Introduction
Firmware management:
LoRa network management
Interfaces:
Gateway administration
Support and resources:
User Tools
Sidebar
wiki:administration
This is an old revision of the document!
Table of Contents
Administration
Many small features/configuration can be used from the Administration menu, such as reboot, halt, time configuration, password change,…
Most of them are simple enough to not be detailed.
Factory Reset
Feature Available from SPN 2.0.3
A factory reset of the gateway can be triggered. This feature recovers the last liveburner used. If a gateway has been upgraded directly from an iFemtoCell firmware to the last SPN firmware with a liveburner, then the factory reset will reinstall the last SPN firmware.
Halt
When turning off the gateway from the web interface or any other interface, the gateway is only temporarily halted (during approximately 2 min). It will reboot afterward. This feature can be used to properly stop the gateway before unplugging the power.
Configuration
Feature available from 1.1.1
The configuration of the gateway can be either downloaded or uploaded via the Main configuration tab under the Administration menu. Before uploading a configuration file, it is advised to download the current configuration to use it as a template. If some configuration fields are not present in the file, then these fields are just not updated. If an error (syntax or value) is present in the file, then the entire file is discarded.
Once a gateway is configured, the configuration can be downloaded in order to make a backup.
Field description is available here: Data JSON file
Feature available from 2.0.3
The configuration of the gateway can be reset to its default.
wiki/administration.1582282400.txt.gz · Last modified: 2020/02/21 12:02 (external edit)
