Differences

This shows you the differences between two versions of the page.

--- wiki:introduction:quickstart [2020/04/29 11:20]
mbi [Web user interface access]
+++ wiki:introduction:quickstart [2025/09/08 15:20] (current)
ehe [What's new?]
@@ Line 1: / Line 1: @@
-====== Quick start ======
+{{ :images:spnbanner.png?nolink&300 |}}
+====== Quick start Wanesy™ SPN======
+===== Introduction =====
+Check your license version
+| **License**  | @lightgreen:Version | @lightgreen:Product |
+| **SRVLIC-SPN00**  | @lightgreen:SPN V1 | @lightgreen:Wirnet Station |
+| **SRVLIC-SPN01**  | @lightgreen:SPN V1 | @lightgreen:Wirnet iFemtoCell    |
+| **SRVLIC-SPN2x**  | @lightgreen:SPN V2 | @lightgreen:Wirnet iFemtoCell / iStation / iFemtoCell-Evolution   |
+If you have SRVLIC-SPN01 SPN V1 for **Wirnet iFemtoCell** gateway you must use the following Wiki: [[https://wikikerlink.fr/wirnet-ifemtocell-spn/doku.php?id=home|Wirnet iFemtocell SPN]].
+If you have SRVLIC-SPN00   SPN V1 for **Wirnet Station** gateway you must use the following Wiki: [[https://wikikerlink.fr/lora-iot-station-spn/doku.php?id=lorahome|IoT Station SPN]].
+===== Documentation =====
+  * Leaflet : {{ :media:Commercial_leaflet_Wanesy_SPN_V2.5.pdf |}}\\
-This section aims to guide a user through the main steps of the configuration of the Wanesy SPN firmware in order to receive data from an end-device.
-Prerequisites:
-  * Wanesy SPN installed on a gateway.
-  * Wanesy SPN license file available for the gateway.
-  * Google Chrome browser is used to connect to web user interface.
-To use an end-device with Wanesy SPN, the end-device and the gateway need to use the same LoRa configuration.
-Some parameters are common to the entire fleet and some parameters are end-device specific.
 ===== Connection to the gateway =====
@@ Line 27: / Line 48: @@
 Your computer may take some time to get the “connected” status, and the interface will have a “limited connectivity”, which is normal.
-===== Web user interface access =====
+==== Web user interface access ====
 The home web interface is accessible at the following address:
 ^ Gateway model                   ^ Address                    ^
-| **Wirnet iFemtoCell**           | ''http://klk-wifc-XXXXXX/'' |
+| **Wirnet™ iFemtoCell**           | ''http://klk-wifc-XXXXXX/'' |
-| **Wirnet iStation**             | ''http://klk-wiis-XXXXXX/'' |
+| **Wirnet™ iStation**             | ''http://klk-wiis-XXXXXX/'' |
-| **Wirnet iFemtoCell-evolution** | ''http://klk-fevo-XXXXXX/'' |
+| **Wirnet™ iFemtoCell-Evolution** | ''http://klk-fevo-XXXXXX/'' |
 Where ''XXXXXX'' are the last 6 digits of board id.
@@ Line 42: / Line 63: @@
 Once login screen displayed enter following login/password:\\
-user: ''**spn**''\\
+user: ''spn''\\
-password: ''**spnpwd**''
+password: ''spnpwd''
-===== License installation =====
+==== Network shell access (SSH) ====
+Start an SSH client (typically Putty on Windows) using the gateway’s name or IP address (the port is the standard 22).
+Default password is built using the last 6 digits of the serial number board ID: pdmk-$serialno.
+After getting a prompt: enter login/password (e.g. “''root'' / ''pdmk-**$serialno**''”).
+===== Firmware Installation =====
+  * Wanesy SPN firmware installation: [[https://wikikerlink.fr/wanesy-spn/doku.php?id=wiki:firmware:installation|click here]]
+  * Wanesy SPN firmware upgrade: [[https://wikikerlink.fr/wanesy-spn/doku.php?id=wiki:firmware:upgrade|click here]]
+  * Wanesy SPN firmware uninstall: [[https://wikikerlink.fr/wanesy-spn/doku.php?id=wiki:firmware:uninstall|click here]]
+===== SPN Configuration =====
+==== License installation ====
 To have all the features of Wanesy SPN firmware, a license file is needed.
@@ Line 51: / Line 90: @@
   * Go to ''Administration => License'' menu
   * Drag and drop license file or click on the panel to upload the license file
-  * Reboot
-===== Password update =====
+==== Password update ====
 For security reasons, Kerlink strongly advises its customers to change the default password.
@@ Line 59: / Line 99: @@
   * Update password
-===== Region configuration =====
+==== Region configuration ====
 The region where the gateway will be used needs to be configured.
@@ Line 66: / Line 106: @@
   * Validate the modification with the ''Save configuration'' button
-===== Rx configuration =====
+==== Rx configuration ====
 Gateway hardware contains 2 RF radios (0.8 MHz bandwidth for each radio). 8 multi SF channels and 1 mono SF channel can be configured on these 2 radios.
@@ Line 79: / Line 119: @@
   * Validate the modification with the ''Save configuration'' button
-===== End-device registration and activation =====
+==== End-device registration and activation ====
 End-device must be registered before receiving any data
@@ Line 87: / Line 127: @@
   * Validate the end-device with the ''Add end-device'' button
-===== Received data ====
+==== Received data ===
   * Go to ''Fleet => Received data'' to display Rx data sent by the registered end-device. Click on ''Refresh'' button if needed (bottom right corner of the page)
+===== Register to wiki update =====
+You can now register to Wiki update notifications:
+  - **Click** on the envelope icon (//Manage subscriptions//) on the right side of the page.
+  - **Choose** your option and Subscribe.
+  - **Check** your subscription by click again on the envelope icon.
+{{:images:wiki_subscribe.png?nolink |}}

Wanesy™ SPN (End Of Life)

User Tools

Site Tools

Differences

Page Tools