Wirnet™ i-series

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Resources ======

===== Gateway KerOS firmware =====

==== Last firmware ====

**Latest firmware and toolchain for all Wirnet™ i-series gateways are available here: [[:wiki:firmware:lastversion|KerOS firmware v5.11.0 (February 2024)]]**.

Kerlink provides the cross-toolchain, libraries and headers necessary to the compilation of an application. For more information consult the [[wiki:keros_custo:toolchain|Toolchain]] page.

==== Firmware history ====

To get information about all firmware releases, consult the [[wiki:resources:sw_history|firmware release history]] page.

<note important>
If your Wirnet gateway has to be connected to the Wanesy Management Center, please check the compatibility matrix from the [[http://wikikerlink.fr/wanesy-ran/doku.php?id=wiki:home|WMC Wiki]] first.

Software releases from this page are not guaranteed to work with Wanesy Management Center.
</note>

===== Packet Forwarder =====

The packet forwarder is a program running on the host of a Lora gateway that forwards RF packets received by the gateway to a server and emits RF packets that are sent by the server.

2 protocols are commonly used by servers:
  * GWMP: through an IP/UDP link. For more information consult the [[wiki:lora:cpf|Kerlink Common Packet forwarder]] page.
  * Basics™ Station: Through IP/TCP/Websocket link. For more information consult the [[..:lora:basic_station_forwarder|Kerlink Basic Station forwarder]] page.

==== Kerlink BasicStation Packet Forwarder ====

Kerlink BasicStation Packet forwarder is only compatible with 5.x KerOS firmware versions.

[[..:lora:bspf_ressources|Click here to download it.]]


==== "GWMP" Packet Forwarder compatibility matrix ====

^ KerOS firmware version ^ Compatibility Semtech Packet Forwarder (SPF) ^ Compatibility Common Packet Forwarder (CPF)  ^ 
^ 4.3.x and above (5.x)  | <fc #ffa600>**Not tested**</fc>:  [[wiki:lora:hal_spf|Click here to get the HAL for compilation]]  | <fc #008000>**Compatible with CPF integrated in firmware **</fc>                  |
^ 4.2.x                 | <fc #ffa600>**Not tested**</fc>:  [[wiki:lora:hal_spf|Click here to get the HAL for compilation]]  | <fc #008000>**Compatible CPF 1.2.x **</fc>: [[wiki:lora:cpf_1.2.4|Click here (one CPF version for all compatible gateways)]]    | 
^ 4.1.x                 | <fc #ffa600>**Not tested**</fc>:  [[wiki:lora:hal_spf|Click here to get the HAL for compilation]]  | <fc #008000>**Compatible CPF 1.1.x **</fc>: [[wiki:lora:cpf_1.1.x:cpf_1.1.7:resources|Click here (one CPF version for all compatible gateways) ]] |
^ 4.0.x                 | <fc #ffa600>**Not tested**</fc>:   [[wiki:lora:hal_spf|Click here to get the HAL for compilation]] | <fc #008000>**Compatible CPF 1.0.x**</fc> : \\     * [[wiki:lora:cpf_1.0.x:cpf_1.0.9:resources_ibts|Click here for iBTS version]] \\     * [[wiki:lora:cpf_1.0.x:cpf_1.0.9:resources_ifemtocell|Click here for iFemtoCell version]]         |
^ 3.x.x and lower       | <fc #008000>**Compatible**</fc>            | <fc #ff0000>**Not compatible**</fc>                                         |

The Kerlink CPF implements [[wiki:lora:GWMP|GWMP v2 protocol]] protocol and is compatible with LoRa Network Servers present on the market (Kerlink WMC, ChirpStack, TTN ...).

Before KerOS firmware release v4.x.x, Kerlink provided pre-compiled Semtech Packet Forwarder (SPF). Since KerOS firmware release v4.x.x, only the pre-compiled Common Packet Forwarder (CPF) is provided, pre-compiled SPF are no longer compatible.\\

For Wirnet iBTS with firmware release v3.x.x (before v4.0.2), please refer to old [[http://wikikerlink.fr/wirnet-ibts/doku.php|Wirnet™ iBTS wiki]].\\
For Wirnet iFemtoCell with firmware release v3.x.x or v2.x.x (before v4.0.4), please refer to old [[http://wikikerlink.fr/wirnet-ifemtocell/doku.php|Wirnet™ iFemtoCell wiki]].


==== Packet Forwarder packages ====

=== Last firmware ===

Starting with Wirnet gateways firmware version v4.3.0, packet forwarder is included in the firmware. The CPF does not need to be installed. The CPF needs to be enable. To consult how to enable the CPF: [[wiki:lora:keros_4.3.3:cpf_configuration|click here]].

=== Packages history ===

The packages of previous CPF releases are available on the dedicated page: [[wiki:lora:cpf_history|Packet Forwarder Release History]]

===== Documentation =====

==== Products documentation ====

  * Wirnet iBTS: [[wiki:quickstart:quickstart_ibts#documentation|Documentation of Wirnet™ iBTS Gateway]]
  * Wirnet iFemtoCell: [[wiki:quickstart:quickstart_ifemto#documentation|Documentation of Wirnet™ iFemtoCell Gateway]]
  * Wirnet iFemtoCell-evolution: [[wiki:quickstart:quickstart_ifevo#documentation|Documentation of Wirnet™ iFemtoCell-evolution Gateway]]
  * Wirnet iStation: [[wiki:quickstart:quickstart_istation#documentation|Documentation of Wirnet™ iStation Gateway]]
  * Wirnet iZeptoCell Ethernet: [[..:quickstart:quickstart_izepto#documentation|Documentation of Wirnet™ iZeptoCell Ethernet Gateway]]
  * Wirnet iZeptoCell Cellular: [[..:quickstart:quickstart_izepto_cellular#documentation|Documentation of Wirnet™ iZeptoCell Cellular Gateway]]
==== Application notes ====

  * {{ :documentation:lorawan®_gateways_radio_coexistence_description_of_usual_challenges_and_solutions_for_carrier-gra.pdf | LoRaWAN® Gateways Radio Coexistence Description of usual Challenges and Solutions For Carrier-Gra}}
  * [[https://resources.lora-alliance.org/complementary-technologies/lorawan-gateways-radio-coexistence-issues-and-solutions|Lorawan gateways radio coexistence issues and solutions]]
  * {{ :documentation:technical-whitepaper_outdoor-lorawan-gateaways_coverage-optimization_february-2023.pdf | Technical-Whitepaper_Outdoor-LoRaWAN-Gateaways_Coverage-Optimization_February-2023.pdf}}
  * {{ :documentation:technical-whitepaper_outdoor-lorawan-gateways_lightining-protection_novembre-2022.pdf | Technical-Whitepaper_Outdoor-LoRaWAN-Gateways_Lightining-Protection_Novembre-2022.pdf}}
  * {{ :documentation:an-klk03357_-_lorawan_gateways_installation_recommendations_-_v1.3.pdf |AN-KLK03357 - LoRaWAN gateways installation recommendations - V1.3.pdf}}
  * {{ :documentation:an-klk03556_v01_-_wirnet_istation_-_solar_panels_-_usb-c_power_supply_-_v1.1.pdf |AN-KLK03556 v01 - Wirnet iStation - Solar panels - USB-C Power supply - V1.1.pdf}}

==== KerOS web services documentation ====

For latest firmwares (4.1 and upper): {{ :documentation:e-con-keros_web_services-v8.6.pdf | KerOS web services documentation 8.6}}.

For 4.0.2 and 4.0.4 firmwares: {{ :documentation:e-con-keros_web_services-v5.0.pdf | KerOS web services documentation 5.0}}.

==== KerOS SMS documentation ====

For 4.x firmwares and upper: {{ :documentation:e-con-keros_sms_commands-v1.1.pdf | KerOS SMS documentation 1.1}}.

==== Accessories documentations ====

^ Reference ^ Designation ^ Description ^ Datasheet ^
^ ACCIOT-KAN00 \\     ACCIOT-KAN03 | Antenna + 1m cable + support included | Antenna kit Omni 868-915 MHz 3 dBi | {{ :documentation:datasheet_-_acciot-kan00_acciot-kan03_-_omindirectional_outdoor_868-915mhz_antenna_-_3dbi_-_v1.4.pdf |}}    |
^ ACCIOT-KAN01 \\     ACCIOT-KAN02 | Antenna + 1m cable + support included | Antenna kit Omni 868-915 MHz 6 dBi | {{ :documentation:datasheet_-_acciot-kan01_-_kan02_-_omindirectional_outdoor_868-915mhz_antenna_-_6dbi_-_v1.2.pdf |}} | 
^ KLK03198 | Antenna | Omnidirectional Outdoor 868Mhz Antenna – 3dBi | {{ :documentation:datasheet_-_klk03198_-_omnidirectional_outdoor_868mhz_antenna_-_3_dbi_-_n_male_-_v1-2.pdf |}} | 
^ KLK02843-KLK02887 | Antenna  | Indoor 868-915-923 antenna – 2dBi – SMA | {{ :documentation:datasheet_-_klk02843-klk02887_–_indoor_868-915-923_antenna_–_2dbi_–_sma_–_v0.1.pdf |}} | 
^ KLK03535 | Cable | 2,8m Ethernet cable | {{ :documentation:datasheet_-_klk03535_-_2_8m_ethernet_cable_-_v0.1.pdf |}} | 
^ KLK03536 | Cable | 2,8m USB A extension cable | {{ :documentation:datasheet_-_klk03536_-_2_8m_usb_a_extension_cable_-_v0.1.pdf |}} | 
^ KLK03559 | Cable | 2,8m USB A extension cable with reinforced shielding | {{ :documentation:datasheet_-_klk03559_-_2_8m_usb_a_extension_cable_with_reinforced_shielding-_v0.1.pdf |}} | 
^ KLK03410 | Cavity Filter | Cavity Filter - 865-870 MHz, EU coexistence LTE800, RGSM | {{ :documentation:datasheet_-_klk03410_-_cavity_filter_-_865-870_mhz_eu_coexistence_lte800_rgsm_-_v1-0.pdf |}} | 
^ ACCWM2-SDE00 | Debug Probe | Wirnet iBTS / Wirma Debug Probe | {{ :documentation:datasheet_accwm2-sde00_v1.3.pdf |}} | 
^ ACCIOT-SDE01 | Debug Probe | Wirnet iStation iFemto-evo Debug Probe | {{ {{ wiki:e-con-quick_start_guide_-_wirnet_debug_probe-v2..pdf| Wirnet Debug probe quickstart}} |
^ KLK03540 | Fixation | Stainless steel hose clamp | {{ :documentation:datasheet_-_klk03540_-_stainless_steel_hose_clamp_-_v0.1.pdf |}} | 
^ KLK02681 | POE Injector | PoE Injector 30 W indoor - AC Input - EU | {{ :documentation:datasheet_klk02681_former_acciot-inj04_klk02765_former_acciot-inj06_v1.3.pdf |}} | 
^ KLK02765 | POE Injector | PoE Injector 30 W indoor - AC Input - US | {{ :documentation:datasheet_klk02681_former_acciot-inj04_klk02765_former_acciot-inj06_v1.3.pdf |}}   | 
^ KLK02855 | POE Injector | PoE Injector 30 W indoor - 48VDC Input | {{ :documentation:datasheet_klk02855_former_acciot-inj02_v1.1.pdf |}} | 
^ KLK03505 | POE Injector | PoE Injector 30 W indoor - AC Input EU | {{ :documentation:datasheet_klk03505_v1.0.pdf |}} | 
^ KLK03506 | POE Injector | PoE Injector 30 W indoor - AC Input US | {{ :documentation:datasheet_-_klk03506_-_poe_injector_-_30_w_indoor_-_ac_input-us_-_v1.1.pdf |}} | 
^ KLK03525 | POE Injector | PoE Injector 30 W indoor - 48VDC Input | {{ :documentation:datasheet_-_klk03525_-_poe_injector_-_30_w_indoor_-_48vdc_input_-_v0.1.pdf |}} | 
^ KLK02744 | POE Injector | PoE Injector 60W EU Indoor | {{ :documentation:datasheet_klk02744_former_acciot-inj05_klk02766_former_acciot-inj07_v1.1.pdf |}} | 
^ KLK02766 | POE Injector | PoE Injector 60W US -Indoor | {{ :documentation:datasheet_klk02744_former_acciot-inj05_klk02766_former_acciot-inj07_v1.1.pdf |}} | 
^ KLK03550 | POE Injector | POE Injector 60 W indoor - AC Input | {{ :documentation:datasheet_-_klk03550_-_poe_injector_-_60w_indoor_-_ac_input_-_v0.1.pdf |}} | 
^ KLK03055-KLK03553 \\     KLK03554-KLK03555 | Power supply | Power supply cables for US, UK,AU , JP  | {{ :documentation:datasheet_-_klk03055_klk03553_klk03554_klk03555_-_power_supply_cables_-_v0.2.pdf |}} | 
^ KLK03503 | Power supply | Interchangeable blades AC/DC Power supply | {{ :documentation:datasheet_-_klk03503-_interchangeable_blades_ac-dc_power_supply_-_v0.1.pdf |}} | 
^ KLK02819 | RF Surge Protection for GSM and GPS Link | RF Surge protection - LoRa | {{ :documentation:datasheet_klk02819_former_acciot-rsp00_v1.1.pdf |}} | 
^ KLK02900 | RF Surge Protection for Lora link - Outdoor | RF coaxial Surge protection - Outdoor | {{ :documentation:datasheet_klk02900_former_acciot-rsp01_v1.1.pdf |}} | 
^ KLK02881 | Surge Protection - DC Link – Indoor | DC Input | {{ :documentation:datasheet_klk02881_former_acciot-dsp00_v1.1.pdf |}} | 
^ KLK02817 | Surge Protection for POE link - Outdoor | PoE Surge protection - Outdoor | {{ :documentation:datasheet_klk02817_former_acciot-rsp03_v1.1.pdf |}} | 
^ KLK02818 | Surge Protection for POE link - Indoor | PoE Surge protection - Indoor | {{ :documentation:datasheet_klk02818_former_acciot-rsp02_v1.1.pdf |}} | 
^ KLK03524 | - | Self-amalgamating tape - 3 meters roll length | {{ :documentation:datasheet_-_klk03524_-_self-amalgamating_tape_-_3m_-_v0.1.pdf |}} | 
^ ACCIOT-POW01 \\ KLK03610 | - | Wirnet iStation DC/DC converter with USB-C output | {{ :documentation:an_-_klk03556_v01_-_wirnet_istation_-_solar_panels_-_usb-c_power_supply.pdf |}} | 

===== Tools =====

  * {{ :resources:gen_remove_ipk-1.1.0.tar.gz |Remove IPK package}} (More information [[wiki:keros_custo:sw_updates|here]]).
  * {{ :resources:pnrcipher.py |pnrcipher.py V20171107}} (More information [[wiki:network_mana:secure_network| here]]).
  * {{ :resources:generate_hotfix_package.tar.gz |generate_hotfix_package.tar.gz}} (More information [[wiki:keros_custo:package_management#hotfix_packages|here]]).
  * {{ :resources_multi_hardware:update_liveburner_package-v5.5.4.tar.gz | update_liveburner_package-5.5.4.tar.gz}} (More information [[wiki:keros_custo:upgrade_major_version|here]]).

===== Cellular firmware (for iBTS) =====

Kerlink provides ''.ipk'' packages to install cellular firmware approved by operators.
These packages are not compatible with dual WAN modems.

^ Modem ^ company ^IPK name ^ firmware ^ configuration ^	
|MC7354|Generic|{{ :resources:wanmodemupgrade-mc7354-generic_1.1_all.ipk |wanmodemupgrade-mc7354-generic_1.1_all.ipk 	}} md5:''d9284bf8c88bdcef008ef0daf2a47fde''| SWI9X15C_05.05.58.00 | 005.025_002 |
|MC7354|ATT|{{ :resources:wanmodemupgrade-mc7354-att_1.1_all.ipk |wanmodemupgrade-mc7354-att_1.1_all.ipk 	}} md5:''e098a9481f420bf4c4e05a247748824e''| SWI9X15C_05.05.58.00 | 005.026_000|
|MC7354|Bell|{{ :resources:wanmodemupgrade-mc7354-bell_1.1_all.ipk |wanmodemupgrade-mc7354-bell_1.1_all.ipk}} md5:''357e510eceac9f7fafd9d7643322c658''| SWI9X15C_05.05.58.00 | 005.024_000|
|MC7354|Rogers|{{ :resources:wanmodemupgrade-mc7354-rogers_1.1_all.ipk |wanmodemupgrade-mc7354-rogers_1.1_all.ipk}} md5:''00083dfde61c5916eac2517f436ba03b''| SWI9X15C_05.05.58.00 | 005.022_000 |
|MC7354|Telus|{{ :resources:wanmodemupgrade-mc7354-telus_1.1_all.ipk |wanmodemupgrade-mc7354-telus_1.1_all.ipk}} md5:''f53badb852c1eaab07855ab644407d73''| SWI9X15C_05.05.58.00 | 005.023_000 |
|MC7354|Verizon|{{ :resources:wanmodemupgrade-mc7354-verizon_1.1_all.ipk |wanmodemupgrade-mc7354-verizon_1.1_all.ipk}} md5:''618ba29ff25d252e8e7c83de79515a50''| SWI9X15C_05.05.58.01 |005.029_001 |
Wirnet™ i-series

User Tools

Site Tools

Page Tools
