User Tools
Sidebar
playground:wiki3:gateway_sw_wista_3.1.8
This is an old revision of the document!
Table of Contents
Wirnet Station embedded sofware 3.1.8
This version is designed to connect Wirnet Station gateways to WMC server 3.2 or greater
They are not intended to be used with WMC servers 2.3, 3.0 or 3.1.
They are not intended to be used with WMC servers 2.3, 3.0 or 3.1.
Download
| Package | md5sum |
|---|---|
| fwupgrade_wirmav2_wirnet_v3.6_wmc_v3.1.8.tar.gz | b74737609413bb65b5f68716568da150 |
The content of this package is listed below:
| Component | Version |
|---|---|
| keros | 3.6 |
| bscc | 3.1.6 |
| lorasnmp | 3.1.4 |
| lorad | 1.1.5-1 |
| lorafwd | 1.1.3-2 |
There are 3 ways to update your gateway's software:
- by using the Magic link
- by using an USB stick
- over WMC dashboard, by using the Drag and drop feature
Software update over USB
TODO clé à mettre à jour
The update procedure uses 2 USB sticks:
- The first USB stick will upgrade the firmware to KerOS 3.6.
- The second USB stick will install all others packages with the required software release: BSCC, SNMP, Common Packet Forwarder (CPF) and OpenVPN packages.
| description | file | md5sum |
|---|---|---|
| USB stick | AUTO_DEPLOY_WISTA_3.1.8_USB_STICK.tar.gz | dbe42f3f6cc6f5aa25ad238b81357e2a |
1. Deflate twice the tar.gz file on each USB stick in the root directory
2. Copy files located in the folder AUTO_DEPLOY_WISTA_3.1.8_USB_STICKin the root directory
3. Add your OpenVPN packages in AUTO_DEPLOY_WISTA_3.1.8_USB_STICK before plugging the stick into the system.
4. Plug the first USB stick in the gateway USB slot
5. Wait the end of the update
Refer to the specific wikis to get more details (ex led management) about software update via USB sticks:
Wirnet Station: http://wikikerlink.fr/lora-station/doku.php?id=wiki:updates#usb_update_recommended
USB stick content
The USB tree should contains the following files/folders:
/
├── COMMON # KerOS products packages folder (iBTS, iFemtoCell, iStation)
│ ├── keros_***_klkgw.ipk # Keros firmware package for Wirnet iBTS
│ ├── bscc_***_klkgw.ipk # WMC BSCC package for Wirnet iBTS
│ ├── lorasnmp_***_klkgw.ipk # WMC SNMP package for Wirnet iBTS
│ ├── lorad_***_klkgw.ipk # HAL package for Wirnet iBTSpk
│ ├── lorafwd_***_klkgw.ipk # Packet Forwarder package for Wirnet iBTS
│ └── openvpn_config_wmcbeta.wanesy.com_3.1.ipk # sample file: the WMC server to connect to
├── README.txt # This file
├── usb.autorun # executed by KerOs products when plugging the USB stick
├── usbkey.txt # USB key protection: must contain the device passwords (all of them)
└── vpn_packages # WMC OpenVPN packages folder
├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk # OpenVPN package for one KerOS product to connect to a WMC platform (here wmcbeta)
├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk # another package for one KerOS product to connect to a WMC platform (here wmcbeta)
├── openvpn_secrets***_wmcbeta.wanesy.com_***.ipk # ...
├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk # ...
├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk # ...
├── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk # ...
└── openvpn_secrets_***_wmcbeta.wanesy.com_***.ipk # ...
Changelog
Main changes regards to the 3.1.6 embedded software are listed below:
- Change the embedded CPF version from 1.0.9 to 1.1.8
Please note that, if gateways use public IP, it also makes your gateway accessible from Internet on open SSH or HTTP ports (protected by passwords). Kerlink so recommends to change passwords as described in Connection, login and credentials
Warranty
CAUTION ABOUT WARRANTY:
Kerlink is not responsible for damages resulting from failure to follow these instructions relating to the Kerlink Product’s use.
Kerlink is not responsible for damages resulting from failure to follow these instructions relating to the Kerlink Product’s use.
playground/wiki3/gateway_sw_wista_3.1.8.1600778774.txt.gz · Last modified: 2020/09/22 14:46 by tda
