Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== System upgrade ======

===== Introduction =====

==== Software upgrade files ====

The firmware is released in two formats: __KerOS__ and __Liveburner__.
These have very different behavior, so please use the appropriate file before updating, see the difference in [[.:upgrade#upgrade_process| upgrade process]] section.

==== Major firmware upgrades ====

=== From KerOS version 4.3.3 to KerOS version 5.X ===

To upgrade the system from KerOS version 4.3.3 to KerOS version 5.X the use of a liveburner is mandatory. 
Two possibilities are available:

  * Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To use a custom liveburner, please refer to the dedicated page: [[wiki:keros_custo:upgrade_major_version|Major version upgrade with a custom liveburner]]
  * Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware). Use the liveburner provided in the [[wiki:firmware:lastversion | 5.X last version]] and the upgrade process below.


=== From KerOS version 3.x to KerOS version 4.1 ===

The upgrade from KerOS version 3.x to KerOS version 4.1 directly is not recommended by Kerlink. To do so, it must be done in 2 steps:
  - Upgrade to KerOS version 4.0 using a liveburner
  - Upgrade from KerOS version 4.0 to KerOS version 4.1 using a KerOS package


=== From KerOS version 3.x to KerOS version 4.0 ===

To upgrade the system from KerOS version 3.x to KerOS version 4.0 the use of a liveburner is mandatory. 
Two possibilities are available:

  * Upgrade with a custom liveburner. It allows to keep some elements like gateway configuration. To build a custom liveburner, please refer to the dedicated page: [[wiki:keros_custo:upgrade_keros3_to_4|Upgrade from KerOS version 3.x to 4.0]]
  * Upgrade with a regular liveburner (erasing the whole partition to reinstall the firmware). Use the liveburner provided in the [[wiki:keros_custo:upgrade_keros3_to_4|Upgrade from KerOS version 3.x to 4.0]] page and the upgrade process below.

===== Upgrade process =====

==== Upgrade using a KerOS package ====

Upgrade using a KerOS package (i.e. ''keros_4.X.Y_klk-lpbs-signed.ipk'' file) could be done only with the same major version. \\
Example: \\
  * Upgrade from Keros 4.X.X to KerOS 4.Y.Y is possible with a KerOS package (same major version)
  * Upgrade from Keros 4.X.X to KerOS 5.X.X is not possible with a KerOS package (major version is different)

The upgrade will install the new KerOS firmware with some consequences on the data:
  * User partition files will be preserved.
  * Passwords will be preserved.
  * The stock restore version will not be updated.
  * RootFS modifications will NOT be kept except files indicated in [[#configuration_management_sysupgrade|sysupgrade]] configuration files

The upgrade process itself is the following sequence:
  - Backup files indicated in configuration (system files and software/customer defined files).
  - Remove hotfix packages.
  - Upgrade the system itself.
  - Restore sysupgrade files => will override new firmware files!!

To upgrade your system, follow the software update process. Information [[wiki:keros_custo:sw_updates|here]].

==== Upgrade using a liveburner package ====

===== Configuration management (sysupgrade) =====

===== Hotfix packages management =====
Wirnet™ i-series

User Tools

Site Tools

Page Tools
