Differences

This shows you the differences between two versions of the page.

--- wiki:istation:connect_istation [2019/09/25 16:22]
ghi
+++ wiki:istation:connect_istation [2024/07/23 08:36] (current)
lge [Power supply the iStation]
@@ Line 1: / Line 1: @@
 ====== Wirnet™ iStation: Connect to the gateway ======
-Detailed instructions about Wirnet iStation installation and maintenance are available on the [[wiki:resources:resources#documentation|Resources and documentation page]].
+Detailed instructions about Wirnet iStation installation and maintenance are available on the [[wiki:quickstart:quickstart_istation#documentation|Wirnet iStation setup page]].
 ===== Power supply the iStation =====
-The Wirnet iStation gateway is powered with a PoE injector. Please see section 3.3 of [[wiki:resources:resources#documentation|Wirnet™ iStation Product Description]] for more information.
+The Wirnet iStation gateway is powered with a PoE injector. Please refer to the leaflet (contains the list of accessories): {{ :documentation:commercial_leaflet_wirnet_istation_v3.1.pdf |}}
 Connect the PoE output connector to the Ethernet port on the bottom side of the gateway.
@@ Line 13: / Line 13: @@
 The iStation should power on, showing a solid green LED, accompanied by a red LED starting solid, then blinking during bootup.
-===== Connect through the network =====
+===== Local connection (USB) =====
-Please see the [[wiki:systeme_mana:connection_credentials|connection, login and credentials page]] for more information on how to connect to your iStation.
+You can connect a PC directly to the iStation with a USB cable. In this mode, the gateway will simulate an ethernet device.
+  * In nominal case, after few seconds, your PC will obtain an IP address and you will be able to start a SSH client or HTTP connection on gateway IP 192.168.120.1.
+  * In particular case you are using a DHCP server on your computer, gateway will directly obtain an IP address. A connection can then be done on this IP address.
+{{:images:istation_USB_C_small.jpg?| }}
+See [[wiki:systeme_mana:connection_credentials#default_password|here for more information]] about SSH/HTTP connection details.
 ===== Connect using the debug probe =====
+Wirnet™ Debug Probe is the only compatible debug probe.
+==== Connection ====
+Plug Wirnet Debug probe on your gateway Type-C connector from one side and on USB connector of your computer on the other side as explained in {{ wiki:e-con-quick_start_guide_-_wirnet_debug_probe-v2..pdf| Wirnet Debug probe quickstart}}.
+{{:images:debug_probe_istation_term.png?450 |}} {{:images:debug_probe_istation_gw.png?505|}}
+Once plugged correctly:
+  * Green equipment led on Debug probe should be ON (equipment «power» led remote display).
+  * Serial port led (on PC side) should be ON (or blink if communication is on-going between equipment and terminal)
+  * USB Type-A connector should be usable to plug a USB stick (Wirnet Debug probe can also be used as adapter without connection to a computer).
+==== Windows installation ====
+  - Download the [[http://www.ftdichip.com/Drivers/VCP.htm|ftdi drivers]] for the debug probe
+  - Install the drivers
+==== Linux installation ====
+On Linux, everything should work out of the box. The serial port will be located in ''/dev/ttyUSB*''.
-<note warning>Available soon</note>
+==== Connection to the Wirnet™ iStation ====
+  - Open a serial terminal (HyperTerminal, PuTTY, Teraterm, GNU screen, minicom, etc.)
+  - Select the serial port created by the FTDI driver (usually: ''COM3'' on Windows, ''/dev/ttyUSB0'' on Linux)
+  - Apply the following parameters to use your serial connection:
+     * baud rate : ''115200''
+     * data length : ''8''
+     * parity : ''none''
+     * stop bit : ''1''
+     * flow control : ''none''
+  - Enter your credentials in the command prompt:
+     * login: ''root''
+     * password: ''pdmk-$serialno''
+''pdmk-**$serialno**'' is the default password on the gateway. See [[wiki:systeme_mana:connection_credentials#default_password|here for more information]]. In case of failure, request password to [[support@kerlink.fr]].

Wirnet™ i-series

User Tools

Site Tools

Differences

Page Tools