Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== KerOS firmware v5.10.1 (October 2023) ======

===== Changes from v5.9.0 =====

==== Release corrections ====

  * Fix missing channels in LoRaWAN radio configuration
  * Enable LoRaWAN radio configuration by [[wiki:lora:basic_station_forwarder|Basic Station]] on iZepto-cell products
  * Monitor temperature range at LoRa service start
  * Reduce RAM consumption caused by internal databases

==== Evolutions====

  * Add the possibility to use [[wiki:systeme_mana:webui#https_web_interface|HTTPS]] for the Web User Interface
  * Support of EC25J auto-Fuota

===== Restrictions =====
  *** IPSec is not yet supported **
  * Some issues with the Wi-Fi interface (instabilities, no fallback...) on Wirnet iFemtoCell
  * When upgrading from KerOS firmware 4.x, all trustzone secrets are lost
  * When upgrading from KerOS FW 4.3.3, a hardware reset is necessary for FW 5.x burner to correctly detect USB
  * Update status for an update from KerOS FW 5.1.x, FW 5.2.x or FW 5.3.x is in error, but the update is working fine
  * No more support of GSM dongles (please contact Kerlink if you plan to use one)
  * When iZepto-E is powered by a computer, it cannot benefit from the connection of a gateway in router mode
  * The activation/deactivation of the GSM from the local web interface takes some time to execute, so previous activation status remains displayed for a while.     A page refresh after a delay of 15-20s after the action shows the right status


===== Firmware =====

==== Compatibility ====

  * Compatible with Wirnet™ i-series gateways (Wirnet iBTS, Wirnet iFemtoCell, Wirnet iStation, Wirnet iFemtoCell-evolution, Wirnet iZeptoCell Ethernet, Wirnet iZeptoCell Cellular).

{{:images:compatibility-5.9.0.jpg?1100|}}

=== Software ===

  * Compatible with Wirnet™ i-series gateways secured with Kerlink Production fuses or without any fuses flashed.
  * Regular update (''keros.ipk'') is **incompatible** with firmware older than v5.x

<note important>
    * To upgrade the system from KerOS version 4.3.3 to KerOS version 5.x the use of a liveburner is MANDATORY. Two possibilities are available:
    * Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To use a custom liveburner, please refer to the dedicated page: [[wiki:keros_custo:upgrade_major_version|Major version upgrade with a custom liveburner]].
    * Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware)
</note>

==== Delivery ====

<note important>
The firmware is released in two formats: __KerOS__ and __Liveburner__.\\

__KerOS :__ Update the Firmware\\
To update the firmware **from v5.x**, the regular update procedure can be used.
See [[wiki:keros_custo:upgrade#upgrade_using_a_keros_package|system upgrade]] page.

\\
__Liveburner :__ Reset the Firmware of the product
  * Update stock version with FW 5.10.1.
  * Reset the default password on your gateway.
  * Erase the whole partition to reinstall the firmware.
</note>

===== Download =====

  * KerOS IPK 5.10.1:{{ :resources_multi_hardware::keros_5.10.1_klkgw-signed.ipk}} md5: ''ba091bec29da89d2d238184eb983e5ed''
  * Liveburner IPK 5.10.1: {{ :resources_multi_hardware::liveburner_5.10.1_klkgw-signed.ipk}} md5: ''e4d58a7d34594647c59a3f45e5b1afcb''
  * Liveburner IPK 4.3.3-2: {{ :resources_multi_hardware::liveburner_4.3.3-2_klkgw-signed.ipk}} md5: ''12CFEFB8D4630A34AA90C77E6C73A193''
  * Custom liveburner IPK 5.10.1: {{ :resources_multi_hardware::custom-liveburner_5.10.1_klkgw-signed.ipk}} md5: ''8f035e26a0e5c227f3f3ed02e4b0f946''
  * Update liveburner package: {{ :resources_multi_hardware::update_liveburner_package-v5.5.4.tar.gz}} md5: ''b34113c633b829de2422e297ccdb1f53''
  * 64-bit toolchain: {{ :resources_multi_hardware::poky-glibc-x86_64-keros-toolchain-klkgw-5.10.1.sh}} md5: ''d62f2552771d7b3964629480aa885fdf''
Wirnet™ i-series

User Tools

Site Tools

Page Tools
