Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~
====== Frequently Asked Questions ======
  * <fc #87ceeb>__**Common FAQ**__</fc>

[[wiki:faq#what_is_default_login_password|What is default login/password?]]\\
[[wiki:faq#what_to_do_in_case_the_password_has_been_lost|What to do in case the password has been lost?]]\\
[[wiki:faq#how_to_read_software_version|How to read software version?]]\\
[[wiki:faq#how_to_manually_update_the_gateway_firmware|How to manually update the gateway firmware?]]\\
[[wiki:faq#how_to_factory_reset_the_gateway|How to factory reset the gateway?]]\\
[[wiki:faq#what_is_the_default_leds_behavior|What is the default LEDs behavior?]]\\
[[wiki:faq#how_to_shutdown_restart_the_gateway|How to shutdown/restart the gateway?]]\\
[[[wiki:faq#where_are_the_logs|Where are the logs?]]\\
[[wiki:faq#is_an_SDK_available?|Is an SDK available?]]\\

  * <fc #87ceeb>__**Wirnet™ iBTS FAQ**__</fc>

[[wiki:faq#what_is_default_wirnet_iBTS_hostname|What is default Wirnet iBTS hostname?]]\\
[[wiki:faq#how_to_read_fpga_version|How to read FPGA version?]]\\


  * <fc #87ceeb>__**Wirnet™ iFemtoCell FAQ**__</fc>

[[wiki:faq#what_is_default_wirnet_ifemtocell_hostname|What is default Wirnet iFemtoCell hostname?]]\\

----
  * <fc #87ceeb>__**Common FAQ**__</fc>
===== What is default login/password? =====
The default root password is defined here: [[wiki:credentials|Credentials]].

===== What to do in case the password has been lost? =====

In case the root password of the Wirnet iBTS or Wirnet iFemtoCell has been lost, an autorun script can be used on a USB key to reset the password. Refer to the [[wiki:sw_updates#specific_files|USB autorun section]] and to the [[wiki:credentials#how_to_change_the_passwords|change the passwords section]] for more information.

If the USB password has also been lost, please contact the support.

===== How to read software version? =====

Firmware version is written in the file ''/etc/version''.
<code bash>
$ cat /etc/version
4.0.2_20180821165420
</code>

Firmware version is also displayed on Web Interface:\\
{{:images:fw_version_webui.png?nolink&400}}

===== How to manually update the gateway firmware? =====
It can be done by IP network or USB. Please refer to [[wiki:sw_updates|Software update]] dedicated section.

===== How to factory reset the gateway? =====

==== Via Web interface ====
{{:images:reset_factory_webui.png?450&nolink|}}

To factory reset the gateway, you can use the stock restore feature. A “stock restore” will factory reset the gateway. **All data will be lost**.
==== Via SSH ====
To trigger a "stock restore" execute the following commands:
<code>
# kerosd -s 
# reboot
</code>
More information about "stock restore" feature is available [[wiki:features#stock_restore|here]].
==== Via SMS ====
Two SMS can be sent to the gateway to factory reset the gateway.

1st SMS to send to the gateway:
<code bash>
[login:password] [sms_command_id] system/restore/stock
</code>
2nd SMS to send to the gateway:
<code bash>
[login:password] [sms_command_id] system/reboot
</code>
More information about "SMS" feature is available [[wiki:sms|here]].
 ===== What is the default LEDs behavior? =====
The LEDs behavior is described [[wiki:peripherals#leds| here]].

===== How to shutdown/restart the gateway? =====

To stop the gateway, use the command ''halt''.\\

To reboot the gateway, use the command ''reboot''.

===== Where are the logs? =====
Most traces of the Wirnet iBTS and Wirnet iFemtoCell can be found under ''/var/log/messages*''.

===== Is an SDK available? ===== 

Kerlink doesn’t provide an SDK to generate a Wirnet iBTS or iFemtoCell firmware, just what is necessary to build an application.
Information about the Toolchain is available in the [[wiki:toolchain|toolchain page]]. 

----

  * <fc #87ceeb>__**Wirnet™ iBTS FAQ**__</fc>

===== What is default Wirnet iBTS hostname? =====
The default hostname of the Wirnet iBTS is “klk-lpbs-**04014F**” where **04014F** is the end of the CPU serial number. This information is present on the sticker placed on the CPU module.

{{ :images:cpu_ibts.jpg?nolink&400 |}}



===== How to read FPGA version? =====

FPGA versions are contained in ''/tmp/board_info.json'' file: parameter ''fpga_swver''.\\
There is one FPGA per LoRaLOC board. If you have 3 LoRaLOC, there will be 3 versions in the file. \\
\\
__Example__: On this gateway, FPGA version is v61.\\
<code>
# grep "fpga_swver" /tmp/board_info.json   
"fpga_swver": "61",
"fpga_swver": "61",
"fpga_swver": "61",
</code>

----

  * <fc #87ceeb>__**Wirnet™ iFemtoCell FAQ**__</fc>
===== What is default Wirnet iFemtoCell hostname? =====
The default hostname of the Wirnet iFemtoCell is “klk-wifc-**020010**” where **020010** is the end of the board ID. This information is present on the sticker placed on the rear side of the case.

{{ :images:sticker_femto.png?nolink&350 |}}
Wirnet™ i-series

User Tools

Site Tools

Page Tools
