Introduction
Firmware management:
LoRa network management
Interfaces:
Gateway administration
Support and resources:
Introduction
Firmware management:
LoRa network management
Interfaces:
Gateway administration
Support and resources:
This is an old revision of the document!
How to factory reset the IoT Station SPN?
How to remove the SPN from an iFemtoCell?
What is the default login/password?
What is my SPN version?
How to find the IP address of my iFemtoCell?
I cannot access my iFemtoCell over SSH
SPN can be reset to recover it's default configuration. All received/send data, configuration, and logs will be removed. This will not remove SPN. This action is irreversible.
Factory reset is available in the station tab under the Administration menu.
To remove SPN from iFemtoCell refer to the Update page.
Refer the Quick start wiki page.
The SPN version is available on the web interface. Click on the i button in the upper right corner of the screen.
nmap
or any scanning tool from a PC connected to the same network. 192.168.4.0/24
:
$ nmap 192.168.14.0/24 | grep -i wifc Nmap scan report for klk-wifc-03002E.klksi.fr (192.168.14.164)
Once SPN is installed on an iFemtoCell SSH is disabled. To get/send data, configure, download the logs or update the gateway either use the web interface or one of the Services described here.