Introduction
Firmware management:
LoRa network management
Interfaces:
Gateway administration
Support and resources:
User Tools
Sidebar
wiki:network_interfaces
This is an old revision of the document!
Table of Contents
Network interfaces
SPN configuration is done via Ethernet or GSM.
When changing the Network configuration, make sure the configuration is correct, otherwise you might have trouble connecting to the gateway.
If the connection to the iFemtoCell is lost, the gateway will have to be formated, resulting in the loss of your data.
When connecting for the first time to the station, a DHCP server is mandatory to get an IP. SPN does not have a default static IP address.
iFemtoCell's URL
If the iFemtoCell is connected to a DNS server, then the web interface can be accessed through the address: https://klk-wifc-XXXXXX/. More information here.
If the iFemtoCell is not connected to a DNS server, then the web interface can be accessed through the iFemtoCell's IP address. If you forgot the IP address, you can retrieve it using the following methods.
Network monitoring
The current SPN version is designed to work with only one interface at a time. Failover/handover mechanism is not fully available on the network interfaces. Choosing between Ethernet, GSM and WiFi is recommended. 
Failover/handover mechanism and network monitoring should be available within the next releases.
GSM configuration
SPN contains no hardware handling GSM. However, GSM dongles can be connected to the iFemtoCell's USB port. The only compatible dongles is the HUAWEI E3372.
To access the GSM configuration:
- Connect the dongle to the iFemtoCell
- Reboot the station. The dongle is not “plug and play”. The reboot button is accessbile under the station tab in the Administration menu.
- Go to the GSM pannel in the Network tab under the Administration menu.
A list of Mobile Network Code / Mobile Country Code can be found here: mcc-mnc.com
wiki/network_interfaces.1508400392.txt.gz · Last modified: 2020/02/21 11:53 (external edit)
