Wanesy™ SPN

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Administration ======

Many small features/configuration can be used from the ''Administration'' menu, such as reboot, halt, time configuration, password change, etc.

Most of them are simple enough to not be detailed.

===== Factory Reset =====

A factory reset of the gateway can be triggered from ''Administration => Gateway => Factory reset''. This feature recovers the last liveburner used.
If a gateway has been upgraded directly from a KerOS firmware to the last Wanesy SPN firmware with a liveburner, then the factory reset will reinstall the last Wanesy SPN firmware.

===== Halt =====

This feature can be used to properly stop the gateway before unplugging the power. It is available from ''Administration => Gateway => Turn off gateway''

===== Configuration =====

The configuration of the gateway can be either downloaded or uploaded via ''Administration => Main configuration'' menu. Before uploading a configuration file, it is advised to download the current configuration to use it as a template. If some configuration fields are not present in the file, then these fields are just not updated. If an error (syntax or value) is present in the file, then the entire file is discarded.

{{.:..:main_configuration.png|Main configuration}}

<note tip>
Once a gateway is configured, the configuration can be downloaded in order to make a backup.
</note>

Field description is available [[.:..:..:releases:2.1:configuration_file|here]].

The configuration of the gateway can be reset to its default.

Wanesy™ SPN

User Tools

Site Tools

Page Tools