The content of this package is listed below:

There are 3 ways to update your gateway's software:

• by using the Magic link
• by using an USB stick
• over WMC dashboard, by using the Drag and drop feature

The update procedure uses 1 USB stick will upgrade the firmware to KerOS 3.6 and will install all others packages with the required software release: BSCC, SNMP, Common Packet Forwarder (CPF) and OpenVPN packages (see the version numbers above).

1. Deflate twice the tar.gz file on the USB stick in the root directory
2. Copy files located in the folder AUTO_DEPLOY_WISTA_3.1.8_USB_STICK to the root directory
3. Add your OpenVPN packages in AUTO_DEPLOY_WISTA_3.1.8_USB_STICK before plugging the stick into the system (if necessary ask for packages to the Kerlink support team)
4. Plug the USB stick in the gateway USB slot
5. Wait the end of the update

Refer to the specific wikis to get more details (ex led management) about software update via USB sticks:

Wirnet Station: http://wikikerlink.fr/lora-station/doku.php?id=wiki:updates#usb_update_recommended

The USB tree should contains the following files/folders:

/
├── autorun_klk.sh                                                       # executed by Wirnet Stations when plugging the USB stick
└── tmp                                                  
|    ├── mnt					 
|    |    ├──fsuser-1
|    |	      ├── dota
|    |              ├── mnt					 
|    |                   ├── fsuser-1
|    |	                       ├── dota
|    |                              ├── dota_v3.1.6_bscc.tar.gz	         # BSCC component
|    |	                            ├── dota_v3.1.4_snmp.tar.gz		 # SNMP component
|    |	                            ├── dota_cpf_1.1.8-2.tar.gz		 # SNMP component
|    |	                            └── custo_knetd-4.12.tar.gz            	    
|    ├── initramfs.cpio.gz.ubot			                         # init ramfs
|    ├── script_uboot.img				                 # U-Boot bootloader
|    └── uImage					                         # linux kernel
├── _produsb.sh                                                          # executed by Wirnet Stations after rebooting (will flash the software)
├── README                                                               # This file
└── vpn_packages                                                         # WMC OpenVPN packages folder
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz                   # OpenVPN package for one Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz                   # OpenVPN package for one Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz                   # OpenVPN package for one Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz                   # another Wirnet Station
    ├── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz                   # ...
    └── custo_openvpn_***_demoran.wanesy.fr_***.tar.gz                   # ...
  

Main changes regards to the 3.1.6 embedded software are listed below:

• Change the embedded CPF version from 1.0.9 to 1.1.8

Please note that, if gateways use public IP, it also makes your gateway accessible from Internet on open SSH or HTTP ports (protected by passwords). Kerlink so recommends to change passwords as described in Connection, login and credentials