Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Semtech HALv2 v5.1.0-klk5 (June 2018) ======

===== Changelog =====

   * ''klk_spectral_scan'' tool: Few corrections made.
   * ''send_pkt'': Do not exit without explicit command.
   * utils tools: Add a local configuration file.
   * utils tools: Correct json format in config.json file.
   * utils tools: Add ''loraloc_info'' tool.
   * utils tools: Add ''rx_test.sh'' tool.
   * Correction on TX acknowledge feature.
   * Compilation: Rename ipk target to fpga.
   * Compilation: Rename util target to utils.
===== Restrictions =====  

  * ''send_pkt'': Sometimes, the packets are not retransmitted when using an attenuation.
  * Check temperature at startup is wrong.
  * If used in conjunction with a KerOS firmware older than v3.4 and a system restoration, some files may be lost. Indeed, when restoring the installed packages, if the firmware is restored after the packet forwarder, some of the files may be replaced by the firmware restoration. Workaround: Reinstall the packet forwarder and HAL packages after a system restoration.
  * ''klk_spectral_scan'': No timeout when scanning beyond band capacities.


===== Compatibility =====

<note important>
HAL v5.1.0 source code and tools are compatible only with __FPGA firmware v61 and Wirnet™ iBTS KerOS firmware v3.x.__

To know your FPGA software version consult [[wiki:faq|the FAQ]].

To upgrade your fpga version use the [[resources:resources_fpga_upv61|FPGA updater]] package (v61).
</note>


===== Download =====

{{ :resources:libloragw2-5.1.0-klk5.tar.gz |}} (MD5: ''6367d12c167e6e4c0814319e1f09fb52'')

Wirnet™ i-series

User Tools

Site Tools

Page Tools