Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Semtech Packet Forwarder V2 v4.0.0 (July 2017) =====

==== Tags ====

=== pre-compiled .ipk ===
packet-forwarder-v2_4.0.0-klk7-4.0.1-klk3_klk_lpbs.ipk

==== Firmware ====

=== Restrictions ===
 
   * Previous versions of the packet forwarder need to be manually uninstalled before installing this version of the software.
   * No fine timestamp available when using SF8 BW500 datarate.
   * The example configuration file //‘’config_single_antenna_64ch_US915.json’’// misses one //“chan_LoRa_std »// field and one  //“chan_FSK”// field


=== Compatibility ===
<note important> 
Packet forwarder v4.0.0 is only compatible with : 
    * keros firmware v3.x.x
    * FPGA firmware v58
    * Semtech HAL v4.0.1.
To know your FPGA software version consult the FAQ [[wiki:faq|How to read FPGA version ?]]. 
</note>

=== Download ===

== pre-compiled .ipk ==

[[ftp://wiki-ftp-multislots:XGwglfcXwGOTpndzuP7R@ftp.kerlinkm2mtechnologies.fr/_kerlink/spf2_4.0.0-klk7_4.0.1-klk3_klk_lpbs.ipk|packet-forwarder-v2_4.0.0-klk7-4.0.1-klk3_klk_lpbs.ipk]] 
([[ftp://wiki-ftp-multislots:XGwglfcXwGOTpndzuP7R@ftp.kerlinkm2mtechnologies.fr/_kerlink/spf2_4.0.0-klk7_4.0.1-klk3_klk_lpbs.ipk.md5|md5sum]]) 

== Semtech readme file ==

{{ :wiki:pktfwd_4.0.0_semtech_readme.md |pktfwd_4.0.0_semtech_readme.md}} 

== Packet Forwarder protocol ==

Packet Forwarder Protocol v1.2 : {{ :wiki:protocol_v4-0-0.txt |Protocol for SPFv2 v4.0.0}} 

== json configuration file example == 

json configuration file examples are installed by default under ''/user/spf2/etc/''.

<note important>  To upgrade your gateway follow the software update procedure : http://wikikerlink.fr/wirnet-ibts/doku.php?id=wiki:upgrade
Packet forwarder logs will be available in /var/log/messages files</note>
Wirnet™ i-series

User Tools

Site Tools

Page Tools
