Introduction
Firmware management:
LoRa network management
Interfaces:
Gateway administration
Support and resources:
User Tools
Sidebar
wiki:local_ftp
This is an old revision of the document!
Table of Contents
Local FTP
Introduction
An sFTP server is installed on the gateway. It can be used to:
- Configure the station.
- Configure the end-devices fleet.
- Receive frames from end-devices.
- Transmit frames to end-devices.
- Debug / troubleshoot the station.
Its configuration is available in the Local FTP tab under the Interface menu.
FTP Connection
- Enable local FTP in the Local FTP tab under the Interface menu.
- On your computer, launch a ftp client such as FileZilla or WinSCP to connect to the server.
- Use the address of home web interface:
http://klk-wifc-YYYYYY/(YYYYYY are the 6 digits at the end of hostname/board id (upper case)). - Use port 2222.
- The login and password are the same than those of the web interface (default:
spn/spnpwd).
Structure and features
The instructions and features differ from one firmware to another. Select your firmware version to get the proper instructions:
wiki/local_ftp.1582282400.txt.gz · Last modified: 2020/02/21 15:03 (external edit)
