Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Wirnet™ iFemtoCell Resources ======

===== Documentation =====

Wirnet iFemtoCell Installation and Maintenance Manual v3.0: {{ :resources:e-con-installation_and_maintenance_-_wirnet_ifemtocell-v3.0.pdf |}}.


===== Compatibility matrix =====

<note tip> FIXME à revoir avec CPF</note>


^   KerOS firmware version  ^   Semtech Packet Forwarder (SPF)   ^   <fc #008080>Common Packet Forwarder (CPF)</fc>    ^
^  Since 4.x.x  |  <fc #ff0000>**Not compatible**</fc>  |  <fc #008000>**Compatible**</fc>  | 
^  3.x.x and lower  |  <fc #008000>**Compatible**</fc>  |  <fc #ff0000>**Not compatible**</fc>  |

Before KerOS firmware release v4.x.x, Kerlink provided pre-compiled Semtech packet forwarder (SPF). Since KerOS firmware release v4.x.x, only the pre-compiled Common packet forwarder (CPF) is provided, pre-compiled SPF are no more compatible.\\


^                     ^  KerOS firmware version  ^  Packet Forwarder version  ^  HAL version  ^
^  Wirnet iFemtoCell  |  **4.0.4**  |  <fc #008080>cpf</fc>?  |  ?  |
^  Wirnet iFemtoCell  |  3.x.x  |  spf_3.1.0-klkx  |  4.1.3-klkx  |

For Wirnet iFemtoCell with firmware release v3.x.x or v2.x.x (before v4.0.4), please refer to old [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php|Wirnet™ iFemtoCell wiki]].


===== Wirnet iFemtoCell KerOS firmware =====

Here is the list of downloadable firmware releases and their major updates compared to previous versions. To get information on older firmware consult the [[wiki:sw_history|firmware release history]] page.

<note important>
If the Wirnet iFemtoCell will be connected to a Wanesy Management Center, please check the compatibility matrix from the [[http://wikikerlink.fr/wanesy-ran/doku.php?id=wiki:home|WMC Wiki]] first.

Software releases from this page are not guaranteed to work with Wanesy Management Center.
</note>

  * [[resources_ifemto:release_4.0.4|Wirnet iFemtoCell KerOS firmware v4.0.4 (February 2019)]].


===== Toolchain =====

Kerlink provides the cross-toolchain, libraries and headers necessary to the compilation of an application. For more information consult the [[wiki:toolchain|Toolchain]] page.
 
  * [[resources_ifemto:resources_toolchain_fw_4.x|Wirnet iFemtoCell Toolchain firmware v4.X]].
 

===== Common Packet Forwarder =====

The packet forwarder is a program running on the host of a Lora gateway that forwards RF packets received by the gateway to a server through an IP/UDP link and emits RF packets that are sent by the server. For more information consult the [[wiki:cpf|Kerlink Common Packet forwarder]] page.

<note tip> TODO no CPF </note>
Wirnet™ i-series

User Tools

Site Tools

Page Tools
