Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== KerOS firmware v5.7.2 (February 2023) ======

===== Changes from v5.5.4 =====

==== Release corrections ====

  * Fix security vulnerabilities on KerOS API
  * Trigger autorestart of GWMP sockets when uplink message are timed out
  * Define pools instead of servers for NTP synchronization
  * Properly stop and restart LoRaWAN frames reception when applying a different channel plan

==== New features ====

  * Advanced LoRaWAN frames filtering (normal and reverse) with the support of :
    * Multiple ranges filters for NetID, JoinEUI and DevEUI
    * Proprietary frames 
  * Support default generic APN configuration (no MCC/MNC needed), by default set to BICS APN in provisioning file
  * Limited support of Wirnet iZeptoCell Cellular, see restrictions for more details



==== Evolutions====

  * Make ZTP more robust against backhaul disconnections
  * Set network monitoring enabled by default
  * Prevent disabling cellular backhaul on WebUI for new product iZeptoCell Cellular
  * Set a fallback DNS server configuration by default
  * Automatically adjust TCP packets (fragmentation) depending on backhaul MTU
  * Add option --minimal/-m for get_logs script to get a smaller logs archive
  * Support of Japan version of WAN modem installed in iFemtocell-evo 923 and iStation 923

===== Restrictions =====
  *** IPSec is not yet supported **
  * Some issues with the Wi-Fi interface (instabilities, no fallback...) on Wirnet iFemtoCell
  * When upgrading from KerOS firmware 4.x, all trustzone secrets are lost
  * When upgrading from KerOS FW 4.3.3, a hardware reset is necessary for FW 5.x burner to correctly detect USB
  * Update status for an update from KerOS FW 5.1.x, FW 5.2.x or FW 5.3.x is in error, but the update is working fine
  * No more support of GSM dongles (please contact Kerlink if you plan to use one)


===== Firmware =====

==== Compatibility ====

=== Hardware ===

  * Compatible with Wirnet™ i-series gateways (Wirnet iBTS, Wirnet iFemtoCell, Wirnet iStation, Wirnet iFemtoCell-evolution, Wirnet iZeptoCell Ethernet, Wirnet iZeptoCell Cellular).

++++Details|
  * **Wirnet iBTS**:
    * Fully compatible with Wirnet iBTS CPU module xxxATc03xxxx and above.
    * Partially compatible with Wirnet iBTS CPU module xxxATa01xxxx and ATb02xxxx (issue with reset Button).
  * **Wirnet iFemtoCell**:
    * Fully compatible with Wirnet iFemtoCell Board ID xxxBEb02xxxx, xxxBEc03xxxx, xxxBQa01xxxx and xxxBPa01xxxx and above.
    * Partially compatible with Wirnet iFemtoCell Board ID xxxBEa01xxxx.
  * **Wirnet iStation**:
    * Fully compatible with Wirnet iStation Board ID xxxCFb02xxxx, xxxCGb02xxxx, xxxCHb02xxxx and above.
  * **Wirnet iFemtoCell-evolution**:
    * Fully compatible with all Wirnet iFemtoCell-evolution Board ID xxxCVa01xxxx, xxxCWa01xxxx, xxxCXa01xxxx and above.
  * **Wirnet iZeptoCell Ethernet**:
    * Fully compatible with all Wirnet iZeptoCell Ethernet Board ID xxxDPc03xxxx, xxxDQc03xxxx and above.
  * **Wirnet iZeptoCell Cellular**:
    * Fully compatible with all Wirnet iZeptoCell Cellular Board ID xxxDwc03xxxx, xxxDXc03xxxx and above.
++++

=== Software ===

  * Compatible with Wirnet™ i-series gateways secured with Kerlink Production fuses or without any fuses flashed.
  * Regular update (''keros.ipk'') is **incompatible** with firmware older than v5.x

<note important>
  * To upgrade the system from KerOS version 4.3.3 to KerOS version 5.x the use of a liveburner is MANDATORY. Two possibilities are available:
    * Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To use a custom liveburner, please refer to the dedicated page: [[wiki:keros_custo:upgrade_major_version|Major version upgrade with a custom liveburner]].
    * Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware)
</note>

==== Delivery ====

<note important>
The firmware is released in two formats: __KerOS__ and __Liveburner__.\\

__KerOS :__ Update the Firmware\\
To update the firmware **from v5.x**, the regular update procedure can be used.
See [[wiki:keros_custo:upgrade#upgrade_using_a_keros_package|system upgrade]] page.

\\
__Liveburner :__ Reset the Firmware of the product
  * Update stock restore version with FW 5.7.2.
  * Reset the default password on your gateway.
  * Erase the whole partition to reinstall the firmware.
</note>

===== Download =====

  * KerOS IPK:{{ :resources_multi_hardware:firmware:keros_5.7.2_klkgw-signed.ipk}} md5: ''dbc5eaf5f7cbdae2691f74d98a259a58''
  * Liveburner IPK 5.7.2: {{ :resources_multi_hardware:firmware:liveburner_5.7.2_klkgw-signed.ipk}} md5: ''197c9c8f14952b1bf8339ad4c5863c2f''
  * Liveburner IPK 4.3.3-2: {{ :resources_multi_hardware::liveburner_4.3.3-2_klkgw-signed.ipk}} md5: ''12CFEFB8D4630A34AA90C77E6C73A193''
  * Custom liveburner IPK: {{ :resources_multi_hardware:firmware:custom-liveburner_5.7.2_klkgw-signed.ipk}} md5: ''455a15b7b10dae4171a2e8b1b04fdf79''
  * Update liveburner package: {{ :resources_multi_hardware::update_liveburner_package-v5.5.4.tar.gz}} md5: ''b34113c633b829de2422e297ccdb1f53''
  * 64-bit toolchain: {{ :resources_multi_hardware:firmware:poky-glibc-x86_64-keros-toolchain-klkgw-5.7.2.sh}} md5: ''25044a8909fa95749ad2eb8bcf52e00d''
Wirnet™ i-series

User Tools

Site Tools

Page Tools
