Wanesy™ SPN

User Tools

Site Tools

Page Tools